Lots of Parts. 11.5:1 Pistons, ITB's,+1 valves, NA and NB stuff. Pic Heavy
16 Attachment(s)
I have some parts for sale that I’ve acquired over the years. They’re taking space in the garage. Some are bad ass, some not so much. Most prices are OBO, some I’ll be pretty firm on. Buyer pays actual shipping. No dibs, first money in my paypal gets it. My paypal is my screen name at Gmail.com.
My pm box gets full pretty quick. For faster response email me at my screen name at Gmail. Super tech 85.5mm (2.0L) 11.5.1 CR pistons. Installed, never ran. $449 + ship and taxes at 949. I’ll take $400. Sold https://www.miataturbo.net/attachmen...ine=1335851429 Ignore the box, they’re actually 11.5:1 https://www.miataturbo.net/attachmen...ine=1335851429 https://www.miataturbo.net/attachmen...ine=1335851429 https://www.miataturbo.net/attachmen...ine=1335851429 Maruha 85.5mm Metal head gasket $225 + ship and tax at Maruhamotorspors. I’ll take $125. If you buy it with the pistons (you’ll need it, unless you have one already) I’ll do both for $450. sold https://www.miataturbo.net/attachmen...ine=1335851429 https://www.miataturbo.net/attachmen...ine=1335851429 Supertech +1 Valves, Retainers, and Springs. I do not have the valve locks, they will need to be sourced from supertech. At 949 valves are $270+ tax ship. Springs are $314 + tax ship. Retainers are $209 + tax ship. Thats $ 793. I’ll take $400. Sold https://www.miataturbo.net/attachmen...ine=1335851429 https://www.miataturbo.net/attachmen...ine=1335851429 |
19 Attachment(s)
ITB’s. Not a complete kit. Manifold from BMG race. TB’s are Mikuni, off a Japanese sport bike, not sure what brand. If I remember right, I think they came off a 650 Suzuki. Just a wild ass guess though. $450 for the set.
https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 1.6 diff. Complete with housing, axles, stubs, and drive shaft. All were working great, without issues when removed for Torsen install. Diff $75, Stub shafts $25 each, axles $50 each. Drive shaft $50. https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 Turbo Stock RB20DET t3 flanged (t28) turbo. Excellent condition. Bought from Splitime 3 years ago last month. Been sitting on my shelf ever since. It’s a bit of a hybrid, to quote Braineack “I would fit on a BEGi T3 manifold. You would have to send it to BEGi to make sure it would fit the Downpipe. In any case the'yd make it work, but that housing has a T3 footprint but a T25 outlet. More than likely journal. Water cooled. Assuming it's a 60 trim, which it looks like, 275-300rwhp max. Basically a journal bearing GT2560”. It comes with the top part of its DP so with a little fab skill it should work well. $120 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 https://www.miataturbo.net/attachmen...ine=1335851485 |
10 Attachment(s)
1.6 brakes and rotors, calipers and brackets. If I remember right, one of the sliding stud thing ( name escapes me) is stuck. $25 SOLD
https://www.miataturbo.net/attachmen...ine=1335851548 https://www.miataturbo.net/attachmen...ine=1335851548 Derlin Motor Mounts $65 sold https://www.miataturbo.net/attachmen...ine=1335851548 Motor Mounts. The ones with “N” on it. $30 https://www.miataturbo.net/attachmen...ine=1335851548 Injectors 4 Mazda RX8 420cc - Yellow Body #195500-4450 $75 SOLD https://www.miataturbo.net/attachmen...ine=1335851548 https://www.miataturbo.net/attachmen...ine=1335851548 Injectors 4 01-06 Mazda Miata 240cc - Thin Lt. Prple #195500-4060 unk condition $50 https://www.miataturbo.net/attachmen...ine=1335851548 https://www.miataturbo.net/attachmen...ine=1335851548 Injectors 2 99-00 Mazda Miata 240cc - Thin Red Body #195500-4430 unk condition $25
Originally Posted by skou
(Post 872195)
Those are actually RX8 injectors rated at 225 cc/min at 3 bar.
