|
FS: 1.6L Greddy partial turbo kit, Begi FMU, injectors, misc. 1.6 parts
Alright peoples, time to sell some leftover 1.6L stuff. All the parts are in really good shape unless specified and work flawlessly. Items are located 20 minutes south of Chicago for the locals who are interested. Prices are firm and include shipping to the lower 48 states. Shipping to USA only. PM me with your location for a shipping quote to Alaska or Hawaii or for more pics. Feel free to ask any questions. Sorry about the pics, I have a crappy camera.
1. Greddy partial turbo kit. Includes: Mitsubishi TD04-15G turbo Greddy manifold downpipe cast intake elbow cast charge elbow banjo bolt and copper washers(for feed) drain fitting 2" blue silicone(compressor outlet) 2.75 blue silicone(AFM to intake) turbine inlet, outlet and drain gasket 4 psi internal waste gate The turbo is in great shape with normal shaft play for a journal bearing unit. Spins freely, no leaks, no wheel rubbing. The manifold is cracked between the number 2&3 runners and has been rewelded. It seeps a little but is not noisy. Relief cuts in the flange. The old studs were stripped but replaced with threaded bushings and new studs. It's solid and seals good. A good starter kit for someone to get their feet wet. $500.00 http://img820.imageshack.us/img820/562/im000539.jpg http://img4.imageshack.us/img4/964/imag0066pd.jpg http://img824.imageshack.us/img824/1961/im000530.jpg http://img88.imageshack.us/img88/2555/im000561.jpg http://img808.imageshack.us/img808/4875/im000563.jpg http://img808.imageshack.us/img808/1130/im000562.jpg 2. Begi 2025 RRFPR in near perfect shape and only used for a short time. Anodized blue, 1/8 NPT in/out. $160.00 Includes: regulator mounting bracket fittings check valve http://img716.imageshack.us/img716/8430/imag0065q.jpg http://img718.imageshack.us/img718/1391/imag0064mx.jpg 3. (4)-550cc Rx-7 purple top injectors in great shape. Denso #1995500-2020 high ohm $130.00 SOLD http://img210.imageshack.us/img210/3844/im000577.jpg 4. (4)-460cc RX-7 red top injectors in great shape. Denso #1995500-2010 high ohm $130.00 SOLD http://img534.imageshack.us/img534/2384/imag0059c.jpg http://img59.imageshack.us/img59/2711/imag0058fj.jpg 5. (4)-315cc Supra lt. green top injectors in good shape. Denso #23250-70080 high ohm $60.00 http://img59.imageshack.us/img59/5985/imag0061m.jpg http://img62.imageshack.us/img62/6453/imag0062o.jpg 6.HKS Super PowerFlo washable air cleaner in good shape. 3" outlet $60.00 http://img153.imageshack.us/img153/5919/im000527.jpg http://img695.imageshack.us/img695/3606/im000569.jpg 7. Autometer Phantom I narrow band 2 1/16" AFR gauge with rear bracket in great shape. No scratches in lens. $40.00 http://img690.imageshack.us/img690/8758/imag0053d.jpg 8. Miata 1.6L ignitor in great shape. $40.00 http://img375.imageshack.us/img375/6118/imag0054n.jpg 9.TD04-15G home made weld flange. Mild steel. $15.00 http://img705.imageshack.us/img705/8827/im000550.jpg That's it for now till I get the other stuff together. If I forgot anything let me know. I'll try to get some better pics for the blurry ones. I must post before my computer locks up... again.:giggle: Thanks guys!!! |
I think i'll take T-kit without FMU, injectors. Is it possible you to give it to company called PolAmer located in Chicago?
|
Originally Posted by majk
(Post 602242)
I think i'll take T-kit without FMU, injectors. Is it possible you to give it to company called PolAmer located in Chicago?
|
how much for the filter shipped to Montreal, Canada?
|
Originally Posted by absRTP
(Post 602304)
how much for the filter shipped to Montreal, Canada?
|
No problem, It's not a rush, something cheap, throught usps ground
|
would you sell the greddy manifold seperate? LMK cash in hand.
|
Originally Posted by bluemiata90
(Post 602561)
would you sell the greddy manifold seperate? LMK cash in hand.
