BUILT VVT HEAD (never used)
#1
Senior Member
Thread Starter
iTrader: (20)
Join Date: Dec 2008
Location: Austin, TX
Posts: 736
Total Cats: 8
BUILT VVT HEAD (never used)
This head was built by Precision Power
Built VVt Head.
1mm oversized valves $300
Shim under bucket lifters $360
56lb valve springs $360
Titanium retainers and seats
Supertech seals $12
New OEM valve guides $100
Labor was around $800
Original cost of the head was $350
New Misc OE parts $250
Above costs are what I have into it. $2532
I also have a lot of the parts if you were wanting to convert your non VVT 1.8 to a VVT including VVT engine harness. Also, the elbow at the back of the head was taken out so you can install a plug (was for the oil cooler at the filter, but I did away with it). Also has the block off plate for the front water neck for the reroute.
$1650 + shipping
Built VVt Head.
1mm oversized valves $300
Shim under bucket lifters $360
56lb valve springs $360
Titanium retainers and seats
Supertech seals $12
New OEM valve guides $100
Labor was around $800
Original cost of the head was $350
New Misc OE parts $250
Above costs are what I have into it. $2532
I also have a lot of the parts if you were wanting to convert your non VVT 1.8 to a VVT including VVT engine harness. Also, the elbow at the back of the head was taken out so you can install a plug (was for the oil cooler at the filter, but I did away with it). Also has the block off plate for the front water neck for the reroute.
$1650 + shipping
Last edited by yellowihss; 10-17-2013 at 11:20 AM.
#13
Senior Member
Thread Starter
iTrader: (20)
Join Date: Dec 2008
Location: Austin, TX
Posts: 736
Total Cats: 8
Sorry, no paperwork.
The last head I shipped, I built a wood box. I put the head in 2 thick trash bags, and filled all the void space with expanding foam.
Makes it almost impossible to damage.
The last head I shipped, I built a wood box. I put the head in 2 thick trash bags, and filled all the void space with expanding foam.
Makes it almost impossible to damage.
#14
any reason why you didnt have any port work done? seems strange after all that money thrown at it...
#16
two pictures aren't loading for me, so I apologize if they show the answer to my questions. I would be converting to vvt, is everything needed included in this offering? Valve cover, solenoid, oil lines, cams? Pretty interested.
Thank you.
Thank you.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM