FS: I have too many parts, Not enough room. [Michigan]
 

Hey Guys/Gals,

I'm switching to the NB Chassis for the new season. I have been collecting parts over the years and I would like more room in the garage.

I can ship some of the smaller items but I would prefer local pickup for some of the expensive / bigger items. I will entertain some trades but I prefer $ (I'm looking for a NB donor car). If you don't like the price, make an offer.

I can be contacted directly at 586-630-7464 - Erik

List of things that need to go Updated:

SOLD AGAIN! 949 Racing Coolant system Reroute Hoses, Hose Clamps, Thermostat, billet housing etc. Installed but never used. $225

Complete Spec Miata NA1.8 Engine. On the dyno it made 2hp less than the other engine so it was used as a spare. Engine was fully built by Stewart Engines years ago. $1000

NA1.8 Bottom End - 100k on the engine before it was pulled from a stock car. Rotates freely. I recommend overboring the block by .010" before being used due to the surface rust on the bores. $200

Enkei RPF1 15x7 35mm Offset Wheels - $550 for Wheels only. (9.8lbs; Too light for Spec miata) They are currently mounted with good Hoosier rubber, If you want the wheels with Hoosiers mounted as well $650
2 Tires R7s - P205/50/15 Date code 5014
~5/32 Tread depth 5 HC
2 Tires R6s - P225/45/15 Date code 2614
~4/32 Tread depth 7Hc

SOLD! Xidas Gen 2 - Brand new Gen 2 Xida coilovers with tender spring and billet coaxial mount. 700lb/400lb. They were installed on the car but decided to go another route with the car. $1900

SOLD 949 Engine Mounts - Brand new, installed but never used. $150 Shipped.

SOLDMegasquirt Mspnp2 Ecu-mm9900 Fwrev .3.3.1 manufactured 06/15 Installed on the car, but never used. $600

SOLD Megasquirt DIY MS3 with Never used Megasquirt wiring Harness I bought this years ago, and I can't verify that it works. Its never been powered up, so this needs to be inspected. Included the 10' megasquirt harness that is still in the box. SOLD

Sparco full containment seat. Cloth is in great shape, no rips, tears, or noticeable damage.
Model - Cs 083 03 Manufactured 2013. $500

Toyota/Denso Coil on plug Setup PN-90080-19815 Includes the mounting plate, wiring harness and coils. Everything you need for the setup! $200

SOLD Supermiata Twin disc clutch and Flywheel Brand new twin disc clutch and lightweight flywheel setup with a torque capacity of 550 ft-lbs. Retails for $1000 but I will let it go for $650.

Dibs on the MS3

damn you deezums. if he dont, i will buy it!!

I'm still planning on taking that block.
Sorry, been super busy.

You guys are absurdly quick!

Gotta be quick for deals like this!

Thanks again!

Organic or ceramic clutch?.

I wasn't aware of an organic version? - 949 Racing 7.25 Twin Disc Racing Clutch

There used to be. If purchased recently its ceramic.

Purchased less than a year ago, I'm 95% confident its ceramic.

Where in Mitchygan is ya?

Had you listed a month later I would have been all over those XIDAs.

48356. Want me to relist them in March ? :)

Willing to split the tires? If so price on the two R7s?

Goddammit. I'm local, and already considering xidas..

Any package deals available for local pickup?

Sheeeiiit, I commute farther than that daily. Even after ranting elsewhere about parts priced close to new, I'd be on that. Sadly it seems others feel the same way, and I doubt they'll make it that long.

Is life.

I will hold off on splitting for a week; After that I will plan accordingly.

Xidas currently are paypal pending.
What did you have in mind for a package deal?

Interested in that clutch and flywheel. PM sent!

congrats to whoever grabbed the Xida. Just a hair too early for me (Gotta get the taxes done darnit!)

Color and Pictures of the RPF1s please

What color are the Enkeis?

Dammit!! XIDAAAaaaaaassss! :vash:

(I was in a freakin' meeting all day yesterday)

Enkei's are black. If you look closely on two of them, they have some small cosmetic blemishes. Wheels and tires are being kept in the bedroom for maximum woman satisfaction.

https://www.miataturbo.net/attachmen...ine=1455719335


https://www.miataturbo.net/attachmen...ine=1455719335


https://www.miataturbo.net/attachmen...ine=1455719335


https://www.miataturbo.net/attachmen...ine=1455719335

Thread Update - I forgot about the coolant system reroute I had laying around, added to the front page.

