|
FS: Complete 1.6 turbo kit, MSPNP, Full SS exhaust, etc
10 Attachment(s)
As stated I'm posting my COMPLETE turbo kit. This includes every single piece you need to make it run and drive with the exception of an oil drain bung for your oil return. I spent $700 on tuning alone on this, it made 241rwhp @ 11lbs on a fairly stock 1.6 long block. Everything has roughly 2k miles.
Details: -Taco Taco cast turbo mani with relief cuts -T3/T4 Air Technologies 50 trim turbo -Mazda Speed 6 IWG with 10lb spring -Stainless Steel 304 Turbo back exhaust. This was very pricey. 2.5" DP (pie-cut) that goes right into 3" the rest of the way with a vibrant muffler -Turbo XS MBC -Rx7 T2 550cc Injectors that were flow tested and cleaned before install -Wells 201 Variable TPS sensor -MSPNP 9093 with cable and all hardware to connect to PC -GM IAT sensor (gromet style) -Aluminum IC piping -Intercooler (can't remember brand or size but can find out) -Synapse BOV -Reinforced Couplers -10AN SS braided return line -4AN SS braided feed line (FlyinMiata adapter included) -Air Filter -All vacuum line needed to properly install kit -Heat shield (lol better than nothing!) The only pics I have on my phone at the moment, but can send more upon request: https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 https://www.miataturbo.net/attachmen...ine=1403539444 Price is $3000 firm plus shipping. PM or email me if you have any further questions, thank you. italiano1390@gmail.com |
Selling as a whole only, will not separate.
|
240+ whp on a 1.6L at 11psi.. did you dyno it at Flyin Miata or something?
|
It was on a dynomite dyno, I can provide dyno sheets/videos if you'd like. It MAY have hit 12lbs now that I think about it.
|
Also to note, the entire exhaust is v-banded as well.
|
Let me know if you're willing to separate, I may have a buyer for the MS stuff.
|
I can also work with the buyer on shipping since I get a discount with FedEx.
|
Bump, lets get this thing sold.
|
Price isn't horrible, however a LARGE number of people won't need both electronics and the turbo kit, and the exhaust all at once. You should have an easier time if you separate...
|
Understandable.
Basically I drive the car 4-5 times a week and really enjoy the turbo setup but want more. I'd like to Kswap it so I want this to go all at once. If someone wants the entire turbo setup without MS then maybe that's a possibility as I have had a few emails already on the MS. Not sure what a fair price without it would be but I know I'd like to get $3k total. |
ttt
|
Bump! :)
|
Hi there!
I just created an account because I picked up a 91 BRGSE MX5 yesterday. My goal is to possibly run a turbo on a fairly stock motor just to give it a bit more power to have fun with (for now). I cant PM you due to lack of post count. Can you PM me or shoot me an email at fastcar94z@hotmail.com so I can ask you a few questions about this? Cheers! :) Derek |
Originally Posted by BRGSEinTX
(Post 1144125)
Hi there!
I just created an account because I picked up a 91 BRGSE MX5 yesterday. My goal is to possibly run a turbo on a fairly stock motor just to give it a bit more power to have fun with (for now). I cant PM you due to lack of post count. Can you PM me or shoot me an email at fastcar94z@hotmail.com so I can ask you a few questions about this? Cheers! :) Derek |
Sold as soon as the $ clears my acct!
Time to be slow(er) for a bit :( |
Did it sell?
|
Yes sir!
:yippee: |
Congrats! That exhaust is a work of art!!!! :)
|
Dam saw it to late but dam that exhaust is a beautiful work of art
|
| All times are GMT -4. The time now is 05:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands