Bosch BOVz with intercooler piping
 

The AL pipe is about 15.5" total length, with ~25* bend halfway. The BOV is 90* to that bend, and about 4" from the end. On the opposite end of the pipe, the end kicks up about 30* in the same plane as the BOV (90* to the 25* bend.

The black steel pipe has a 95* bend in it with a CLR of about 4". The BOV is about 2" in from one end, and the other end is straight for about 2" after the bend. The BOV is about 20* up from the plane of the 95* bend.


Both are 2" OD pipe, come with 3" of hose for the BOV, and clamps. $45 for either one plus actual shipping, should be about $15. Sorry for the confusing descriptions, no easy way to do it.

Reasonable offers?

what kind of intercooler will this piping fit?

It's 2' pipe, so I guess it would fit anything given some reducers.

Will it fit the starion intercooler?

Haven't recieved the starion intercooler yet but should be coming in soon, so just asking to make sure.

The Starion is 1 7/8", so it can work with 2" pipe. I'm using a starion and 2" pipe, so it can be done. I think the black steel pipe would work well on the pass side going around the side of the radiator.