FS: turbo manifold, wheel adapters, clutch, hazard switch
 

$150- JGS DIY manifold- has a T3 flange
Attachment 213117

$160- 4x100 to 4x108 spacers, 1" thick. brand new, I removed one to take a picture, the other two are still in the box.
http://i50.photobucket.com/albums/f3...x/IMG_0692.jpg

$60- flyin miata replacement clutch with a brand new TOB. Clutch is used, but still has plenty of life left.
http://i50.photobucket.com/albums/f3...x/IMG_0694.jpg

$10- pop up light/hazard switches and the 2 bobble vents, they work fine

bump, obo, as always

manifold is sold. :)

PM sent on spacers.

replied.

Payment sent on spacers :)

Parts arrived yesterday :)
Exactly as shown in the pic, thanks man !

no worries :)

I just tried fitting one of them and found that the bolts do not line up with a set of 17" Mazda alloys. The holes DO line up with the hub, but not the bolts, their off by about 1/4" :(
Are you sure these spacers are for a miata ?

What year is your car? I bolted 2 of them on my 1990 with a set of 16x10 Epsilons. I never drove the car as they were too wide with the adapters to fit...plus my car is still a project

Also, you DO realize these were 4x100 to 4x108 adapters correct?

I've a set of 15s on the car right now, I'll take one of them off tomorrow and give it a try. The car is a 91.

and are those wheels 4x108???

Another thought, if they are off by 1/4" from the new studs on the adapters then the bolt pattern on those wheels is prob 4x114.3....