Fully built 1.8L Engine BP4W - Manley, Wiseco, Supertech, more
Time to move on. Selling my fully built engine with no expense spared.
Price: $3900 (Has over $2700 in parts and over 100 hours in port and polish work, machining and assembly) Located in Azusa, CA. Local pick up only for first month. Will consider shipping in March Fully built 1.8L Engine -5k miles -Compression: 185, 185, 190, 190 -Forged Internals block, fully built head with port and polish -Comes with Port matched Intake manifold -10AN oil drain bung and 1/8 NPT temp sensor welded in oil pan -Comes with free engine stand. BP4W head - $1085 in parts -Supertech heavy double valve springs, 74 lbs titanium retainers, SPF-SPRKMM18D ($415) -Supertech Intake Valves, 34mm (+1mm) MAVIN-1206 ($142) -Supertech exhaust Valves, 29mm (+1mm) MAVIN-1206 ($148) -4 angle valve job ($240) -New oem valve guides and valve seals ($160) -Port and polished head -Port matched intake manifold to match head (max based on gasket opening) -head decked Block - $1430 in parts -Wiseco forged pistons 8.6 CR, 84.5 mm with Wiesco rings ($475) -Manley Forged H-beam Rods ($360) -Ground and polished crank ($160) -ACL Race bearing set, mains, rods and thrust ($120) -OEM Cylinder head gasket - $65 -Melling oil pump ($115) -ARP Head studs ($135) -Block honed for new pistons -block decked Misc - $200+ in parts -gates timing belt and tensioners -Misc seals and gaskets -water pump (cast impeller) -Wrinkle coated valve cover -Port matched intake manifold included. https://cimg0.ibsrv.net/gimg/www.mia...d356068991.jpg https://cimg7.ibsrv.net/gimg/www.mia...7a896c68af.jpg https://cimg2.ibsrv.net/gimg/www.mia...a782129b35.jpg https://cimg3.ibsrv.net/gimg/www.mia...4d610e3ebc.jpg https://cimg9.ibsrv.net/gimg/www.mia...52c561ae88.jpg https://cimg2.ibsrv.net/gimg/www.mia...038578ae47.jpg https://cimg4.ibsrv.net/gimg/www.mia...0c79000e4a.jpg https://cimg5.ibsrv.net/gimg/www.mia...5dc8554d1b.png https://cimg1.ibsrv.net/gimg/www.mia...50594dfd84.jpg https://cimg2.ibsrv.net/gimg/www.mia...746224f048.jpg https://cimg3.ibsrv.net/gimg/www.mia...252e205d68.jpg https://cimg4.ibsrv.net/gimg/www.mia...738b177607.jpg https://cimg5.ibsrv.net/gimg/www.mia...ab5819de38.jpg https://cimg6.ibsrv.net/gimg/www.mia...88b58052ab.jpg |
Looks like 8.6:1 CR.
|
The dyno you posted is NA I take it? I kinda want the head... pity it doesn't have VVT. I've wasted too much time with that to go back to the NB1 head haha.
This is a solid price for anyone that's contemplating getting head work done. |
Add squaretop, make one fidddy.
you can’t build this for $4200. |
Originally Posted by DNMakinson
(Post 1520592)
Looks like 8.6:1 CR.
|
Originally Posted by Stealth97
(Post 1520635)
Add squaretop, make one fidddy.
you can’t build this for $4200. |
bump
|
still available
|
bump
|
bumpidty
|
bump
|
Engine for sale
Hey man I have a 99 nb and just blew it up in feburary I've been following your post and no action on sellers so what's the best deal you can let it go for money talks and I'm very interested very nice build did everything right so let me know thank you tj
|
Originally Posted by V8killernc
(Post 1533420)
Hey man I have a 99 nb and just blew it up in feburary I've been following your post and no action on sellers so what's the best deal you can let it go for money talks and I'm very interested very nice build did everything right so let me know thank you tj
What's the most you'll pay? Inquiries like this are aids... |
Originally Posted by Arca_ex
(Post 1533461)
Inquiries like this are aids... |
Wow love the friendly vibes here I was asking the sellers cyotani lowest number and see if we could work something out yall have nothing to do with it just vultures on a post I'm looking for a steal of a deal might be this if not I'll keep looking until I find one no worries it's been for sale 4 months 2750 what he has in the parts I still have to ship it to nc so theres my shot
|
"What's the lowest you'll go" is up there on the dumbest questions I get when I sell stuff. Why would I effectively bid against myself?
|
We aren't friendly to idiots.
|
Originally Posted by V8killernc
(Post 1533553)
Wow love the friendly vibes here I was asking the sellers cyotani lowest number and see if we could work something out yall have nothing to do with it just vultures on a post I'm looking for a steal of a deal might be this if not I'll keep looking until I find one no worries it's been for sale 4 months 2750 what he has in the parts I still have to ship it to nc so theres my shot
|
|
Would you take two corn dogs and a bag of chips and a drink of your choice delivered personally by myself.
Disclaimer: Food may be cold or eaten |
I don't know OP so maybe I'm missing something here, but I assume he is a non-professional weekend warrior wrench like most on this site .. so what do you guys generally value DIY labor at ? I thought the offer itself was / is solid given its gotten no action for 4 months .. although V8killer should have just PMd the offer instead of posting up "whats your best price" and kept this discussion private between him and OP instead. Cost of parts new for used parts assembled + buyer pays shipping seems fair to me. I remember seeing a TSE built block sold for cost of parts here before.
|
I miss this forum...
yes, PM me to discuss offers. The engine was not rebuilt by a professional but I work at an automotive engineering shop that does do professional rebuilds so I have access to all the right tools had a professional engine rebuilder teach me everything I needed to know for the rebuild. The value of that info is whatever you want to make of it. |
So three corn dogs?
|
Would you sell and ship without the head.
|
sup nuggs im jes gon ass wut yall gon give me all yer shiz fer you ship cuz ain no mofo gots time fo dat playaz gots ta runs no wa i meenz gots hos 2 skoo and shiz ta doo feel me bish
|
Originally Posted by sixshooter
(Post 1533870)
sup nuggs im jes gon ass wut yall gon give me all yer shiz fer you ship cuz ain no mofo gots time fo dat playaz gots ta runs no wa i meenz gots hos 2 skoo and shiz ta doo feel me bish
|
Originally Posted by EC_15
(Post 1533851)
Would you sell and ship without the head.
I might be interested in the head if this guy wants the bottom end. Would need it shipped also. |
Originally Posted by sixshooter
(Post 1533870)
sup nuggs im jes gon ass wut yall gon give me all yer shiz fer you ship cuz ain no mofo gots time fo dat playaz gots ta runs no wa i meenz gots hos 2 skoo and shiz ta doo feel me bish
|
Originally Posted by ridethecliche
(Post 1534001)
How many drinks did it take you to channel into that?
|
Originally Posted by skylinecalvin
(Post 1533557)
"What's the lowest you'll go" is up there on the dumbest questions I get when I sell stuff. Why would I effectively bid against myself?
"What's your final price?" "What's the lowest you'll go?" "Will you take[Listed price *0.333] shipped?" "Why are you selling this; what's wrong with it?" "Will you trade for seat covers and a turn signal?" "I'm definitely interested, let me get back to you tomorrow................" I don't even bother to respond. If I'm spiteful, I'll wait till after it's sold to send them a message "no longer available" Either way, not to further pollute cyotani's thread, but patience pays. The right buyer knows what this is worth in time and dollars and will appreciate the easy button solution with the documentation shown. |
Price reduced to $3900
|
Originally Posted by cyotani
(Post 1542577)
Price reduced to $3900
|
Originally Posted by Kmb355
(Post 1579752)
super old thread but is it still available?
|
I tried nobody replied.
|
Originally Posted by cyotani
(Post 1533845)
I miss this forum...
yes, PM me to discuss offers. The engine was not rebuilt by a professional but I work at an automotive engineering shop that does do professional rebuilds so I have access to all the right tools had a professional engine rebuilder teach me everything I needed to know for the rebuild. The value of that info is whatever you want to make of it. |
Hmm, let's bump a thread that's more than a year old with no response to the previous newb messages. Are none of you are smart enough to check when he was last online? :dunno:
"Last Activity: 07-30-2019 09:55 AM" :fawk: Maybe Admin should lock this thread or ban? |
All times are GMT -4. The time now is 10:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands