FS: Greddy custom kit
 

I recently took off my Greddy kit to return the car to stock. Prior to removing the kit it worked great and had 10 psi at 3krpms. All fabricating was done by me and all intercooler pipes have a bead on them so they dont blow off.

The intercooler bolts directly to the AC condenser brackets ( a little has to be ground off the tabs but not much) All 2 1/2" piping. The greddy BOV has the single spring mod so only 1 vacuum has to be routed. Has bungs for IAT sensor, and Water Injection nozzle. Comes with all T-Bolts/silicone couplers. Also comes with oil catch can and K & N air filter.

Sold the exhaust. Will come with the stock greddy downpipe.

Jeff ported the wastegate because we were getting boost creep. Doesnt creep anymore. I welded a 2 1/2" pipe on the outlet so the t-bolt can connect to it.

Comes with:
Greddy turbo with oil fittings
Greddy manifold
Greddy downpipe
Votech FMU disk
-4 AN Oil feed line
-10 AN Oil drain line
Both Block fittings for feed and drain.
CX racing intercooler kit with all neccecary Tbolts and couplers.
*has IAT/WI bung tapped
*Real Greddy Type-S BOV (single spring mod done)
*Oil catch can
*K & N oval air filter


Price is $1000 ! Will ship at buyers expense.

Attachment 200797

Attachment 200798

Attachment 200799

Attachment 200800

Attachment 200801

Attachment 200802

Attachment 200803

Attachment 200804

Attachment 200805

Attachment 200806

Attachment 200807

Manifold pictures?

Damn that is a great price. You cant get much better than this for the price folks.

Bump for a good guy that does great work.

Stock greddy manifold with relief cuts. Can take pictures but i figured everyone knew what they looked like.

Let me clarify that this kit is for a 1.6.

willing to seperate intercooler and piping?

How many miles on the turbo? Is there any shaft play or oil leaks? Because I'm definitely interested.

I put about 3k miles on the turbo, PO i believe had around 5k but not positive. Slight shaft play normal for journal bearing. Never had leaking problems.

Id rather sell it as a kit instead of parting it out.

Feel like selling the downpipe/exhaust system?

Bump.

Bump. 1400 firm

ttt.

Fucking awesome deal.

GLWS

If you do part it out I would be happy to take the intercooler kit/air filter off your hands...

Just realized the BOV on the intercooler is a real greddy not a knockoff. Exhaust is pending sale. Will sell all of the above with the original greddy downpipe (rusted/welded) for 1000$ plus shipping.

Nice Deal. GLWS. hopefully u have it in a couple weeks so i can pick it up.

Just sold the exhaust, Will now come with the original greddy downpipe and the votech FMU disk! 1000$

bump

possibly stupid noob question, but, this should be fairly plug and play as far as a 1.6 goes?

Other than an exhaust, this thing is ready to rock? Depending on what taxes look like, i MIGHT be able to squeak this by the wife

Yup, pretty plug and play. Aside from bumping your timing back to 6* and drilling/tapping the oil pan that should be it.