FS: Complete 1.6 turbo kit, MSPNP, Full SS exhaust, etc
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Location: Buffalo, NY
Posts: 95
Total Cats: 0
FS: Complete 1.6 turbo kit, MSPNP, Full SS exhaust, etc
As stated I'm posting my COMPLETE turbo kit. This includes every single piece you need to make it run and drive with the exception of an oil drain bung for your oil return. I spent $700 on tuning alone on this, it made 241rwhp @ 11lbs on a fairly stock 1.6 long block. Everything has roughly 2k miles.
Details:
-Taco Taco cast turbo mani with relief cuts
-T3/T4 Air Technologies 50 trim turbo
-Mazda Speed 6 IWG with 10lb spring
-Stainless Steel 304 Turbo back exhaust. This was very pricey. 2.5" DP (pie-cut) that goes right into 3" the rest of the way with a vibrant muffler
-Turbo XS MBC
-Rx7 T2 550cc Injectors that were flow tested and cleaned before install
-Wells 201 Variable TPS sensor
-MSPNP 9093 with cable and all hardware to connect to PC
-GM IAT sensor (gromet style)
-Aluminum IC piping
-Intercooler (can't remember brand or size but can find out)
-Synapse BOV
-Reinforced Couplers
-10AN SS braided return line
-4AN SS braided feed line (FlyinMiata adapter included)
-Air Filter
-All vacuum line needed to properly install kit
-Heat shield (lol better than nothing!)
The only pics I have on my phone at the moment, but can send more upon request:
Price is $3000 firm plus shipping. PM or email me if you have any further questions, thank you.
italiano1390@gmail.com
Details:
-Taco Taco cast turbo mani with relief cuts
-T3/T4 Air Technologies 50 trim turbo
-Mazda Speed 6 IWG with 10lb spring
-Stainless Steel 304 Turbo back exhaust. This was very pricey. 2.5" DP (pie-cut) that goes right into 3" the rest of the way with a vibrant muffler
-Turbo XS MBC
-Rx7 T2 550cc Injectors that were flow tested and cleaned before install
-Wells 201 Variable TPS sensor
-MSPNP 9093 with cable and all hardware to connect to PC
-GM IAT sensor (gromet style)
-Aluminum IC piping
-Intercooler (can't remember brand or size but can find out)
-Synapse BOV
-Reinforced Couplers
-10AN SS braided return line
-4AN SS braided feed line (FlyinMiata adapter included)
-Air Filter
-All vacuum line needed to properly install kit
-Heat shield (lol better than nothing!)
The only pics I have on my phone at the moment, but can send more upon request:
Price is $3000 firm plus shipping. PM or email me if you have any further questions, thank you.
italiano1390@gmail.com
#10
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Location: Buffalo, NY
Posts: 95
Total Cats: 0
Understandable.
Basically I drive the car 4-5 times a week and really enjoy the turbo setup but want more. I'd like to Kswap it so I want this to go all at once. If someone wants the entire turbo setup without MS then maybe that's a possibility as I have had a few emails already on the MS. Not sure what a fair price without it would be but I know I'd like to get $3k total.
Basically I drive the car 4-5 times a week and really enjoy the turbo setup but want more. I'd like to Kswap it so I want this to go all at once. If someone wants the entire turbo setup without MS then maybe that's a possibility as I have had a few emails already on the MS. Not sure what a fair price without it would be but I know I'd like to get $3k total.
#13
Hi there!
I just created an account because I picked up a 91 BRGSE MX5 yesterday. My goal is to possibly run a turbo on a fairly stock motor just to give it a bit more power to have fun with (for now).
I cant PM you due to lack of post count. Can you PM me or shoot me an email at fastcar94z@hotmail.com so I can ask you a few questions about this?
Cheers!
Derek
I just created an account because I picked up a 91 BRGSE MX5 yesterday. My goal is to possibly run a turbo on a fairly stock motor just to give it a bit more power to have fun with (for now).
I cant PM you due to lack of post count. Can you PM me or shoot me an email at fastcar94z@hotmail.com so I can ask you a few questions about this?
Cheers!
Derek
#14
Junior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2010
Location: Buffalo, NY
Posts: 95
Total Cats: 0
Hi there!
I just created an account because I picked up a 91 BRGSE MX5 yesterday. My goal is to possibly run a turbo on a fairly stock motor just to give it a bit more power to have fun with (for now).
I cant PM you due to lack of post count. Can you PM me or shoot me an email at fastcar94z@hotmail.com so I can ask you a few questions about this?
Cheers!
Derek
I just created an account because I picked up a 91 BRGSE MX5 yesterday. My goal is to possibly run a turbo on a fairly stock motor just to give it a bit more power to have fun with (for now).
I cant PM you due to lack of post count. Can you PM me or shoot me an email at fastcar94z@hotmail.com so I can ask you a few questions about this?
Cheers!
Derek
Thread
Thread Starter
Forum
Replies
Last Post
Dustin
Miata parts for sale/trade
4
09-23-2015 10:34 PM
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM