Miata Parts Blowout! Turbo, Tony DP, misc...
 

I have tons of parts to get rid of. I have pictures of most and can get pictures of the rest upon request. All prices are without shipping or can be picked up in Murfreesboro, TN.

Greddy Turbo Kit for 90-93 Miata - 15-20K miles on kit. Manifold has relief cuts, upgraded hardware with studs and copper nuts from ATP turbo and Nordlock locking washers, high temp silicone couplers, braided stainless oil drain line, Vortech FPR and K&N air filter. The only thing you will need is a -8 AN to NPT adapter to connect to your drain pan. Turbo has been clocked 90 degrees, but can be returned to the manufacturers position upon request - $750.00
http://members.aol.com/sbrian2/sDSC00666.JPG
Upgraded 2.5" downpipe made by TurboTony - 2 piece with flex, 2 O2 bungs and band clamp - $200.00
Upgraded TurboTony 2.5" catalytic converter - will need if using 2.5" downpipe since it will not mate to the OEM cat - $50.00
http://members.aol.com/sbrian2/sDSC00667.JPG
Bowser Greddy turbo heat shield - clearanced for TurboTony downpipe -$35.00
High flow catalytic converter for use with OEM downpipe - $40.00
http://members.aol.com/sbrian2/sDSC00668.JPG
A pillar w/ dual gage pod - 25.00
http://members.aol.com/sbrian2/sDSC00677.JPG
90-93 automatic throttle body w/ variable TPS and ISC valve - Includes wiring pigtail, great if using a standalone ECU - $50.00
94-97 1.8 injectors - a great upgrade when using the base Greddy kit - $35.00
89-91 RX-7 460cc injectors - 3K miles since cleaned and balanced by Witchunter, plug and play high impedance, great for use with standalone ECU - $100.00
94-97 Flywheel - a great upgrade for more holding power with the turbo kit - $35.00
94-97 Clutch pressure plate and disc - needed for use with above flywheel, used but in good shape - $20.00
(2) 90-93 Coil packs - $25.00 each
(2) 90-93 Manual throttle bodies w/ ISC valve - $20.00 each
(2) 90-93 Fuel rails - make your own dual feed - $10.00 each
90-97 Manual antenna base - $10.00
http://members.aol.com/sbrian2/sDSC00669.JPG
90-93 Valve cover - great for painting, powder coating or polishing - $35.00
http://members.aol.com/sbrian2/sDSC00670.JPG
90-93 Intake manifold - great for painting, powder coating or polishing, does not include throttle body - $35.00
http://members.aol.com/sbrian2/sDSC00671.JPG
90-93 Valve cover painted w/ crinkle black - $60.00
90-93 Intake manifold, recently cleaned and bead blasted - $45.00
http://members.aol.com/sbrian2/sbrian2_engine.jpg
90-93 AFM, recently replaced - $50.00
http://members.aol.com/sbrian2/sDSC00672.JPG
90-93 Glovebox w/ key - $10.00
http://members.aol.com/sbrian2/sDSC00673.JPG
90-97 Gas door / trunk lever - $10.00
http://members.aol.com/sbrian2/sDSC00674.JPG
90-97 Right tail light - small crack, hardly noticeable - $20.00
http://members.aol.com/sbrian2/sDSC00675.JPG
90-97 Mesh grill - $20.00 - SOLD
http://members.aol.com/sbrian2/sDSC00676.JPG
90-97 Red rear bumper - minor scratches - $100.00
90-97 Red left front fender - minor scratches - $100.00
90-93 Open differential - $50.00
Pair of 90-93 axles - $35.00
Pair of 94-97 1 piece axles frozen to spindles, some damage to threads from trying to remove - $20.00
90-93 Drive shaft - $25.00
90-97 Left headlight lid - Montego Blue, make your own NACA ducted headlight lid - $15.00
90-93 Injectors - $25.00
90-93 Clutch pressure plate and disc - used but in good shape - $20.00
(2) 90-93 Flywheels - have lightened or resurfaced before you drop your transmission so no waiting -$25.00
Brand new GM 2 BAR map sensor with wiring pigtail - $40.00
90-93 Engine block and head - runs, but was overheated and has low compression on #2 and #3 due to warped valve seats, bottom end is fine -$100.00
90-93 Alternator - $25.00
90-97 Complete A/C system - everything need except relays and dash button to ad A/C to your non A/C miata - $75.00
90-97 Automatic radiator - all steel construction - no plastic tanks to break - $50.00
90-93 Igniter module - does not work, but great for wiring a COP conversion - $5.00

cool, want to give me a total shipped for the 1.6 diff and the a/c system shipped to 30341 commercial please?

I can save you or anyone else shipping to the ATL area since I will be down there at Atlanta Motor Speedway for the goodguys event on the 12th-14th if you are interested.

sbrian2, do you still have the mesh available?

Thanks

Yes, you want?

How much shipped for one 90-93 flywheel to 48237? Thanks.

How much for the "94-97 Flywheel - a great upgrade for more holding power with the turbo kit - $35.00" Shipped to 98683?

Brian, Please bring down the diff and the a/c system then. COD work for you?

can you get me a price shipped for the motor to 33487 please?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

$42 shipped.

$60 shipped.

It is looking like $250-300 but I may not be getting quotes from the best places. If you can get it shipped cheaper, then I will palletize it and have it ready for pickup.

For everyone sending payment, paypal addy is sbrian2@aol.com

Thanks.

interested in the greddy kit, how much is it to ship it to ca91755?

$795 shipped

I was going to possibly re-use it, but it may not work so I'll let it go. Filter, pipe, and heat shield shipped for $80.

EDIT: Paypal info is on the top of page two fellas.

Shipping for auto radiator? 28677, NC

Thanks

I'll have to get the size and weight on this one tonight to get exact shipping, but $25 will probably cover it.

No biggie, not in any rush. Thanks