FS: APR GTC-200 Uni.Adj. + RainRail Bracket - $650
 

https://www.miataturbo.net/attachmen...ine=1417551405

https://www.miataturbo.net/attachmen...ine=1417551405

https://www.miataturbo.net/attachmen...ine=1417551405

https://www.miataturbo.net/attachmen...ine=1417546309



Going a different route. I bought this off a hard parker TC owner a year + ago. It has never been tracked.

APR GTC-200 CF Adjustable Universal Airfoil
INCLUDED: Simple aluminum angle brackets to bolt the stands to the rain rail at the trunk seam. I installed 5, 1/4-28 rivnuts on each side of the vertical rails, you can do that or bolt and nut.

One small nick on the top otherwise it's pristine.

As for this moment, no pictures, but you should know wtf it looks like!

If you don't, bare with me until later.



I'd like this to be picked up here in the Bay Area CA, but will ship at your expense.



$650.00

Pictures added

nice piece. I'm curious as to what direction you will be going?

I want a bumper/frame mount set up, which I cooould use this since the second set of mounting holes are roughly 30" apart and frame rails are 31" but there are better wings for that. Besides that I am honestly not needing it anytime soon and can use some of the funds for needed parts.

No one needs a new place to eat there man sandwich on?

Any locals have a trade offer?

What r u looking for in trade? Pm me ur number and let's talk

Mostly for sexual favors... Ok in secret

3.9 Torsen +$

I have a torsen allready. Just some ideas, I need a passenger 5pt seat, 1.6 turbo mani, DP, turbo. I need a harness for my aem ems4. Momo mod 31 330/340mm. Racepak sensors.

I do not need any drive train related parts. Unless you have an aluminum drive shaft or brand new 1 piece axles.

I am interested. Do you not have any pictures of it mounted?

What is different about the universal version than the GTC-200 that 949 sells on their website?

No unfortunately not. I did, but I looked in my photobucket and it appears I deleted them or something. Busy month, so I haven't found the time to mount it for a couple pics.car is 45min away).

Here is a shot of the miata specific. As you see it sits right on the edge of the trunk cradled in a base pad. Since the universal wing's stands are roughly 2.25" wider, it sits on the other side of the gap at the edge of the trunk on the quarter panel. The 90* brackets you can see in above pics bolts to the area with the vertical plane hiding under that gap(rain rail) leaving a small space in between the brackets horizontal side to the qrtr panel . No holes in the quarter panel, trunk opens, but you can't really reach in unless you add the 2.5" risers(not included). The universal comes with different base pads which you will receive with what's pictured above.
https://www.miataturbo.net/attachmen...ine=1418770750

I want this, I just can't swing that much at the moment

That's totally fine because I accept 15x9 bbs wheels as a trade!!!:giggle:

If you want to add cash sure I'd be down for that. PM me if you're serious.

Unfortunately I am not serious enough. Good luck!


I am sir E us about selling this though. Will this really need to go on CR??? Don't make me.

I'm interested in a used 200, but why are you asking so much? Universal wings are less then your asking price brand new. PM me and let me know your best price Alex. thanks.

Here is a brand new one for less than $600 with free shipping: APR Adjustable Wings - GTC-200 Series - Moddiction

I was not aware that these were under $700.

I will put the price @

-$600 to locals.
-$600 and you cover shipping to others

Go a head and buy from somewhere else. You won't get pre-measured/cut/drilled brackets to bolt to your rain rails.


I do need to get a picture of it mounted. I'll get on that.

Thanks. Let me know if you change your mind on price. 5 bucks of angle aluminum doesn't add any value really to me. If I can get a brand new wing for less with no chips shipped to my door for less than your asking price it just doesn't make sense though I respect you can ask whatever you want. If you decide you want something in the $4xx bracket let me know. Thanks.

I would be interested in a trade for a : MSpnp,roll bar,t25 manifold/dp, momo wrc/-r

I have a never installed, Braineack built, DIYPNP. It's an early build, I think a v1.1 board with the sequential injection module added.

I'd be using this on a non-Miata application. Can you tell me the distance between the mounting legs/stantions?

Ok thanks for the offer, I will keep that in mind. I can measure it tomorrow. I will provide the distance from bolt hole to bolt hole on the apr legs(on bottom) as well as the inside edge to edge of the legs. The wing has 4 seperate square pads that can bolt to said holes witch provides the legs, say a 2" square base, 2 on both legs. I can measure the inside edges of said pads as well if needed. IIRC the legs should be either 32" center to center, or other location, I belive is 42". That would be center to center. I will confirm tomorrow.

Is the T25 manifold you are looking for need to be for a 1.6 still?

ok I got the measurements from inside edge to edge. Starting at the leading edge, 41.5, rear edge is 42". I was rushed out of the shop and didnt get the pcd of the mouting holes on the legs. But iirc that should be about 42" at the leading side, and 42.5" at the rear. With the pads on, the inside distance drops to 39.5".


Chili - yes 1.6er

Those dimensions are close enough to what I need. Let me know if you're interested in a trade. I took the cover off of the DIYPNP to verify the board and it is the V1.1 build. I had Braineack add the sequential injection module. It also comes with the DIYNP IAT sensor kit that has also never been installed. I live in the Sunnvale/Santa Clara area.

What do you value it at? I'm not sure how much the old v's hold value when there are all of the newer editions. You can text me 925-360-3018

Honestly, I don't know exactly how to value it. I'll reply in this thread so maybe someone can comment on what a fair value is. I paid $630 for it with the sequential injection upgrade. It's brand new but obviously it's also dated. I don't know what new features came with DIYPNP v2.

I'd be willing to add some cash to the deal but not a whole lot. Someone linked a vendor in this thread selling the same wing for $610 brand new with free shipping. Your pre-drilled mounts wouldn't be useful to me because I won't be using the wing on a Miata.

I understand. I had agreed to Mr wob on 500, he ended up getting one locally. 500$ picked up.

If still available, please PM me.

PM'd