Feeler on 1.6 built motor/custom turbo setup
I've been throwing the idea of an LSx swap back and forth for awhile now, but I guess the biggest issue is whether there is any interest in the current drivetrain so here is the feeler. If I find a buyer for the turbo setup and built motor then I'll probably part it all out and go LSx so looking to see if there is any interest. All located right by Philadelphia, PA.
1.63L built motor with worked head with less than 1k miles - forged pistons, Wiseco rods 8:1 comp ratio, pistons coated, billet oil pump gears, ARP fasteners, head has Integral cams and swapped to solid lifters with shim under bucket, upgraded valvetrain with headwork - $2500 custom Flipside ramhorn turbo setup with 2871 v-banded housing and 38mm Tial WG (9psi spring) and 3" separated WG downpipe as well as midpipe with high flow cat, all fittings/lines - $2000 More info in my build thread here: https://www.miataturbo.net/forum/t29857/ Any questions PM/e-mail me. Help a brother go LSx! |
Your setup is good for well over 300whp. Why would want to change it out just after you got it finished?
BTW. Those prices are an absolute steal! |
Righteous prices- somebody help the poor guy out! ;)
|
Damn, if you were closer I'd grab that motor. For the price of the machine work and parts I still need for my build, that would be about the same and already complete.
|
I want the motor sooo bad.
Little out of my range though. |
How much for the intake mani! Dibs!
|
Good price on that motor, if it doesn't sell soon I will have to take you up on the deal. GLWS
EDIT: Price of tranny? And what are the specs on the cams? |
the motor price is intense....the head cost almost that much to put together.
|
pm'd on motor! :)
|
So you people know, it cost me over 5k in parts and machine work to build that motor. To say that price is a steal is such an epic understatement. It has:
Wiseco forged pistons Belfab rods MMS shim under bucket lifters Supertech valves Supertech springs/retainers Head is fully ported Combustion chambers and exhaust ports are ceramic coated Pistons have ceramic top coat, dry film skirt, oil shedding bottom coat 5 angle valve job the entire block was gone over and machined including deck, bore/hone, align hone, etc... crank, crank pully dynamically balance to 10k rpm pistons and rods balanced ACL bearings Cometic HG ARP head studs Miataroadster billet OP gears Shimmed OP for higher pressure Custom grind Integral Cams with ~10mm lift, 262 dur I'm sure I'm missing something. Needless to say, very few things on it are stock. Add up all those parts, >$1200 in machinework, and other labor like clearancing the shims and assembly and you will be over 5k. |
may i ask how much you paid for your flipside custom manifold and DP new?
|
I would steal my buddy's ls for that 1.6! :cjerk: Hope you find a cool buyer man.
|
Damn, I wish that turbo setup would fit a 1.8...
|
If you were running a stock 1.8, this would be worth swapping in for the price IMO and selling your 1.8 junk. Is that crazy? ;)
|
Anybody have that link to the place you can sell a kidney online?
|
Wow on the price. What a deal on an engine and a top quality amnifold. Why not turn up the boost some more before parting? Me no compende ur rationale.
|
dam wish i had the cash...
|
Tom...need another car?
I've got a 92 Miata that should sell for the cost of those. :) |
Before peeps get all excited, read the title, it says feeler. I am seriously on the fence about a LS swap so I figured if there were buyers for the big items, that it would be worth parting out the car. I do not have any plans to ship the motor as crating it up as well as shipping is kind of a pita. The turbo setup would be easy to ship. If it went quick and local, I figured it would sway me one way or the other. As of now looks like it's staying in the car, which I guess in the grand scheme of things is not so terrible. ;)
|
I'd run with the setup you have now. Had the cost of a built 1.6 and a 6 speed not been more $$ then the LS1 build, I would of gone that route. Its a rush hearing an engine boosting well past 20psi *remembers DSM days*
|
All times are GMT -4. The time now is 08:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands