terry pham

We are currently tearing down Tony's miata, so we have parts up for sale. We are NOT PARTING OUT the car, we are rebuilding it, next phase!

---------------------------------------

94-95 Turbo "Kit"

NA8 Intercooler setup:
2.5" piping on both cold side and hot side
Cold side has pipe for IAC
Cold side has bung for IAT
Comes with all silicons and t-bolt clamps
Designed for HKS manifold with t25/28
^no AC/PS

Blitz Blow Off Valve
-New Venturi Drive

Intercooler
^Core 21.5" x 9.5"
^^Overall 28" x 9.5"

Turbo 3" downpipe
-custom 2piece
--v-band setup
-no divorce

Turbo 3" exhaust setup
-fully custom
--two resonators
---quiet large muffler
--electronic exhaust cutout

Only parts needed to complete the turbo setup of how it was originally on tony's car are:
--t25/t28 turbo
--HKS manifold

Original cost of parts:
Aluminum Intercooler Pipes: $350
Intercooler: $100
BOV: $200
Downpipe: $300
Exhaust piping: $150
Resonators: $150
Muffler: $60
Electronic Cutout: $150
Total: $1460

Price: $700

----------------------------------------

5spd transmission
Still bolted to engine
Will pull when bought

$200

----------------------------------------

6spd transmission
-was going into the car after rebuild
--change of plans
---unsure of condition, but should be good
--Came off JDM 99-00

$700

----------------------------------------

Torsen rear-end Type 2
-2002 SE
--4.3 gear
---Complete with axles and driveshaft
--off the drift-car, heavily used

$600

----------------------------------------

Torsen Type 2
-Came off same 99-00 as the 6-speed
-complete with axles and driveshaft
-was our backup set (can be used to swap for another miata)

$650

----------------------------------------

na8 motor
-off Tony's car
--Ran GREAT
---Never any problems
--Timing belt/water pump 8k
-140k, 50k boosted
--ACT Clutch and Flywheel
---6 puck sprung Heavy Duty
---Prolite 10.4lb
---^8k with 2 drift events
--NGK Power Cable set
-oil pan tapped for turbo

$600

----------------------------------------

MSPNP for 94-95 NA8
-off Tony's car

$550

550CC Red-top Injectors

$150

Both: $600

----------------------------------------

OEM Hood with pins
-Rustoleum paint

$75

----------------------------------------

OEM Fenders
-rolled and pulled
--to fit 16x8 et0 w/ 205-40-16
-Rustoleum paint
--includes fender markers

$150 for both

----------------------------------------


9998 by terry pham, on Flickr


_A225782 by terry pham, on Flickr

----------------------------------------

Pictures of all parts at:
http://www.flickr.com/photos/terrypham/

----------------------------------------

If you want more than one part, we can make a deal.





.

tempdisj

What gear ratio is the torsen that originally went with the 6 speed? 3.91:1?

rharris19

iTrader: (41)

3.9 with all 6-speeds except Mazdaspeed which was a 4.1

khyber

Tried PMing, can't due to posts, if you could email me at khyber6o3 at gmail.com that would be great, I'm interested in a few of your parts, and very local! Just drove out to work near Agoura from Northridge this morning! :P. Shoot me an email and I can give you my number to make things easier if that works. Thanks

-Max

xjdesertfox

I'm local, pm'ed you on cr on the motor.

xjdesertfox

I'm local, pm'ed you on cr on the motor.

NoiseRacing

Mileage/Condition of injectors? do they need cleaning or a rebuild? Willing to ship to the great white north?

kenzo42

iTrader: (6)

Whos Tony? Should we know who he is?

terry pham

Just sold the motor/flywheel/clutch setup.

Mileage unknown on injectors. Condition - good, just pulled off motor TODAY... other than that, they were used on the car for over a year.

You don't have to know anyone

jerryscherry

bump

terry pham

ttt - lets get this stuff sold.