Also - First round of shipping is set to leave Michigan by 3:30 Today.

PMing you now about the Coolant reroute.

Updated Prices. Many things shipped! Almost There!

If you still have the wheels in a while, I'll take them. (Still waiting on tax break). I am local too.

Do it! Just don't let Erik talk you out of going to Kettering.

Ha, you will have to change your username if you buy these wheels!

If anyone is thinking about building the 1.8na engine for a turbo build, we can work something out. I work closely with an engine machinist.

Cooling route update - Original buyer payment did not go through, back for sale!

Just PM'd you about the coolant reroute!

Hahaha Well I'm in too deep now. No turning back since this semester is coming to an end shortly. Sorry I missed the Daytona party, watched it on DVR and glad to see Pratt killed it. :bigtu:

Lol. I'll change it to "Goingnowherefastinastraightline" so it still holds true. Not sure the Miataturbo gods will allow a small paragraph as my forum name haha. We'll keep in touch.

....AND the cooling system is bought and paid for.

Somebody make an offer on the Coil on plug setup!

Do you happen to have spare parts? Im looking for hood hinges and a splash cover

Is there any particular reason the MS3 you sold me is a MS2?????

https://www.miataturbo.net/attachmen...ine=1456254970

Thanks. Much appreciated.

Hope you got a refund, that sucks. :/

Spec is a stand up guy, I guess he saw megasquirt 3.0 on the main PCB and thought the whole thing was ms3.

Already got a refund, bummer on my cheap ms3 though.

Yea that was a whoopsie. I honestly thought it was a ms3, I thought the ms2 was much bigger and it wasnt until I got the PM and looked at my sales receipt from 5 years ago.. Then the buttcheeks clenched!

In terms of spare parts I have boxes of spares of mechanical NA1.8 parts that I dont need but nothing cosmetic. I will probably save those for the new owner when I sell the NA Racecar for nickels.

Wheels still for sale? My body is telling me to make a poor financial choice so Id better do something stupid quick before my mind catches up and see's what's going on.

Wheels are still in the living room!

never mind, read the add again ...

If you need a 1.8NA head, I think I have 3 of them sitting on the shelf.

The engine wiuld have been interesting to me if it had a 99-00 head

I missed out on the re-route when the sale didn't go through but maybe you can help me on the COPS? :) PM me a shipped price you'd be happy with.

Spec,

Interested in the wheels, where in michigan are you? I'm nearish to Detroit. Is the price obo or firm?

Sorry Fellas, The wheels and tires just shipped out!

Miataki I will message you in a second.

Added 1.6L Block
Also, Anyone interested in a 0.020" over 1.6l block. My machinist has one that he baked, blasted, magnafluxed for cracks, bored .020" over, honed and decked for sale 400$. PM me if you are interested.

78.5mm Bore:

https://www.miataturbo.net/attachmen...ine=1461009582

Not sure how to edit the first post anymore?

Coil on plug setup has been paid for and shipped.

I still have the 1.8NA bottom end sitting around, along with the Stewart engine, and my god 2 more 1.8NA transmissions have been found. Make offers or Jokes, your choice..

Dude, I totally dropped the ball on that bottom end.
Sorry about that. It got pretty crazy around here for a while.
Sending payment now.

Sent.
I'll pick it up next week after I get back from the conference I'm attending this week.
I work on Monday and Wednesday, but I'm free on the others.

I will be gone April 28th - May 2nd for Blackhawk Majors. Anyday other than those days works for me.

Just got the wheels today
 

Couldn't be happier, they have the claimed blemishes nothing drastic at all, and tires look as Spec claimed, 75% life look as if they we ran twice and put away, lol. P.S if your living room produces this kind of dust you must be one serious car guy.

Just bought a bottom end off Spec in person.
Buy the rest of his shit.
He's a good dude.

Thanks Monk.
I will start entertaining the idea of shipping the spec miata engine. If you are looking for a complete engine with known build quality, this is it!

Also, the 1.6 overbore block can be shipped as well. Please contact me directly about the pistons you are using for your project, I'm sure we can work something out.

Erik