Yeah, I know he's not making a profit, like I said I'm not being a dick, I was just really hoping it would be cheaper. It is a fantastic design though. Maybe if you guys can get a good little group buy going we could eventually get a small production run going and kick Begi's butt, MiataTurbo style ;)
|
Yea, but he's also making 5. If he was making 500, the cost would be much lower than $90.
I priced building Begi's spacer at my local CNC shop. It was $120, after programming and process planning. If I could have made twenty, it would have went down to $60 or less. |
2 Attachment(s)
Here's the final list:
1) skou 2) stefanst 3) Dahl460 4) ianboyd 5) UrbanSoot 6) bcrx7 (partial kit) Bits and pieces already arriving! https://www.miataturbo.net/attachmen...1&d=1404780962 |
Originally Posted by skou
(Post 1146308)
Here's the final list:
4) ianboyd I'm pretty excited for this. |
Im sad that I couldn't join on the fun :(
|
I'm sorry to be sort of out of the topic. But I was thinking of using the kia thermostat housing someone mentioned before and taping it to install the heater outlet and the stock coolant sensor. And installing the thermostat in the actual house using "Meziere Inline Thermostat Housings". Is that possible? I know it is very thigh back there and I don't want to remove the engine or the engine head.
|
Originally Posted by Dav1d
(Post 1146666)
I'm sorry to be sort of out of the topic. But I was thinking of using the kia thermostat housing someone mentioned before and taping it to install the heater outlet and the stock coolant sensor. And installing the thermostat in the actual house using "Meziere Inline Thermostat Housings". Is that possible? I know it is very thigh back there and I don't want to remove the engine or the engine head.
Mazda Miata Coolant Reroute Housing There's probably 6 years worth of discussion on the topic of doing coolant reroutes on a Miata. Stop being lazy, search and go read it. |
Originally Posted by skou
(Post 1146668)
The Kia housing doesn't have enough wall thickness to tap it for the heater and sensor ports. You want something like this:
Mazda Miata Coolant Reroute Housing There's probably 6 years worth of discussion on the topic of doing coolant reroutes on a Miata. Stop being lazy, search and go read it. By the way. I've been reading. But it's imposible to read (as you said) There's probably 6 years worth of discussion on the topic of doing coolant reroutes on a Miata. Stop being lazy, search and go read it.[/QUOTE] While having a life and working in a Doctorate Degree if I plan on doing this before I get bored of the car and sell it. This was my first post thanks for being this "Nice". |
Pricing for the Thermostat Cover came in at $98 each. So, for a complete kit the total with shipping and PayPal fees is $391. The partial kit for bcrx7 is $239.
I have a meeting with the machinist tomorrow to go over the designs and make sure there are no concerns from his end. |
Excellent!
|
Would then spacer clear the egr line? I know you can bend the pipe but if it clears it would be nice not to temper the emissions hardline.
|
Originally Posted by hmongmiatanb
(Post 1148348)
Would then spacer clear the egr line? I know you can bend the pipe but if it clears it would be nice not to temper the emissions hardline.
|
Roger. I have a cnc machinist at my disposal. Gonna attempt one that clears the egr line.
|
Originally Posted by hmongmiatanb
(Post 1148462)
Roger. I have a cnc machinist at my disposal. Gonna attempt one that clears the egr line.
|
One of the guys backed out of buying a complete kit, so there's one available if anyone is interested.
|
Pm sent.
|
Originally Posted by skou
(Post 1148713)
One of the guys backed out of buying a complete kit, so there's one available if anyone is interested.
|
Originally Posted by silvermazda
(Post 1151416)
Only looking for the donut, kia spout and front block off plate.
|
Totally understand. This message was more oriented toward those who want to start a mini group buy.
|
I think you misunderstand me, silvermazda. I am not looking to do a group buy, just pointing out that BEGI is hosing everyone on that part by pricing it just below the cost to build a single unit for yourself.
Skou, if silvermazda is interested in buying your thermo housing and spacer, I'll take the water pump inlet from the last kit, so you could have it fully sold. |
Bump for updates....if any lol. Im pretty excited for machined parts pictures.
|
I think he said 6 weeks, so we have a couple of more weeks to go! Looking forward to it! I can get rid of my leaky stainless to aluminum flange!
|
Originally Posted by bcrx7
(Post 1153654)
I think he said 6 weeks, so we have a couple of more weeks to go! Looking forward to it! I can get rid of my leaky stainless to aluminum flange!
|
Sorry for the lack of feedback. I've been out of the country for the last couple of weeks. I'll call the machine shop this week and find out where they are at.
One set is still available by the way.... |
Edit: Square top is not available. |
Originally Posted by TheScaryOne
(Post 1155912)
I'll trade you a square top straight across for the last set.
|
I would be interested in the water pump inlet housing if not to late.
|
Ok we are coming up on 6 weeks here. Have you had a chance to talk to the machine shop on their progress?
|
Will start cutting metal this week.
|
Looks good! One day I'll need one of those when I give up on my bleeder screw.
|
Awesome!
|
Last set sold to DazedandConfused.
|
I am dissapoint. Get mah big vacation check tomorrow. :(
Time for sexy machined parts pictures! |
Originally Posted by skou
(Post 1158295)
Will start cutting metal this week.
|
Originally Posted by iantboyd
(Post 1161308)
Did anything happen? :)
|
The shop told me today that they still haven't started! I'm more than a little annoyed, but not much I can do since they already have 50% payment. I'll keep pushing....
|
Machine shops will always push out the mass before the little guys. If I were you I would find someone else. I personally have a cnc buddy and he has access to all sort of machinery. I have the solid works program at home... Any competent cnc machinist can setup the cnc and run these through in a day.
1 thing is I learned that shops will bid on jobs and small jobs don't really interest many. |
I'm also happy to help, I have some friends in this area. Thats how production rolls though... never on time! :)
|
I can still offer my buddy's help in NJ. He would have them done in less than 10 days.
Send me the drawings and the price and he'll tell you tomorrow, if he can match it (or improve on it). |
Cool, can you add a water pump inlet piece to the list? lol
|
Making chips!
|
Originally Posted by skou
(Post 1163339)
Making chips!
|
Seriously why don't you buy a laser printer, make a casting of these parts in plastic, contact a chinese supplier and reproduce them in large quantities. Seriously I just gave you an insight as to how is done and you can make great profit on these beautiful pieces.
You have great product in your hands. |
Seriously! lol
I look forward to pics! |
2 Attachment(s)
|
Oh My..... :')
|
Ian needs a break now... haha!
|
Originally Posted by StealthNB
(Post 1163506)
Seriously why don't you buy a laser printer, make a casting of these parts in plastic, contact a chinese supplier and reproduce them in large quantities. Seriously I just gave you an insight as to how is done and you can make great profit on these beautiful pieces.
You have great product in your hands. |
4 Attachment(s)
Thermostat housings are done...
https://www.miataturbo.net/attachmen...1&d=1410204657 https://www.miataturbo.net/attachmen...1&d=1410204657 |
Originally Posted by skou
(Post 1165197)
Thermostat housings are done...
|
What is the width and depth of the groove machined into the spacer for the thermostat?
EDIT: Nevermind, didn't search hard enough |
I check this section hourly for more CNC p0rn...
|
Sorry guys. The latest excuse I'm getting is that two out of three machining centers are down for repairs!
|
2 Attachment(s)
Spacers...done!
Don't worry about the AN6 ORB fitting in the M12x1.5 sensor port. I have been assured they didn't try to thread it in. https://www.miataturbo.net/attachmen...1&d=1411269837 |
I was just thinking about this. Thanks for the update. I love this stuff.
|
Great Work man,. You have to groove the spacer in order for the T-stat to sit as flat as possible. For reference look at the rear of any miata cylinder head.
|
Originally Posted by StealthNB
(Post 1168941)
Great Work man,. You have to groove the spacer in order for the T-stat to sit as flat as possible. For reference look at the rear of any miata cylinder head.
|
Looking good! I am not using a T-Stat, so they can leave the groove out if possible!
|
Parts are done! Picking them up in the morning. Hope to have everything sorted, packed and in the mail tomorrow.
|
14 Attachment(s)
So, I pick up the parts and when I go to test fit everything, I find this...
https://www.miataturbo.net/attachmen...1&d=1411676082 They forgot to tap the AN16 ORB port on the water pump inlets! :facepalm: It'll now take another day for them to finish. Anyhow, the rest of the parts look great and fit perfectly. https://www.miataturbo.net/attachmen...1&d=1411676082 https://www.miataturbo.net/attachmen...1&d=1411676082 https://www.miataturbo.net/attachmen...1&d=1411676082 https://www.miataturbo.net/attachmen...1&d=1411676082 https://www.miataturbo.net/attachmen...1&d=1411676082 https://www.miataturbo.net/attachmen...1&d=1411676082 |
All times are GMT -4. The time now is 07:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands