FS: STRI Gauges, NA Suspension, Springs, RB Midpipe, Injectors
 

STRI DSD-SLM II Oil Press. Meter 52mm - Amber Model - SOLD
STRI DSD-SLM II Oil Temp. Meter 52mm - Amber Model - SOLD
Sender wiring was cut once to splice in an extension to reach my oil filter adapter plate. You'll need to splice it back together, or add wiring to reach your mounting location.

1994 NA Strut/Spring/Mount Assemblies (2 front, 2 rear) - $100
Each corner has the Strut, Spring, Mount, Bumpstop and Boot combination. I can also seperate these if necessary. I don't know specifics on age or mileage since they came on the car when I purchased it (sorry!!!). It wasn't until after I replaced them that I realized they were actually in decent condition. (130k miles on chassis, unknown on this set)

1994 NA Factory Front Sway Bar with Endlinks - $25

Four (4) Coil Springs with the following specifications: - $50
Wire diameter: .485 in.
Coil Diameter (center to center): 2.995 in.
Number of coils (free/active): 6.5 / 4.5
Spring length: 7.3 in.
Calculated spring rate: 465 lb/in

K&N Cone Filter - replaced by smaller K&N filter for supercharger. freshly oiled - $15

Racing Beat Sport Connecting Pipe (unresonated) - $75 + shipping

Exhaust Manifold Gasket - $10

305cc Supra Injectors (green top - 2 available) rebuilt (new gaskets) & flow-matched - SOLD

A-Pillar Gauge Pod 90-97 - Holds 2 gauges - Same as http://www.good-win-racing.com/Mazda...t/40-1070.html - $50 shipped

Paypal to confirmed addresses.

UPDATED LIST & PRICING!

1994 Miata Ecu BPE8 - $150

Moss Motors PowerCard Pro Series Fuel & Timing Controllers - $300 for both
From Moss MP62 supercharge kit for '94-'95. Both in great working condition and include wiring extensions.

MAF Sensor works perfectly out of my 1994 - $65

NB Intake manifold with VICS actuator, gaskets, hardware, misc vacuum tubes - $100

NB throttle body (no TPS) - $100

UPDATED LIST & PRICING! All prices OBO

1994 NA Strut/Spring/Mount Assemblies (2 front, 2 rear) - $100

1994 NA Factory Front Sway Bar with Endlinks - $25

Four (4) Coil Springs with the following specifications: - $50
Wire diameter: .485 in.
Coil Diameter (center to center): 2.995 in.
Number of coils (free/active): 6.5 / 4.5
Spring length: 7.3 in.
Calculated spring rate: 465 lb/in

K&N Cone Filter - freshly oiled - $15

Racing Beat Sport Connecting Pipe (unresonated) - $75 + shipping

Exhaust Manifold Gasket - $10

A-Pillar Gauge Pod 90-97 - Holds 2 gauges - Same as http://www.good-win-racing.com/Mazda...t/40-1070.html - $50 shipped[/QUOTE]

still have the gauge pod?

Got any more info on the K&N, inlet diameter, length, outer diameter, etc. model number and I can get size specs. Pic if available.