complete stainless steel line set group buy?
#141
Just wanted to let everyone know that I'm just about finished with my auto to manual swap, just need to get the car to start, stupid wiring.
I purchased the Isis auto to man line that I listed in one of the links above from enjuku racing and it fits the car perfectly. I got a really good deal b/c they are local and had it on hand in the store. It isn't nylon coated but I could beat $30 bucks for a line that runs all the way from the mc to the slave.
Summary: thread pitches are the same between the 240 and Miata slave and MC so if you want a braided line to run between them order the Isis or Auto Power from EnjukuRacing.com.
I purchased the Isis auto to man line that I listed in one of the links above from enjuku racing and it fits the car perfectly. I got a really good deal b/c they are local and had it on hand in the store. It isn't nylon coated but I could beat $30 bucks for a line that runs all the way from the mc to the slave.
Summary: thread pitches are the same between the 240 and Miata slave and MC so if you want a braided line to run between them order the Isis or Auto Power from EnjukuRacing.com.
#145
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
ill find out on tuesday when i pick up the remaining lines, shouldn't be a problem though, but ill let you know if anything is amiss...
ripracer: appreciate the ^^^, also no worries we are all car people and drive the same particular little cars, more options is always better!!... lol... as for hardline delete... i.e. the line running directly from the master to slave is an interesting option, and you're totally right, i can't touch that 30 dollar price.... the curly q delete line that runs from the fire wall to the slave is 35 through this group buy... that is also the reason why i recomended doing this locally, as it is difficult to get the exact measurement you were talking about... the way i measured it, the line would have been like 8 feet long... lol... how long was the line that you ended up getting?
again be careful, make sure it is securly fastened down, having line that long will flex the actual line causing some loss in hydraulic pressure... think of sand rails that have stainless lines that run the entire length of the car... they loose a lot of pressure, and sure the line you are running isn't as long, but i woud be carefull...
+1 on the coating, or get some proper wire wrap or something...
superslow, appreciate the support...
-james
again be careful, make sure it is securly fastened down, having line that long will flex the actual line causing some loss in hydraulic pressure... think of sand rails that have stainless lines that run the entire length of the car... they loose a lot of pressure, and sure the line you are running isn't as long, but i woud be carefull...
superslow, appreciate the support...
-james
#146
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
wassup everyone, the rear lines weren't ready today, they are waiting for the dot parts, that fit on the lines....
so i have a question for you all... is it cool, if i start shipping out the sets that are ready tomorrow?
and i was planning on shipping it in the order that people signed up...
let me know if that is ok with everyone...
-james
edit: ups was supposed to deliver them last friday, and have been laggin...
so i have a question for you all... is it cool, if i start shipping out the sets that are ready tomorrow?
and i was planning on shipping it in the order that people signed up...
let me know if that is ok with everyone...
-james
edit: ups was supposed to deliver them last friday, and have been laggin...
#153
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
update
hey all sorry about the delay... i volunteer for habitat for humanity, and we are doing a build at the los angeles county fair... i was there all day today, and will be there all day friday... if any of you are in the socal area, stop on by, we are behind building number 9 and we are actually building one of the homes during the duration of the fair.... come and support a good cause if you are local...
i know... yada yada yada....
anyways... i just finished packaging up the first batch and the following people are being sent their ****...
hustler (i know i'm gonna get **** about this from you) but i'm not sending out your set yet, because it is part of the 18 rear lines that I am waiting for... you were the odd man out so to speak... and you can call me whatever name in the book... ill make it up to you by NOT including naked pictures of me in your package....
the following people should be getting a pm, with their tracking/delivery confirmation numbers tomorrow... alta racer, i am holding your set as we discussed....
1. superslow 1 full set
2. crxican 1 full set
3. disturbedfan121 1 full set
4. disturbedfan121 1 full set
5. disturbedfan121 1 brake set
6. scottfw 1 clutch line
7. cococarbine3 1 full set
8. longuyen88 1 full set
9. druz 1 full set
10. shothang 1 full set
11. Fidgitk s 1 full set
12. stevo11 1 full set
13. kjr50 (dur, i requested your clutch line to be made, but then realized i had two prototypes... lol... so yeah... you'll get yours) 1 clutch line
people who are still waiting...
1. hustler 2 rear lines
2. flipt86 1 full set
3. scott v 1 full set
4. mad doc 1 full set
5. bradc 1 full set
6. alta racer (holding)
7. js roadster 1 full set
8. amagalla 1 full set
i'lll be going down to the manufacturer again tomorrow, to bitch and whine...
-james
i know... yada yada yada....
anyways... i just finished packaging up the first batch and the following people are being sent their ****...
hustler (i know i'm gonna get **** about this from you) but i'm not sending out your set yet, because it is part of the 18 rear lines that I am waiting for... you were the odd man out so to speak... and you can call me whatever name in the book... ill make it up to you by NOT including naked pictures of me in your package....
the following people should be getting a pm, with their tracking/delivery confirmation numbers tomorrow... alta racer, i am holding your set as we discussed....
1. superslow 1 full set
2. crxican 1 full set
3. disturbedfan121 1 full set
4. disturbedfan121 1 full set
5. disturbedfan121 1 brake set
6. scottfw 1 clutch line
7. cococarbine3 1 full set
8. longuyen88 1 full set
9. druz 1 full set
10. shothang 1 full set
11. Fidgitk s 1 full set
12. stevo11 1 full set
13. kjr50 (dur, i requested your clutch line to be made, but then realized i had two prototypes... lol... so yeah... you'll get yours) 1 clutch line
people who are still waiting...
1. hustler 2 rear lines
2. flipt86 1 full set
3. scott v 1 full set
4. mad doc 1 full set
5. bradc 1 full set
6. alta racer (holding)
7. js roadster 1 full set
8. amagalla 1 full set
i'lll be going down to the manufacturer again tomorrow, to bitch and whine...
-james
#157
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
update, everyone who had their **** shipped out should have gotten a pm with a tracking number...
GOOD NEWS: the rest of the lines were ready today, so i have everything to ship...
BAD NEWS: I will be doing the habitat stuff all day tomorrow, but i might be able to ship them during the lunch break or something... eitherway the rest of the orders will ship by sat. the latest...
-james
GOOD NEWS: the rest of the lines were ready today, so i have everything to ship...
BAD NEWS: I will be doing the habitat stuff all day tomorrow, but i might be able to ship them during the lunch break or something... eitherway the rest of the orders will ship by sat. the latest...
-james
#158
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
soon... real soon... i ordered a part on line, and from there we will be making a prototype... so... we should have something sometime next week or the week after... and for prototyping purposes we already have two cars lined up...
1. supercharged miata (i know... i know) but this **** is tracked at least once a month...
2. a stock miata also tracked regularly...
edit: fyi, i don't prototype on my own car... dunno why... lol...
1. supercharged miata (i know... i know) but this **** is tracked at least once a month...
2. a stock miata also tracked regularly...
edit: fyi, i don't prototype on my own car... dunno why... lol...
#159
Junior Member
Thread Starter
iTrader: (12)
Join Date: Sep 2008
Location: Inland Empire So-Cal
Posts: 274
Total Cats: 0
update
wassup yall,
everyone should have gotten a pm now with tracking infor for their ****...
thanks again everyone for participating, and ill start a new thread in the for sale section for the next group buy...
as a hint: the next group buy is going to have billet parts, and will be available in black, red, and blue... lol...
if you have any questions or issues feel free to pm me, email: photoclubb@hotmail.com and or post in this thread...
ALSO ALL THE FITTING ARE ONLY HAND TIGHT, SO MAKE SURE YOU TIGHTEN ALL YOUR LINES!!!
i am also in the process of leaving everyone itrader feedback, but i can only do three a day...
-james
everyone should have gotten a pm now with tracking infor for their ****...
thanks again everyone for participating, and ill start a new thread in the for sale section for the next group buy...
as a hint: the next group buy is going to have billet parts, and will be available in black, red, and blue... lol...
if you have any questions or issues feel free to pm me, email: photoclubb@hotmail.com and or post in this thread...
ALSO ALL THE FITTING ARE ONLY HAND TIGHT, SO MAKE SURE YOU TIGHTEN ALL YOUR LINES!!!
i am also in the process of leaving everyone itrader feedback, but i can only do three a day...
-james