Fuel rail, 2001 $40 See above 94 cross over tube. $50 https://www.miataturbo.net/attachmen...ine=1335851548 |
11 Attachment(s)
Sparco 4 point Harness $70 SOLD
https://www.miataturbo.net/attachmen...ine=1335851588 https://www.miataturbo.net/attachmen...ine=1335851588 https://www.miataturbo.net/attachmen...ine=1335851588 ITM Timing Belt $40 Sold https://www.miataturbo.net/attachmen...ine=1335851588 OEM Head gasket $40 Sold https://www.miataturbo.net/attachmen...ine=1335851588 https://www.miataturbo.net/attachmen...ine=1335851588 1990 1.6 ECU $30 https://www.miataturbo.net/attachmen...ine=1335851588 1.6 CAS $25 Sold https://www.miataturbo.net/attachmen...ine=1335851588 1.6 Coil $25 Sold https://www.miataturbo.net/attachmen...ine=1335851588 8? AN Stainless lines I forget the length, probably about 4’ $40 Sold https://www.miataturbo.net/attachmen...ine=1335851588 Big black A/C box that goes under the dash. $30 https://www.miataturbo.net/attachmen...ine=1335851588 More to be added later. |
Do you have better photos of the compressor side of the turbo? Is it genuine Garrett? Do you have any specs of the compressor wheel/ inlet and outlet flange diameters?
|
Originally Posted by dstn2bdoa
(Post 872187)
Injectors 2 99-00 Mazda Miata 240cc - Thin Red Body #195500-4430 unk condition $25
|
ball bearing t28?
|
Originally Posted by skou
(Post 872195)
Those are actually RX8 injectors rated at 225 cc/min at 3 bar.
|
Originally Posted by thirdgen
(Post 872189)
Do you have better photos of the compressor side of the turbo? Is it genuine Garrett? Do you have any specs of the compressor wheel/ inlet and outlet flange diameters?
|
Do the ITB's and mani bolt up or do they need some sort of coupler and are they included .
|
Mmmm... Familiar parts!
|
Very interested in the Sparco harness, PM me if its not sold and ill paypal money asap. Thanks man
|
just bought intake valves last week..... fffff
|
6 Attachment(s)
Originally Posted by thirdgen
(Post 872189)
Do you have better photos of the compressor side of the turbo? Is it genuine Garrett? Do you have any specs of the compressor wheel/ inlet and outlet flange diameters?
A link to the original FS add. https://www.miataturbo.net/miata-parts-sale-trade-5/rb20det-t3-turbo-32838/ Here is some pix of the compressor side. https://www.miataturbo.net/attachmen...ine=1336024061 https://www.miataturbo.net/attachmen...ine=1336024061 https://www.miataturbo.net/attachmen...ine=1336024061 |
3 Attachment(s)
Originally Posted by Venice
(Post 872558)
Do the ITB's and mani bolt up or do they need some sort of coupler and are they included .
Here are some pix of the two surfaces matted up and some of the diameters. https://www.miataturbo.net/attachmen...ine=1336024454 https://www.miataturbo.net/attachmen...ine=1336024454 https://www.miataturbo.net/attachmen...ine=1336024454 |
Yellow injectors, and harness shipped today. Tracking #'s emailed. 1.6 brakes didn't go out, I didn't have the right box. They're boxed up now though, and will go out first thing in the morning with tracking # to follow.
I have a interested party for the pistons, HG, and derlin mounts. I'll give him a couple of days to clear funds, so sale pending...I hope. |
1.6 brakes shipped.
|
Any idea on what the model # is for the pistons? I'm curious if they'll work in a VVT motor.
|
iirc supertech springs come with ti retainers for 314. so its more like 270+314=584 still good price on them though.
|
Originally Posted by Ben
(Post 873282)
Any idea on what the model # is for the pistons? I'm curious if they'll work in a VVT motor.
They're pending right now, hopefully they'll go in a VVT motor. I'd like to seem them used to their potential. I was planing on using them in a Trackspeed built VVT motor with a rotrex. The lack of E85 in my area kept me from doing it. |
All times are GMT -4. The time now is 01:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands