FS: 1.6L JRSC including JR BTC
 

just like it says. the kit has about 10k miles on, 9k of it driven by the old man who owned it before. the roots in the superchager are in pristine condition (pulled the cover off when i pulled the charger system off about 6 months ago. the sale includes all the bolts and hoses and grommets and clamps, and also what is not in the picture:

JRSC boost timing controller (new they are 400 bucks)
extra superchager outlet pipe for the superchager (polished)
instructions for the kit
a home made o2 clamp and boost switch if you wish to have it (pretty janky but it worked)
lower pulley mount for non-AC and non-PS cars
i can even peel off the carb sticker from my hood too
i did a pretty good job of collecting all the bolts and hoses, i do know you will need a few hoses extended that i had to cut short for the stock vacuum hose setup that can be easily bought at any hardware store
if your running your car no AC, and just use this bracket that i include that held my AC compressor, you will need a smaller belt, but those are pretty cheap. just FYI.

email me or PM me for information

1300 shipped OBO

Attachment 217328

if only i had the money i would be all over this.

thats what selling drugs is for :P

If i had time to sell drugs I wouldnt be driving a miata ;)

Good luck with the sale.

thats a pretty good point. lol. the least you could do is rack up some credit card debt. i mean come on...what kind of a car enthusiast are you.

price change1 1125 shipped, smokin deal, and here is a complete detailed list of the items included!

-cross over pipe
2 rubber connectors
4 hose clamps
-supercharger intake arm (afm side)
2 rubber connectors
4 hose clamps
-AFM compact air filter element
-AFM compact air filter element adapter plate and top plate
-supercharger mounting bracket (for mounting on cylinder head above exhaust manifold)
-Auxilary fuel pressure regulator
vacuum hose to connect in line with intake manifold
2 vampire fittings to connect inline with fuel lines
1 foot fuel line with associated hose clamp
-custom AC bracket (for mounting static tensioner pulley)
-static tensioner pulley
-4 rib supercharger drive belt (used in conjunction with ac bracket and static tensioner in drive formation "d", see instruction manual for details)
3 feet of about 1" rubber hosing (crossover breathing from supercharger to intake manifold)
reversion pressure valve thingie (adds about .5 lb of boost im told)
host is cut in half, but you can get an idea of what you will be needing to complete the installation
-dummy throttle body
tbody gasket (worn but useable if you wish)
lower supercharger mounting support bracket (mounts to block and bottom of supercharger)
-m45 supercharger
pulley on and valves that control something or another
extra intake extractor plate (polished, it goes on top fo the supercharger and connects to crossover pipe)
-boost timing control unit
black box that is the timing unit
adjuster knob that you mount in your cab somewhere
vacuum line that runs from the blackbox to inline vacuum lines in engine, including the t-fitting for vacuum lines
-IACV blockoff plate (for relocation of throttle body to driver side)
-throttle cable relocation bracket
-JRSC instruction manual
-JR BTC instruction manual

i think that about covers it.

and its sold!

Thank you.