Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Miata parts for sale/trade (https://www.miataturbo.net/miata-parts-sale-trade-5/)
-   -   Goodwin BBK v2 (minus calipers) front + rear, $750 (https://www.miataturbo.net/miata-parts-sale-trade-5/goodwin-bbk-v2-minus-calipers-front-rear-%24750-83714/)

codrus 03-29-2015 06:44 PM

Goodwin BBK v2 (minus calipers) front + rear, $750
 
So I recently upgraded my Goodwin v2 front + rear kit to TSE 11.75s, selling off the old parts. $750 plus actual shipping from 95130 (rotors are heavy).

Includes:

http://www.codrus.com/forsale/brakes/gw-forsale1.jpg

- 1 pair of Wilwood 11" front rotors on Goodwin hats in good condition, just came off my car. On right side of the photo.

- 1 pair of Wilwood 11" front rotors on Goodwin hats that are not in good condition -- these were my track rotors. They might be salvageable, might not. I can leave the rotors mounted, or dismount off the hats and discard to save shipping weight. This is the pair at the top of the photo.

- 1 pair of Willwod rear rotors (I think they're 10.75", but not sure). These were mounted on the hats that currently have the track fronts on them. Once mounted, they're interchangeable with 01+ Sport rears, but lighter due to the aluminum hat. This is the pair in the center.

- 1 pair of 01+ Sport rear takeoffs. I got these to keep as spares, but don't need them. This is the pair on the left, can include or not as desired.

- 1 pair of Goodwin front brackets. Aluminum brackets with heli-coil inserts for the threads. The bracket bolts to the front upright, then the Wilwood Dynalite caliper bolts to it. 4 bolts for attaching caliper to bracket, factory bolts are reused to attach the bracket to the car.

- 1 pair of Goodwin rear brackets. Similar to the fronts, except handed left/right and used with stock calipers instead of Wilwoods, so it retains the factory parking brake. Same story on the bolts. Works with both 1.6 and 1.8 (non-sport) rear calipers.

- Goodwin instructions (not pictured).

In particular, it's missing the front calipers and the lines, because I kept them for my TSE kit. Calipers are $125 each at Summit, lines are available from any of the standard set of vendors. New fasteners for the rear hats might be desirable -- I will include the bolts I took off, but I'm paranoid and don't like to use them more than once.

Fronts:

http://www.codrus.com/forsale/brakes/gw-forsale3.jpg
http://www.codrus.com/forsale/brakes/gw-forsale4.jpg

Rears:
http://www.codrus.com/forsale/brakes/gw-forsale7.jpg
http://www.codrus.com/forsale/brakes/gw-forsale6.jpg
http://www.codrus.com/forsale/brakes/gw-forsale5.jpg

--Ian

codrus 07-14-2015 12:50 AM

Bump, price reduced, will part out.

Part out prices:

Front brackets: $125 for the pair
Rear brackets: $125 for the pair
2x hats w/ good condition front rotors: $175 for the pair
2x hats w/ bad condition front rotors (or I'll throw the rotors away if preferred): $125 for the pair
Other stuff: make offer.

--Ian

codrus 08-21-2015 12:01 AM

Rear brackets are sold.

--Ian

codrus 03-14-2016 11:33 PM

Bump, front brackets and rotors are still available, as are the spare rotor hats.

--Ian

codrus 03-21-2016 09:27 PM

Front brackets and spare rotors hats are sold. Just the good front rotors left now.

--Ian


All times are GMT -4. The time now is 04:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands