Feeler: MSM turbo setup w/upgrades, complete
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
Feeler: MSM turbo setup w/upgrades, complete
*EDIT* new tentative prices are up. Pieces are still on car, as there was a massive blizzard in Billings and I've been delayed, so one-two weeks out. Expect install on the 27th.
Hey peoples.
I'm switching to an FMII on my Mazda-speed Miata (msm, if you didn't know that term, eh.)
So, I'll have a bunch of stockcrap stuff you want for sale, along with the mods. This setup can make between 200-240whp without methanol, I've seen a few of our guys do better with methanol and other craziness (such as leatherface).
Basically, consists of :
Flyin Miata Bloush Upgraded OEM Turbo WITH oem exhaust manifold, oem exhaust outlet (uses a 19t mitsu compressor wheel I believe) ((FM DOESN'T offer this anymore. Maybe 20 were made, a few blew up, but instantly. mine has a few miles on it)) $775 + shipping obo
Flyin Miata downpipe, MSM specific $275 +shipping OBO
Flyin Miata complete intake kit. Replaces the inlet pipe, parts of the outlet, throttle body inlet, GFB blow-off valve. Home made MBC. $400+ shipping OBO
OEM MSM Catback exhaust $150+shipping OBO
OEM intercooler piping/intercooler $100+shipping OBO
RX-7 460cc injectors (red tops) $75 obo + shipping
You'll need to tweak a few things, such as the TBI pipe is made for the MSM intake air temp sender. You will want a better IC. People use $80 ebay units, fits into the stock piping. The exhaust has a dumb dip in it that would be nice to get rid of.. You'll want an OEM MSM water outlet, or you can modify the outlet piping, fairly easily.
Buy it all for $1400 and add a cheap ebay IC, managment and make over 200hp without effort.
Thanks,
Nick
Hey peoples.
I'm switching to an FMII on my Mazda-speed Miata (msm, if you didn't know that term, eh.)
So, I'll have a bunch of stock
Basically, consists of :
Flyin Miata Bloush Upgraded OEM Turbo WITH oem exhaust manifold, oem exhaust outlet (uses a 19t mitsu compressor wheel I believe) ((FM DOESN'T offer this anymore. Maybe 20 were made, a few blew up, but instantly. mine has a few miles on it)) $775 + shipping obo
Flyin Miata downpipe, MSM specific $275 +shipping OBO
Flyin Miata complete intake kit. Replaces the inlet pipe, parts of the outlet, throttle body inlet, GFB blow-off valve. Home made MBC. $400+ shipping OBO
OEM MSM Catback exhaust $150+shipping OBO
OEM intercooler piping/intercooler $100+shipping OBO
RX-7 460cc injectors (red tops) $75 obo + shipping
You'll need to tweak a few things, such as the TBI pipe is made for the MSM intake air temp sender. You will want a better IC. People use $80 ebay units, fits into the stock piping. The exhaust has a dumb dip in it that would be nice to get rid of.. You'll want an OEM MSM water outlet, or you can modify the outlet piping, fairly easily.
Buy it all for $1400 and add a cheap ebay IC, managment and make over 200hp without effort.
Thanks,
Nick
Last edited by chance91; 11-20-2010 at 07:53 PM.
#4
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
Ugh. Good to know there is interest. Bad news, guess who's out of town again all week? With only a phone?! This guy. Serious like 8 days home the last month and a half.
Im installing this weekend so yep, it'll be out then. Sota wanna ditch it all at once. Might do an ebay auction. Or part it to forum members. That's about it for now im dead tired.
Im installing this weekend so yep, it'll be out then. Sota wanna ditch it all at once. Might do an ebay auction. Or part it to forum members. That's about it for now im dead tired.
#8
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
No prices yet because its currently in the car, and I work 60hrs or better a week out of town and haven't researched what its worth... **********.
I pretty much have no internet till saturday peeps, so ill make an effort to get prices and qutes out then
I do want to keep it together in Parts like mani+turbo+outlet, ic plumbing, fm pieces or exhaust, etc. Or I get stuck with weird parts I don't need.
I pretty much have no internet till saturday peeps, so ill make an effort to get prices and qutes out then
I do want to keep it together in Parts like mani+turbo+outlet, ic plumbing, fm pieces or exhaust, etc. Or I get stuck with weird parts I don't need.
#14
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
Ill get pics. Up soon but they are on the car for now. Im on vacation but I got some from my photobucket. Chance901 on photobucket, main album.
Il be home after thanksgiving day to add them
Il be home after thanksgiving day to add them
#19
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: Fargo, ND
Posts: 533
Total Cats: 3
Some pics n ****
that's a prefilter on there made from walmart pillow material but its the kn underneath. Keeps it quieter and acts like a prefilter, extends cleaning interval.
FmII downpipe, 2.5in. 225$
Rx7 redtop injectors, make an offer.
Sorry for the time it took to get pics up. Rough couple of weeks at work and my laptops wifi isn't working. Least the phone can handle it.
Getting things ready to ship for this saturday, so make offers im not much of a turbo setup collector..@
that's a prefilter on there made from walmart pillow material but its the kn underneath. Keeps it quieter and acts like a prefilter, extends cleaning interval.
FmII downpipe, 2.5in. 225$
Rx7 redtop injectors, make an offer.
Sorry for the time it took to get pics up. Rough couple of weeks at work and my laptops wifi isn't working. Least the phone can handle it.
Getting things ready to ship for this saturday, so make offers im not much of a turbo setup collector..@