Leary about used vortex
 

https://www.miataturbo.net/attachmen...ine=1351355687

Vortech V-9F Supercharger Kit

History: My dad bought it new in February 2008, has a little over 20k miles on it. Operates and builds boost perfectly. Taken off because the car is mine now used as a daily driver, and I prefer to swap over the turbo components from my old 1994.

This kit was sold by gomiata.com as a product of VF Engineering (VF Engineering Supercharger Systems for Audi, BMW, Lamborghini, Porsche, Sypker, VW | VF Engineering | Forced Induction Systems for Audi, BMW, Lamborghini, Spyker, and VW). Gomiata erased the link recently, but it is designed to fit 1999- 2005. Relatively simple design of bolting a centrifugal supercharger to the miata.

The unit is oil cooled. An oil feed line as well as a drain line to oil pan are needed. More detailed information can be found here on vortech's website: Vortech V-9 F Supercharger | Vortech Superchargers

The system is fitted with the 'stage 2' including a smaller pulley and an upgraded bypass valve.

https://www.miataturbo.net/attachmen...ine=1351355687

https://www.miataturbo.net/attachmen...ine=1351355687


If you have interest, please feel free to ask questions.

I took many photos while taking it off the car to aid in the future installation. You can see the entire album here: Vortech deinstallation pictures by 95mx5red - Photobucket

Also took an obscene amount of photos while cleaning it up. Only item not pictured is the pulley that mounts to the crank pulley, as I forgot to remove it. Gallery: Vortech pictures by 95mx5red - Photobucket

$1000 + actual shipping and 3% paypal fee

Will consider trades for hardop.

:party:

I despise every supercharger except for this one. If I wasn't boosted yet, I would actually buy this. This setup would be awesome with a MAF elimination, megasquirt standalone, and a FMIC.

cant go wrong with a vortech! if i had the money i would pick this up and do some compound boost on my festiva!

Do you know what it would take to convert for an NA?

Not a clue.

These are the mounting points. If these do not match up, then I would not look any further. 3&4 are accessed through the oval holes in the water pump pulley.

https://www.miataturbo.net/attachmen...ine=1351365375

Does this come with any type of engine management? I'm actually super pissed I just bought an m45 or this would be mine. GLWS

That depends on how loose a definition of 'any type' you want to use.

VF chipped the stock ECU. It runs fine, doesn't stall with the AC on, runs too rich on tip in and partial throttle, and runs out of injector up top. We sprayed a lot of meth to compensate.

I was not planning on including it.

Notice the miserable afr, and that it did not go to redline.

https://www.miataturbo.net/attachmen...-day-dyno1-pdf

Great looking kit. GLWS!

Let me do some searching to see of this works for an NA...kind of interested.

Pending sale

I knew this would sell quick...
Whoever buys this needs to add a FMIC and run it with a MSPNP and RX-8 425's. That setup would make great reliable power.
Enjoy!

Way to give me seller's remorse first thing in the morning!


Since you do not see this often kit often, I will share more. Here is the bottom pulley. 4 hex bolts. That makes a total of 8 bolts.


https://www.miataturbo.net/attachmen...ine=1351511736
https://www.miataturbo.net/attachmen...ine=1351511736
https://www.miataturbo.net/attachmen...ine=1351511736
https://www.miataturbo.net/attachmen...ine=1351511736

i have some 550 injectors for sale if anyone needs them for this

https://www.miataturbo.net/miata-par...art-out-68161/

It's all mine guys! YAYS

I have 550s in my FD as well but I'm only going to upgrade my secondaries on that. I'll PM you ATLi126

@Thirdgen, I'm thinking MS3 and possibly baller VMount if I can convince a local rockstar to do my welding for cheap. Till I finish collecting parts though, the supercharger will just mock me in my office.

Just stare at it and think of this image to help keep you motivated.

https://www.miataturbo.net/attachmen...ine=1351548364