Garret T28 (2560) turbo, NEW ARTech manifold + downpipe, CXRacing intercooler kit,etc
21 Attachment(s)
Hi All,
Got a bunch of parts for sale. Had been collecting them but decided to go another route. -Garret T28 ball bearing turbo (2560) serial number 14411-69F00, 466541-1. Spins freely, no damaged blades. Minimal shaft play (moves a hair when push/pulled). Has a divider wall welded on the exhaust side (similar to the s15 spec R) by a shop (clean welds, good penetration). Also has a fairly new Garrett adjustable actuator (7-11 psi) installed which is $91.50 on bell engineering's website. Will come with brand new oil feed line as well as a new oil drain fitting with barb end (not pictured). Water lines not included (sold already). SOLD -New ARTech T25/T28 turbo manifold (fits 1.6) and ARTech seperated gas downpipe. Custom made, beefy, stainless steel, work of art. Need I say more? $850 shipped -New CXRacing intercooler kit with piping, blow off valve, etc. SOLD -Megasquirt 1 (with harness wired up to run parallel with stock ECU) PCB2.2, MSV30. I bought this used a year or two ago locally. I was told it works and it was meant for the 1.6 (90-93) but I cannot confirm this nor guarantee this as I have not run this in my car (I don't have IAT hooked up, VTPS, etc). I do not have a cable too hook it up to the computer either db9 to USB). It will also come with a megastim and a few 9 volt batteries so you can test the functions. SOLD Extras I have for sale: -OEM strut bar (came off a 99 miata). Fits NA's as well (1990-1998). SOLD -OEM steering wheel with air bag (off my 92). $10 obo -Manual boost controller $10 obo -Billet Aluminum blow off valve (used). Looks very well built, comes with attachment to either vent-to-atmosphere or recirculate. Has built in check valve which can be removed.I have the flange but it is welded on a pipe that was used on a Volvo S70 (I can cut off the section where the flange is before I ship it out or sent it out whole). $40 obo -Four 3rd Gen Eclipse vents (louver type). Fits perfectly into NB's, requires some modification (shaving) for the NA eyeball vents. Great upgrade and/or replace sagging eyeball vents. You can close off vents not in use. 1 of them isfixed with a dab of JB weld where it attaches (you can't see it really). $25 obo (they sell for $10 each on ebay) Located in the bay area (California). Can also take additional pictures if needed. Email me at solomon.h.young@gmail.com for a quicker response. |
I'm interested in the manifold and dp. Pm me
|
Originally Posted by old school
(Post 1146783)
I'm interested in the manifold and dp. Pm me
Also forgot to mention the CXRacing intercooler kit clears A/C and power steering. |
I'm interested in the water lines and fittings. Price shipped to 92691?
|
interested in the whole ic set. price shipped to 94080?
|
cant PM due to limited posts... if you'll do $60 shipped for strut bar ill take it! Or PM me your best price, thanks!
|
PM's sent.
Pending sale on intercooler and water fittings. Will be separating the kit. PM/email for offers. |
CXRacing Intercooler kit and turbo water line/fittings sold!
|
Finally, the correct price on a MS1.
Might wanna list the year it was wired/built for. I also highly want your turbo. |
Originally Posted by curly
(Post 1147710)
Finally, the correct price on a MS1.
Might wanna list the year it was wired/built for. I also highly want your turbo. Turbo is still for sale. If you don't need the oil feed and drain fitting I'll reduce the price a little bit. Thanks for commenting on the MS1. I'll update the original post but to clarify it's for the 1.6 (90-93). |
1 Attachment(s)
|
compatibility 1.8 nb2 01'?
|
Originally Posted by terrorik
(Post 1149549)
compatibility 1.8 nb2 01'?
Updates: Turbo is SOLD. MS1 is SOLD. Both manifold and downpipe are still available (new, unused). Had a few questions regarding the diameter of the DP. It's 2.5" and has an oxygen bung already welded on it in case you couldn't see in the picture. |
im mike who picked up the ms...nice to meet you today and thanks for the ride and info! glws on your other stuff!
|
Originally Posted by trd-hachi-roku
(Post 1149609)
im mike who picked up the ms...nice to meet you today and thanks for the ride and info! glws on your other stuff!
Update: Strut bar sold. Main item left is the ARTech manifold and downpipe...any takers? |
Willing to sell dp separately?
|
Originally Posted by SilverBlitz
(Post 1149799)
Willing to sell dp separately?
|
All times are GMT -4. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands