Full_Tilt's Partout thread
06-29-2010, 02:06 PM
#1
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
Full_Tilt's Partout thread
This is just the stuff Ive had a chance to photograph so far, there will be more to come.
I do all my shipping through UPS, they come to my house every day so Im not going to drive to the post office.
BEGi Mild steel- Separated gas Downpipe 99+ SOLD!
BEGi Cast T25/T28 1.8L exhaust manifold SOLD
Custom Over-the-radiator Front-mount Intercooler setup w/ Forge BOV for 99+ SOLD!
"Shanghai" GT2854 Journal Bearing Turbo + Garret actuator $250 + shipping
This turbo only has a few thousand miles on it, during which it has had a pretty easy life, low boost, and no track days/autocross. No shaft play and not burning any oil. Comes with the original 7 psi actuator in addition to the upgraded Garrett actuator and BEGi adapter, this allows for the turbo to be clocked. The only defect is that there is a bolt sheared off in the exhuast housing, but it has been running that way for a while with no problems.
BEGi non-intercooled charge pipes, Intake, and BOV setup $80 + shipping
Im pretty sure this will work on all years. Mild steel crossover tube with provisions for BOV. Cast aluminum Intake price with provisions for recirculation of BOV. Comes with Bosch BOV, which is pretty quiet and effective and all couplers and hose clamps. Also comes with aluminum bracket for mounting the MAF. I think it is for a 94-97, as I couldnt seem to make it fit on my NB, but Im not really sure. Filter is not included.
BEGi Fuel system 99+ $250 + shipping
Includes BEGi RRFPR (FMU), Bosch 909 inline fuel pump, fuel pressure gauge, brackets and mounts for both FMU and fuel pump, and hoses and fittings. The only thing needed is the adapters that allow the hoses to connect to the OEM fuel hardlines, which can be sourced from BEGi.
Boomslang Patch harness $50 + shipping
This harness was made by boomslang as a plug n' play harness for a piggyback, but I removed the piggyback harness so now it is just a normal straight-through "Patch" harness. Ideal for wiring in a piggyback without destroying the stock harness, or the male end could be cut off and it could be made into a harness for a standalone. Whats important is that it is made out of top quality connectors since it was made by boomslang.
Should work on any vehicle with this type of ECU plug, which includes models from honda, mazda, and many others that Im not aware of.
Braided tubing wrapped Harness for Apexi Neo $20 + shipping
Harness for Apexi Neo (maybe other versions, Im not sure if they use the same plugs), wrapped in abrasion resistant braided nylon tubing and sealed by high-ration shrink wrap. Basically made Chase Bays style for super baller points.
As you can see in the pics, its not the full harness, its not wired up for vtec control, but you shouldnt be using it for that anyway (PM me if you need me to explain why).
I do all my shipping through UPS, they come to my house every day so Im not going to drive to the post office.
BEGi Mild steel- Separated gas Downpipe 99+ SOLD!
BEGi Cast T25/T28 1.8L exhaust manifold SOLD
Custom Over-the-radiator Front-mount Intercooler setup w/ Forge BOV for 99+ SOLD!
"Shanghai" GT2854 Journal Bearing Turbo + Garret actuator $250 + shipping
This turbo only has a few thousand miles on it, during which it has had a pretty easy life, low boost, and no track days/autocross. No shaft play and not burning any oil. Comes with the original 7 psi actuator in addition to the upgraded Garrett actuator and BEGi adapter, this allows for the turbo to be clocked. The only defect is that there is a bolt sheared off in the exhuast housing, but it has been running that way for a while with no problems.
BEGi non-intercooled charge pipes, Intake, and BOV setup $80 + shipping
Im pretty sure this will work on all years. Mild steel crossover tube with provisions for BOV. Cast aluminum Intake price with provisions for recirculation of BOV. Comes with Bosch BOV, which is pretty quiet and effective and all couplers and hose clamps. Also comes with aluminum bracket for mounting the MAF. I think it is for a 94-97, as I couldnt seem to make it fit on my NB, but Im not really sure. Filter is not included.
BEGi Fuel system 99+ $250 + shipping
Includes BEGi RRFPR (FMU), Bosch 909 inline fuel pump, fuel pressure gauge, brackets and mounts for both FMU and fuel pump, and hoses and fittings. The only thing needed is the adapters that allow the hoses to connect to the OEM fuel hardlines, which can be sourced from BEGi.
Boomslang Patch harness $50 + shipping
This harness was made by boomslang as a plug n' play harness for a piggyback, but I removed the piggyback harness so now it is just a normal straight-through "Patch" harness. Ideal for wiring in a piggyback without destroying the stock harness, or the male end could be cut off and it could be made into a harness for a standalone. Whats important is that it is made out of top quality connectors since it was made by boomslang.
Should work on any vehicle with this type of ECU plug, which includes models from honda, mazda, and many others that Im not aware of.
Braided tubing wrapped Harness for Apexi Neo $20 + shipping
Harness for Apexi Neo (maybe other versions, Im not sure if they use the same plugs), wrapped in abrasion resistant braided nylon tubing and sealed by high-ration shrink wrap. Basically made Chase Bays style for super baller points.
As you can see in the pics, its not the full harness, its not wired up for vtec control, but you shouldnt be using it for that anyway (PM me if you need me to explain why).
Last edited by Full_Tilt_Boogie; 07-14-2010 at 01:05 PM.
0
06-29-2010, 06:38 PM
#2
Newb
Join Date: Feb 2007
Posts: 34
Total Cats: 0
Intercooler
Interested plz give me a quote shipping to Hawaii Honolulu 96814
0
07-06-2010, 02:13 AM
#7
Junior Member
Join Date: Sep 2009
Posts: 101
Total Cats: 0
does the patch harness also work on a 01 NBFL?
0
07-06-2010, 02:52 AM
#8
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
It looks like only the 95-00 Miatas used this particular plug, I thought 01+ was the same, but its a different part on boomslangs website.
Im not sure what the difference is, you could take a look at youre ECU and see.
Im not sure what the difference is, you could take a look at youre ECU and see.
Last edited by Full_Tilt_Boogie; 07-06-2010 at 03:04 AM.
0
07-13-2010, 08:34 PM
#10
Newb
Join Date: Jan 2010
Location: San Antonio, TX
Posts: 31
Total Cats: 0
Interested in the downpipe and manifold, can't send PMs yet, please email me at brzez@lyonsandrhodes.com so we can discuss them--thanks
0
07-13-2010, 09:00 PM
#11
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
Interested in the downpipe and manifold, can't send PMs yet, please email me at brzez@lyonsandrhodes.com so we can discuss them--thanks
0
07-13-2010, 10:05 PM
#12
Newb
Join Date: Jan 2010
Location: San Antonio, TX
Posts: 31
Total Cats: 0
Sorry to be a pain in the ***...I didn't get your email. I've checked my Spam inbox, server quarantine area, etc. Nothing. Maybe my address was typed incorrectly? It's brzez@lyonsandrhodes.com. If you typed it right the first time maybe PM me with an email address for you--I can get PMs, just not send them. Thanks-
0
07-13-2010, 10:49 PM
#13
Newb
Join Date: Jan 2010
Location: San Antonio, TX
Posts: 31
Total Cats: 0
Full tilt, I got your PM, fyi, and sent an email to the address you provided. Hopefully you got it...I tried to reply to your PM for the hell of it but it won't let me. If these communications issues persist I'll get my post count up to 15 just trying to get an email through.
0
07-15-2010, 03:57 AM
#15
Junior Member
Join Date: Jun 2010
Location: los angeles/oakland
Posts: 66
Total Cats: 0
how much do you want for the chargepipe and what not shipped to the 91505 thnx
0
08-19-2010, 10:22 AM
#17
Newb
Join Date: Jun 2005
Location: UK
Posts: 14
Total Cats: 0
Is the boomslang patch still avilable and will it fit a '97?
Rich
Rich
0
05-15-2011, 03:05 PM
#19
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
BUMP
I still have the turbo.
I still have the charge pipes but Im missing a few couplers now because some douchebag stole them.
I still have the patch harness.
All prices are negotiable.
I still have the turbo.
I still have the charge pipes but Im missing a few couplers now because some douchebag stole them.
I still have the patch harness.
All prices are negotiable.
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