|
Kit Shipped to J6T3N7, Quebec Canada,? (With Filter if ABSRTP Doenst take it)
|
Originally Posted by Tony~
(Post 602573)
Kit Shipped to J6T3N7, Quebec Canada,? (With Filter if ABSRTP Doenst take it)
|
Sale pending on turbo kit and air filter.
|
Majk and absRTP chime in or Tony~ gets the kit and the filter.
|
give it to Tony, he's my friend ;)
|
Will do, thanks for a quick response. Waiting on you, Majk but not for long.
|
Bumped!
|
Hey Lordrigamus, Ill take the Redtop RX7 injectors, if you can post them Melbourne, Australia. I tried to PM you but my post count is too low. Im soo slack. lol
email me at green_comet @ hotmail.com so we can chat about it. Cheers mate. |
Sorry they are pending to another member, just waiting on the payment.
|
Turbo kit is back on the market!!!
|
No worries, if the buyer falls though on the injectors let me know.
|
Bump!
|
bump, still interested in parting with the td04?
|
Not just yet, I'm going to hold out for a little longer and see if I can sell it as a kit.
|
Bumping for lower prices:
turbo kit-$475. Begi RRFPR-$150. Supra 315CCs-$55. HKS filter-$50. Autometer gauge-$35. Ignitor-$35. |
can I have a picture of the outlet of the aire filter, I wanna know if it's a female or male connector at the end of the filter
Plus, you stated it was washable, with foam filter cleaner? or any specific cleaner? Thanks lordrigamus |
Originally Posted by absRTP
(Post 611543)
can I have a picture of the outlet of the aire filter, I wanna know if it's a female or male connector at the end of the filter
Plus, you stated it was washable, with foam filter cleaner? or any specific cleaner? Thanks lordrigamus Send me your postal code again so I can get a shipping total. I prefer not to ship outside the US anymore but since this falls under the tariff limit of $60 CDN gift value, I can ship this item. http://a.imageshack.us/img840/65/imag0112s.jpg |
J7v 8a7
|
bump
|
bumpt
|
I know it has been asked before but are you willing to part out the manifold yet?
|
bumping
|
prices still include shipping, 92081? happen to have the CARB Sticker?
|
Turbo kit and 315cc supra injectors sold
|
Hey thanx again for the turbo can't wait to replace the supercharger and actually get some balls under the hood.
|
You're very welcome. Hope you have lots of fun with it.
Check out the stickies, there's a ton of usefull info in them, especially the Megasquirt ones. |
Necro bump! Ignitor sold. Keeping the flange.
Items left: Begi RRFPR-$150. HKS filter-$50. Autometer gauge-$35.00 All prices include shipping to the lower 48 states. |
hey i want that turbo kit and the other stuff can u call me from 561 306 8806
|
*edit*
nevermind, missed a post. |
Bump.
|
|
Does the $500 kit come with everything needed to run F/I?
|
Originally Posted by Tdadd
(Post 766208)
Does the $500 kit come with everything needed to run F/I?
|
Turbo kit still on market
|
Nope, it has been sold like it says in the post above yours.
All that's left is: Begi RRFPR-$150. HKS filter-$50. Autometer gauge-$35.00 |
Bumping for lower prices.
Begi 2025 $125 Autometer gauge $30 That's all that I have left. Prices include shipping in the CONUS. |
How well does the Begi perform and will the autometer be enough to run a kit reliably without more info?
|
The Begi is great. Never had a problem with it. Fairly adjustable too. The gauge is nice as far as narrow band gauges go. Better to err on the side of caution and be a little rich because it is a narrow band. Ran them on my car at lower boost levels without issue.
|
supra injectors
Hi, can you send these injectors supra 315cc to Australia ? please email me to work out the details maxspring@aapt.net.au Cheers Max
|
They're sold as stated above.
|
Send me a pm or an email to rmcgrody0@saddleback.edu. I'll take the fpr
|
You have mail!
|
Regulator sold.
|
Mods please lock. I would like to consolidate remaining parts in a fresh thread with some new parts to get rid of the clutter. Thanks.
|
| All times are GMT -4. The time now is 12:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands