NA turbo parts including ECU
02-08-2013, 03:31 PM
#1
Junior Member
Thread Starter
Join Date: Aug 2012
Location: Santa Fe, NM
Posts: 99
Total Cats: -24
NA turbo parts including ECU
decided not to turbo the miata seeing as i will be selling her so i am putting all my turbo parts up for sale.
starting with
TD04L off a WRX- has absolutely ZERO shaft play in any direction. I bought it locally from someone who bought a wrx and took the turbo off immediately. this turbo will spool very early and is great for someone looking to have early spool on the 1.6 motor
custom log manifold- i had a friend of mine locally make this for me, all the parts are from a company named weirtech based in canada. The manifold has a td04 outlet flange. will need some porting on the outlet area but is a solid piece and will flow well. FOR A 1.6L
Straitified automotive PNP ECU- i bought this to use with the turbo because it is a microsquirt ecu. I never ended up using it so it still is brand new, also has the cable to connect to the computer to datalog. here is their website so you can read details.
normally retails for 600 with the cable.
http://www.stratifiedauto.com/index....7u1cfgmqbce5i2
green top supra injectors- never ran them, were cleaned by the guy i bought them from, will need new orings on the bottom.
Turbo oil feed line- bought this off of ebay because finding oil feed lines for the td04 that will fit the miata is a pain in the ***. never used.
oil return line- the line is a high temp high pressure line from treadstone along with the fitting to attach to the turbo. never used.
downpipe- i have a generic downpipe that i bought from someone elses 1.8 turbo setup. However the downpipe does have a crack in it and needs to be rewelded. other then that no issues. I have a flange for the downpipe to attach to a td04 like this one.
HKS- i am assuming that this is a fake hks i have never used it but more then likely it is.
CX Racing Tube and fin intercooler- bought this because i did not need a massive ic for a smaller turbo, never been used! the dimensions are 18in long from endtank to endtank by 12in high by 3in thick.
IC piping setup- custom made setup from the same friend that made the manifold. this setup is complete on the turbo side of the IC. it runs up the front and over the radiator so that PS and AC can be kept. The piping on this side is 2.5in. HOWEVER we only finished this side, the other side is still not completed i DO have all the piping including 3in piping for the bov side. this will need to be fiddled with tho to make everything fit.
WILL INCLUDE A CRAP LOAD OF SILICONE COUPLARS
not sure on pricing just threw this number out there.
would love to sell everything together for a discounted price of 1280 shipped to your door. . let me know if your interested, shipping all together as one is prefered. but may part out in the near future.
Ecu is sold so will sell everything else together for a discounted price or may part depending on the price
starting with
TD04L off a WRX- has absolutely ZERO shaft play in any direction. I bought it locally from someone who bought a wrx and took the turbo off immediately. this turbo will spool very early and is great for someone looking to have early spool on the 1.6 motor
custom log manifold- i had a friend of mine locally make this for me, all the parts are from a company named weirtech based in canada. The manifold has a td04 outlet flange. will need some porting on the outlet area but is a solid piece and will flow well. FOR A 1.6L
Straitified automotive PNP ECU- i bought this to use with the turbo because it is a microsquirt ecu. I never ended up using it so it still is brand new, also has the cable to connect to the computer to datalog. here is their website so you can read details.
normally retails for 600 with the cable.
http://www.stratifiedauto.com/index....7u1cfgmqbce5i2
green top supra injectors- never ran them, were cleaned by the guy i bought them from, will need new orings on the bottom.
Turbo oil feed line- bought this off of ebay because finding oil feed lines for the td04 that will fit the miata is a pain in the ***. never used.
oil return line- the line is a high temp high pressure line from treadstone along with the fitting to attach to the turbo. never used.
downpipe- i have a generic downpipe that i bought from someone elses 1.8 turbo setup. However the downpipe does have a crack in it and needs to be rewelded. other then that no issues. I have a flange for the downpipe to attach to a td04 like this one.
HKS- i am assuming that this is a fake hks i have never used it but more then likely it is.
CX Racing Tube and fin intercooler- bought this because i did not need a massive ic for a smaller turbo, never been used! the dimensions are 18in long from endtank to endtank by 12in high by 3in thick.
IC piping setup- custom made setup from the same friend that made the manifold. this setup is complete on the turbo side of the IC. it runs up the front and over the radiator so that PS and AC can be kept. The piping on this side is 2.5in. HOWEVER we only finished this side, the other side is still not completed i DO have all the piping including 3in piping for the bov side. this will need to be fiddled with tho to make everything fit.
WILL INCLUDE A CRAP LOAD OF SILICONE COUPLARS
not sure on pricing just threw this number out there.
would love to sell everything together for a discounted price of 1280 shipped to your door. . let me know if your interested, shipping all together as one is prefered. but may part out in the near future.
Ecu is sold so will sell everything else together for a discounted price or may part depending on the price
Last edited by coltonr; 02-11-2013 at 11:46 PM.
Reply
-1
-1
02-10-2013, 08:21 PM
#9
Junior Member
Thread Starter
Join Date: Aug 2012
Location: Santa Fe, NM
Posts: 99
Total Cats: -24
yes this includes pretty much everything all you will need will be an iat sensor which is 22 bucks and to get the downpipe fixed. I have a downpipe but it is twisted incorrectly becuase it was for a 1.8 but i have the oulet flange so all you will need is to tweak the downpipe and put the flange on. other then that just a pipe for the intake, i already have a filter for it.
Reply
-1
-1
