Jeff_man racing MP62 kit (99-04)
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
Jeff_man racing MP62 kit (99-04)
MP62 twin screw for MOSS
Jackson Racing 4-2-1 header for a 01+ (will source you a 99 egr if you have a 99/00)
TDR belt tensioner
TDR FMIC with radiator cover
Greddy Type S BOV
JMR throttler body relocation kit
52 and 56mm nose pulley
All mounting needed for an NB
Moss dummy throttle body and idle air relocation kit that was included in original kit.
DeatschWerks 325cc injectors
$2500 as kit only (shipped)
Stock 99 block with kit and 56MM makes over 250hp and 215ftlb with a MS2 (spark pulled to keep car at 250hp for stock rod heath)
Kit has less then 10k miles and has been opened up to reoil and regrease at about 7k miles.
The bov and tb relocation allows for making boost faster, fixes all the idle issues hot side MOSS/TDR kits have, throttle response is amazing, and it sounds cooler.
Adding the bov/stock location throttle was good for 10hp
Video shot testing 3 years ago with old cell phone
Sorry Greasemonkey2000, my kits way better then your's
Last edited by jeff_man; 09-08-2014 at 01:34 PM.
#6
Can you send me a PM. I am interested but can you send me more images of the kit and if you have any details on the regrease/reoil?
#7
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
you need 10 post I think to message users.
Here are 2 photos I could find off facebook real fast that should help.
This photo I marked where you grease the screws and found a youtube of a oil change on a lotus but I did it when the unit off the car and open.
#9
I'm new here, so can't message apparently... I want my miata to be faster but probably shouldn't spend the money... Feel free to convince me otherwise. Or consider a trade for an sv650!
#10
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
I don't need to convince you, 250-300whp bolt on with ecu is all the convincing you should need. An unlike every other mp62 miata in the world, this kit ideas like stock.
#12
I'm sure this is frowned upon but I simply do not have enough to say to fill 15 posts without being super annoying. So I'd rather take the lesser of two evils and stick around here. If you're able to PM me or shoot over an email address I'd love to talk further about the kit and hopefully do business asap. Thanks!
#13
Elite Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Dallas, Tx
Posts: 3,006
Total Cats: 103
Send me a message on our build facebook page and I will give you my info. https://www.facebook.com/NMHFR
#14
...
MP62 twin screw for MOSS
Jackson Racing 4-2-1 header for a 01+ (will source you a 99 egr if you have a 99/00)
TDR belt tensioner
TDR FMIC with radiator cover
Greddy Type S BOV
JMR throttler body relocation kit
52 and 56mm nose pulley
All mounting needed for an NB
Moss dummy throttle body and idle air relocation kit that was included in original kit.
DeatschWerks 325cc injectors
...
Stock 99 block with kit and 56MM makes over 250hp and 215ftlb with a MS2 (spark pulled to keep car at 250hp for stock rod heath)
...
MP62 twin screw for MOSS
Jackson Racing 4-2-1 header for a 01+ (will source you a 99 egr if you have a 99/00)
TDR belt tensioner
TDR FMIC with radiator cover
Greddy Type S BOV
JMR throttler body relocation kit
52 and 56mm nose pulley
All mounting needed for an NB
Moss dummy throttle body and idle air relocation kit that was included in original kit.
DeatschWerks 325cc injectors
...
Stock 99 block with kit and 56MM makes over 250hp and 215ftlb with a MS2 (spark pulled to keep car at 250hp for stock rod heath)
...
#16
Hi, I'm interested in the sc kit. Please text 562 353 749 three or email phdexotics@gmail.com. Thanks
Thread
Thread Starter
Forum
Replies
Last Post