Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Miata parts for sale/trade (https://www.miataturbo.net/miata-parts-sale-trade-5/)
-   -   LS D585 Ignition Coil Bracket Kit (Pre-Order) (https://www.miataturbo.net/miata-parts-sale-trade-5/ls-d585-ignition-coil-bracket-kit-pre-order-89127/)

TheBandit 05-24-2016 07:50 PM

LS D585 Ignition Coil Bracket Kit
 
8 Attachment(s)
I've been asked at length to come up with bracketry for the LS D585 coils. After a few prototypes and much consideration, I've come up with a good solution that should work for all 1.8L Miatas.

This kit will be comprised of:
  • (1) Driver Side Bracket
  • (1) Passenger Side Bracket
  • (4) BHCS w/ Nuts and Spacers
Note: Factory valve cover screws are used to fasten the brackets to the valve cover

Special Pre-Order Pricing is set to $65 including shipping until June 5th. Special pricing will only be available if we can gather a minimum of 5 kits on pre-order. The kits will be available for shipment in 2-3 weeks time.

If you would like to bundle in a set of tested D585 coils with your order, I'm happy to do so. Please note I only have a limited quantity of coils available at this time, so it will be a first come first serve situation. :)

Please comment with your interest, and I will get an invoice sent to you.

Screenshots and test fitment of prototypes shown below. :bigtu:

https://www.miataturbo.net/attachmen...ine=1464133828

https://www.miataturbo.net/attachmen...ine=1464133828

https://www.miataturbo.net/attachmen...ine=1464133828

https://www.miataturbo.net/attachmen...ine=1464133828

turbofan 05-24-2016 07:58 PM

So, those work with VVT cars?

Erat 05-24-2016 08:05 PM

Material of construction?

julio 05-24-2016 08:08 PM

I'm in for a set.

TheBandit 05-24-2016 08:08 PM

1 Attachment(s)

Originally Posted by turbofan (Post 1334040)
So, those work with VVT cars?

Yes indeed.
https://www.miataturbo.net/attachmen...ine=1464134916

TheBandit 05-24-2016 08:11 PM


Originally Posted by Erat (Post 1334041)
Material of construction?

304 Stainless :bigtu:

TheBandit 05-24-2016 08:32 PM


Originally Posted by julio (Post 1334042)
I'm in for a set.

Thanks Julio!

We only need four more confirmations to get this going.

1. Julio (Bracket Kit)
2. bahurd (Bracket Kit and Coils)
3. Downmented (Bracket Kit)
4. d k (Bracket Kit and Coils)
5. StealthNB (Bracket Kit)

julio 05-24-2016 09:08 PM

Someone needs to make a plug and play loom and post the Magnecor boot part #'s and wire lengths for the highly unmotivated crowd like me.

bahurd 05-24-2016 09:38 PM

I'm in for a set + coils/factory wiring. Put my name on the list please.

TheBandit 05-24-2016 09:43 PM


Originally Posted by bahurd (Post 1334062)
I'm in for a set + coils/factory wiring. Put my name on the list please.

Thanks bahurd, I'll add you to the list!

TheBandit 05-24-2016 09:45 PM


Originally Posted by julio (Post 1334055)
Someone needs to make a plug and play loom and post the Magnecor boot part #'s and wire lengths for the highly unmotivated crowd like me.

I haven't gotten that far yet, but if someone has the info I'm good with it being posted in here.

Just to confirm, were you in for the bracket only or did you also want a set of coils?

julio 05-25-2016 07:55 AM

Yes, brackets only for Julio please!!! Got a couple sets of the coils a while back that are lounging in the basement with the rest of my build parts.....

Downmented 05-25-2016 08:00 AM

In for a bracket set, already have the coils from you.

Will they come black, if so how are they "blacked" ?

shuiend 05-25-2016 08:01 AM


Originally Posted by TheBandit (Post 1334064)
I haven't gotten that far yet, but if someone has the info I'm good with it being posted in here.

Just to confirm, were you in for the bracket only or did you also want a set of coils?

In Soviet's build thread he has the info on what boots and everything you need to make your own lines.

TheBandit 05-25-2016 08:18 AM


Originally Posted by Downmented (Post 1334117)
In for a bracket set, already have the coils from you.

Will they come black, if so how are they "blacked" ?

Excellent, I'll add you to the list.

The prototype was painted black, as I made it from scraps of mild steel. The production units will come bare stainless, which gives you the ability to run it as-is or coat it to your liking. :)

m2cupcar 05-25-2016 08:20 AM

Does the bracket/coil rest on the cam cover? or is it just cantilevered off the cam cover bolts?

d k 05-25-2016 12:23 PM

Im in

TheBandit 05-25-2016 04:00 PM


Originally Posted by m2cupcar (Post 1334121)
Does the bracket/coil rest on the cam cover? or is it just cantilevered off the cam cover bolts?

The bracket is cantilevered from the valve cover bolts. It does not rest of the top the surface of the cover. :)

TheBandit 05-25-2016 04:01 PM


Originally Posted by d k (Post 1334165)
Im in

Sounds good d k! I'll add you to the list.

StealthNB 05-25-2016 04:21 PM

please add me to the list, how do you deal with the camshaft position sensor in the VVT valve cover?? I don't see it


1. Julio (Bracket Kit)
2. bahurd (Bracket Kit and Coils)
3. Downmented (Bracket Kit)
4. d k (Bracket Kit and Coils)
5. Stealth NB


All times are GMT -4. The time now is 12:30 PM.


© 2019 MH Sub I, LLC dba Internet Brands