FS: RC Engineering 550cc Low Impedance Injectors
 

I have 4 RC Engineering PL9-0550 Injectors that were used only briefly previously on a car that had a turbo installed but the guy couldn't get the car running. I got a good deal on them but I was duped into thinking they were plug and play and decided that I dont want to deal with installing a resistor box. They are currently out to be cleaned and flow tested by DeastchWerks. I can ship with the test results when they are back. . If I get no bites they are going on eBay or craigslist.

$280 shipped OBO. Located near chicago.

Bumparino. I just got the Injectors back from Deatschwerks. Thet flow tested great! They measured, at 43.5psi, a flow of 600cc/min, 50 cc/min more than the model rating. 50 free cubic centimeters of flow per minute! Will consider ANY offer! I also have UNUSED Denso pigtails that I'll give you a screaming deal on, still in wrapper, if you buy the injectors.

I'll try to post pics tonight.

Will your tuning solution not handle low impedance injectors?

DIYPNP can only handle two peak and hold injectors, not four so I'd need a resistor pack. I'm too lazy for that.

Oh weird. Ok, just thought i'd ask before you potentially wasted some time. GLWS!

Bump. This would be a great option for someone with a Hydra and didn't order new injectors with it.

you can just solder single inline resistors from radio shack to each injector, it's pretty easy

X2 on that

Interested, send me your offer by PM, I don't have enought post to PM you and I don't want to start posting for nothing.

Thanks !

Forgot to mention I don't need the harness and I can't reply directly to your PM...

Sent you a PM with my email address. Contact me via email please.

Anyone? How about $250 shipped?