ITBs, Engines, Wheels, Racing Beat, Springs, High Flow Cat, Injectors, Diff, OEM, etc
7 Attachment(s)
I'm probably going to end up divorced if you all don't help me out with this. Here's what I have for sale. All parts are located in Louisville, KY. Prices do not include shipping or Paypal. Please take that into account when you make an offer.
Things I'm looking for if you want to offer a trade: Front/rear aero 11:1 compression 83.5mm pistons 15" wheels in 8 or 9" width with non-ridiculous offset (read: functional) Unused race tires Carbotech XP8 or XP10 front brake pads for 1.6L Recaro seats Mariner trunk ITBs for 1.6L - SOLD Includes billet Techno Toy Tuning ITB adapter, 4 AE101 throttle bodies, a working Toyota variable TPS sensor with plug and pigtail, 4 Techno Toy silver billet aluminum velocity stacks, modified 1.6L fuel rail with rail adapter (no FPR), dyno tune for Haltech PS1000, 4-wire IACV and Haltech IACV block with ports. This is a well-sorted setup that HAS been on a car and has seen a track day and driving around town. Everything is here to make the car run properly on ITBs. 13 x 7.5" Lenso VPDs in Silver +25 offset - $500 This is a set of 4 wheels, which you can usually not find. They're silver in color and are free of major defects. Very good used condition. 1.6L Racing Beat Header - $325 This is a very nice header with exceptional flow. At one point it was cracked in a couple places but I paid to have it professionally repaired. Stronger than before. Has seen hours of on-track abuse and a 100+ run dyno session with no issues. Currently none of these in stock in the country to my knowledge. Eibach Springs 550 lb/in 2.5" ID Pair - SOLD Rubbed a little bit on the inside, but still 100% functional. Summit Racing 7" Springs 350lb/in 2.5" ID Pair - SOLD Fantastic condition and show very little wear. 265cc Purple 01-05 Miata Injectors - $50 per set I have two sets of these. Price is per set. One came from a friend. The others came from an 86k mile engine. Work great to add E85 to a 1.6. Kinetic Sunbelt 1.6L Spec Miata Race Engine - $600 About 5-6 seasons old as best I can tell. Was in a friend's SM and I bought it off of him and used it for a season and a half. Made 113 whp after a race in his car without accessories. Made 105 whp in my car with accessories. Made 123 whp with ITBs and E85. All Dynojet numbers. Very strong for a 1.6. I should note that I believe the cams may be slightly scarred because it leaks some oil from around the cam seals under hard driving. Fresh TB. Would make a good starter SM engine if you replace the cams. Comes with a tuned AFM. Good 1.6L Long Nose Engine - $250 Has about 120k miles on it. Made 90 whp on a DJ like every other stock 1.6L. Great candidate for a lightweight rebuild or turbo build. Fresh WP, TB, cam seals, tensioner, idler with under 3k miles. Open 1.6L 6" Diff with 4.3 - $150 Mileage was said to be low, but the condition of the housing is very rusty, so I'm not sure what to believe. Either way, it's in good shape internally and does quite well on the race track. No pics available as it's at the shop. Looks like a diff, though. Magnaflow 2.25" High Flow Catalytic Converter - SOLD Real cat, but not 50-state legal, so don't ask me to ship it California. Used for only a couple thousand miles. Very good shape. 1.6L AFM Intake Adapter - $10 From eBay. Buy either engine and I'll give it to you. 01-05 OEM Fuel Rail - $25 Comes with the fuel line to attach to the stock connector. Good shape. 01-05 OEM Flywheel - $30 Some hot spots, but nothing terrible. Could easily be cleaned up with some mild sand paper. Surface rust, but no major problems. Will need a new pilot bearing. 01-05 OEM Injector Harness - $35 Good condition. All plugs in tact. Includes the 3 wire coolant sensor and grounds. 01-05 OEM EGR Valve - $10 Unknown condition. Buy something else and I'll give it to you or give me $10 and take your chances. Came off of my junkyard race engine. Looks fine, but no guarantees. 01-05 OEM A/C Bracket - $15 Put AC back on your NB because you were a dumbass and ripped it off. It's hot out there, bruh. Wheels: Attachment 235210 Attachment 235211 Attachment 235212 Attachment 235213 RB Header: Attachment 235214 Attachment 235215 Attachment 235216 |
17 Attachment(s)
Injectors:
Attachment 235193 1.6L Race Engine: (left) Attachment 235194 Attachment 235195 Attachment 235196 Attachment 235197 Attachment 235198 1.6L Stock Engine: Attachment 235199 Attachment 235200 Attachment 235201 Attachment 235202 Attachment 235203 Attachment 235204 Attachment 235205 Attachment 235206 AFM Intake Adapter: Attachment 235207 NB Fuel Rail: Attachment 235208 Attachment 235209 |
4 Attachment(s)
NB Flywheel:
Attachment 235189 NB Injector Harness: Attachment 235190 NB EGR Valve: Attachment 235191 NB A/C Bracket: Attachment 235192 |
I'm interested in the Magnaflow cat if it fits a 1.6. How much for it shipped to 97383?
|
PM sent to you with a shipped quote.
|
PP sent.
|
Cat sold. Thread updated.
|
Are you selling the 1.8L racing beat header as well? If so, I may be interested.
|
Originally Posted by rharris19
(Post 1171441)
Are you selling the 1.8L racing beat header as well? If so, I may be interested.
|
Offers welcome.
|
Would you do $275 shipped on the stock longblock to 60532?
Also what work was done on the SM engine? |
Originally Posted by ayoustin
(Post 1172086)
Would you do $275 shipped on the stock longblock to 60532?
Also what work was done on the SM engine? The SM engine is decked to the limits of stock specifications and has a lighter weight rotating assembly with matched components. If I knew exact details, I'd be building SM engines. |
I'm in Louisville and I want at least the springs. Call/text 382-6563.
I don't have enough posts to send messages... |
ITBs and springs sold to fellow MT members.
|
Reasonable offers encouraged.
|
Willing to meet a GRM forum member if I can find one passing through on the way to the challenge later this month? I'm interested in the 1.6 long nose motor.
|
Originally Posted by Spinout007
(Post 1174864)
Willing to meet a GRM forum member if I can find one passing through on the way to the challenge later this month? I'm interested in the 1.6 long nose motor.
|
Ok, screen name over there is the same as here. Transport request is out, I've got some emails to send over there.
|
Well that sucks. I don't have the post count to send PM's, been lurking here too long reading. Oh well Screen name @ googles mail will get me, or you can pm me through the GRM board. Transport thread is here.
Grm transport network needed, Lexington, KY to Gainesville: Grassroots Motorsports forum: Grassroots Motorsports |
Interested in the 1.6 RB Headers if you still have them...
|
All times are GMT -4. The time now is 11:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands