|
MegaSquirt 3.0 with PNP ("Boomslang") harness
2 Attachment(s)
I've got a Megasquirt v3 with all the Miata mods done to it, and a harness made out of spare ECU connectors so there's no cutting or splicing necessary except for the fuel pump wire, obviously.
Sorry for the crappy cell phone pic. $425 shipped. You can email my username at gmail if you want so I can respond faster. |
bump
|
ba-bump
|
Ecu harness for what year?
|
looks like 90-93.
|
What is this obvious fuel pump wire thing I'd need to do?
|
The stock fuel pump wiring doesn't interact with the ECU, it uses the AFM. Once idle air is holding the flapper door open ever so slightly, the fuel pump is on. Since you get rid of the AFM with a MS install, you need to give the MS control of the FP by running a wire from the MS to the FP relay under the dash.
A how-to is documented in the useful MS threads section. |
Originally Posted by curly
(Post 919808)
The stock fuel pump wiring doesn't interact with the ECU, it uses the AFM. Once idle air is holding the flapper door open ever so slightly, the fuel pump is on. Since you get rid of the AFM with a MS install, you need to give the MS control of the FP by running a wire from the MS to the FP relay under the dash.
A how-to is documented in the useful MS threads section. |
Humpy bumpy
|
sold
|
| All times are GMT -4. The time now is 08:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands