Miata parts-hardtop 6speeds and more
 

So it is finally time to part with my Miata and a large stash of parts I have collected.
I am going to start with some of the easier parts to get to.
i live in portland,OR
some of these items I am not going to ship unless I have no other choice
Silver factory hard top in good condition few minor scratches in paint seals appear good- 1500. I have the hanging strap somewhere. I can probably throw in some locking plates but I won’t promise it
I have two MSM 6 speeds in good condition. These were bought from other members and have never been in my car so I have not tested them I believe both were believed to have about 50k on them. The both have serial numbers on them and I confirmed they are both from msms. One is a 2004 and one a 2005. 700 each
Hood(titanium silver-was from an msm) 250
shippable items-things like the pistons I am not going to worry about shipping. The wing and clutch I will price out and see how much they will be and we can negotiate.
APR GTC 300 wing purchased from 949racing. Never removed from box. 800
949racing twin plate clutch. This has the original organic clutch discs with less than 500 miles on unit. It came with a lightweight flywheel which is alas still in the car. These were like 1200 when released and i don’t believe 949 still sells them but I think new clutch discs are still available. No idea where to price this say 500.
SOLD Supertech 83.5mm 9.5:1 pistons/wrist pins used good condition. SOLD pending payment
I have a lot of additional stuff vvt head. Brake parts and a lot of other stuff.
you can message me through the board or you can text me at 503 380 7418
i’ll try and get my garage cleaned up a bit so I can get some photos mostly of the hard top if you wish

https://cimg5.ibsrv.net/gimg/www.mia...1a8c8d3910.jpg

https://cimg4.ibsrv.net/gimg/www.mia...fabc6a69d8.jpg

New items
Red MSM turbo valve cover 200
MSM LSD and two extra rear axles from an MSM. This is from a 2005 MSM it is togichi-fuji type but for intents and purposes acts just like a torsen. The axles are a bit large/beefier CVs and have a slightly higher spline count. Standard miata axles won't work with this LSD. Diff was removed from my car and functioned well. You can have the 4:1 ring and pinion gear as well if you want it. 600.
Keep in mind the diff is not mounted in the carrier so it will need to be installed. I have a open diff pumpkin and carrier that I will throw in for 50 bucks if you want. This is fairly heavy and if you add the pumpkin it is much more so. I would really prefer not to ship this but if that is the only way I will be charging shipping for this.