FS: incomplete turbo kit, radiator, torsen, turbo tony compatible exhaust
 

For sale is my almost complete turbo kit for a 1.6 miata based around a nissan t25 from an s13. It needs injectors (I was going to use Acura RDX injectors with xenocron extensions and Scion TC clips, probably good for 200whp for about $200-250 brand new), oil and water lines, hot side intercooler piping, a downpipe, and exhaust to be complete. Here are the parts:

- MSPnP with communication wiring and air temperature sensor
$old

- Innovate LC1 wideband (lightly used to setup basemap)
$old

- Flyin Miata exhaust manifold
$150+shipping

- Nissan t25 turbo (it's super clean and has very little play) and I'll include the stock s13 water/oil lines so you can do your own custom solution.
$50+ shipping

- Gt28 wastegate
$15+ shipping

- Manual boost controller (Ace Hardware setup)
$5 + shipping

- Greddy type RS BOV
$100 + shipping

- Small FMIC or v-mount intercooler (11 x 12 x 3) with topside inlet/outlet. I will include my mounting bracket and coldside piping with the Greddy BOV flange and IAT sensor bung for an over-the-radiator FMIC setup. The radiator needs to be lowered and/or tipped backwards. I can also include my radiator mounting brackets if so inclined.
$150+shipping



There is also a Mishimoto radiator that did REALLY well on my car and kept it cool on track in 110+ degree weather out on track without shrouding, but my car was NA at the time. I figure with shrouding, it will work well with a turbocharged setup. It has some fin damage from fans and debris. I will include two universal fans that need to be wired in and you need to create a mounting solution.

Asking $125 + shipping (Pending)



I also have an early Torsen diff with 99 1-piece axles and an almost brand new driveshaft (less than 1000 miles). I think it's a 4.3, but I'll check.

$Sold



Exhaust for a 1.6 with a Greddy setup equiped with a Turbo Tony Downpipe. It has a magnaflow muffler and 2.5" piping all the way. It's one piece now, but I can cut it down and put flanges on it for easier shipping/installation. I don't have the downpipe anymore.

$old



All prices are best offer. I'll upload pictures later today/tonight.


Located in Albuquerque, NM 87104.

Intrested in the lc1 and if you have a iat ill take that to

location?

Location added, brake upgrade added.

I'm not looking to separate the LC1 as of yet, but if the other pieces of the kit get called for, then proughj, you have first call on it.

When the time comes i'm interested in the mspnp and the lc1.

pic of intercooler?

Pics of the parts will be up when I get home from work.

New prices! Need this stuff gone so I can go onto bigger and better ... well at least bigger things =P

Sorry for the lack of pictures, I'm coming back into town today.

New prices, breaking apart the turbo kit. Any reasonable offer won't be ignored!

Very interested in LC1.

pm sent

Pics of the Turbo, Manifold and Exhaust Line?

Might be interested for all that.

Thanks.

I'll give you $75 shipped to 98686 for that turbo. I'd PM you but I don't have the post count. Lemme know.

tony: pm me your email and I'll send you pictures. What is an exhaust line?

mrryanbaker: shoot me an email to phoy(dot)stjohn(at)gmail.com and we can work that out if tony doesn't want the whole deal.

interested in the t25 wastegate. more details/pics plz. thanks!

E-mailed you. Let me know!

Will the mishimoto fit n nb?

Oil feed / return? If so how much shipped to 60586

You guys know you revived a 10 month old thread...

Sorry I'm retard didn't look at the date