|
FS : VA - 1.6 + 1.8 + Various Turbo Parts Garage Sale
9 Attachment(s)
Trying to clean storage unit out so I can switch into smaller unit. I want all this crap gone ASAP. Located in Springfield, VA.
1.6 parts have around 95k and 1.8 parts have around 55k on them. Braided Oil feed line - SOLD 1.8 Brake Booster - 25 + shipping 1.8 Starter - 30 + shipping 1.8 cruise control assembly - 20 + shipping Attachment 188772 Turbo Catback exhaust with Cat welded in. Used in my 1.6 for a little less than 10k miles - 150 + shipping Attachment 188773 38mm External wastegate w/ mounting flange - 50 + shipping Passenger side turn signal assembly - 15 + shipping 1.8 Power steering pump - 20 + shipping 1.6 Fuel pump - 10 + shipping Brake master cylinder - 20 + shipping Wiper motor - 15 + shipping Coolant reservoir - 15 + shipping 1.8 coil and wires (look brand new and never tested were on a wrecked miata w/ 55k I bought 9 months ago) prefer to sell locally so they can be tested prior - 25 + shipping Attachment 188774 1.6 flywheel and flywheel bolts - 40 + shipping Attachment 188775 Universal Coolant reservoir - 10 + shipping Prosport Oil pressure gauge - green/white - 20 + shipping BNIB Thermo hose sleeves - SOLD Internal wastegate actuators from WRX td04 turbos - 10 each + shipping Clutch Master cylinder (55k from a 95) - SOLD Intake Filter - 10 + shipping Attachment 188776 Center consoles - 20 each + shipping Attachment 188777 99 Intake manifold with hoses, throttle body, egr block off plates, etc. - 100 + shipping Variable Throttle position sensor (VTPS) - from a 95 ford v8, mounting plate included which lines up with a 1.6's tps mounting holes. - 30 + shipping Attachment 188778 Front Lower Control Arms - 20 each + shipping Attachment 188779 OE Jack - 10 + shipping Evap Canister - 10 + shipping OE Jack - 10 + shipping Rear Lower Control arms - 20 each + shipping Attachment 188780 |
1. I can't tell much from the pictures, so could you please elaborate on the braided oil line for $10. I'm looking for one that will go from the oil feed location on the 90-95 blocks and will attach to my T25 turbo. It's tough to tell, but it looks like one end is a 90* to -4an? and the other end has male threads of some sort.
2. What are the thermo-sleeves sized for? Are they sized for the turbo oil/water lines or are they larger in diameter? |
what kind of external wastegate is it?
|
Originally Posted by jasonrobo02
(Post 729937)
1. I can't tell much from the pictures, so could you please elaborate on the braided oil line for $10. I'm looking for one that will go from the oil feed location on the 90-95 blocks and will attach to my T25 turbo. It's tough to tell, but it looks like one end is a 90* to -4an? and the other end has male threads of some sort.
2. What are the thermo-sleeves sized for? Are they sized for the turbo oil/water lines or are they larger in diameter? The thermosleeves would fit hoses up to 3/4in. I should double check though... probably should have done this prior to posting, sorry. :facepalm:
Originally Posted by bogaut
(Post 729969)
what kind of external wastegate is it?
|
Is the cruise stuff all there my R doesn't have it at all
|
Thanks for the update.
|
what muffler was used with the exhaust? also what size is the piping?
|
Originally Posted by atli126
(Post 730155)
Is the cruise stuff all there my R doesn't have it at all
Originally Posted by Milky
(Post 730669)
what muffler was used with the exhaust? also what size is the piping?
|
I'm looking to get the whole cruise setup with wiring and all
|
bump
|
| All times are GMT -4. The time now is 11:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands