Miata is sold, heres the stuff left over'
Torsen Rear End conversion. Includes the following
~1 piece axles/halfshafts from later model miatas. Stonger acording to the miata gurus than the seperate halfshafts and axles. ~1.8 driveshaft ~1.8 rearend from an NB with an OPEN diff ~Torsen LSD from a 97 I believe with what I was told 30k miles. All this for $700. Shipping extra and expensive. Pickup gets priority. Still have 2 almost complete motors. Just missing valve covers and oil dipsticks(apparently these are in high demand). One has bad rings, the other needs a crank(nose sheered off). $200 each or $300 for both. A set of 255/40R17 falkin azena RT615s with ~50% left in the tread. $200 for the set. Thats bairly over the cost of just one new one! Turbo kit for 1.6. Less than 3k miles on entire thing. Full tubular greddy manifold(JDM gurus say it was discontinued in japan 5-6 years ago, and I have found that it was around 1600 brand new for JUST the manifold), Greddy 16g turbo, starion intercooler with lots of assorted piping, greddy type S bov with flange welded onto piping, HKS external wastegate, and custom dp. Basically, the basics to get it working. It was at full spool on just the wastegate spring(6psi) at 3k rpm without my electronic boost controller holding the wastegate from cracking open. $1500 for the basics. Other turbo usefull stuff. HKS 1st gen electronic boost controller $150 or $100 if you buy kit AEM universal fpr brand new $100 or $50 if you buy kit Cusco Oil Catch Can Brand new $100 or $50 with kit Walburo 255 used same as turbo. $50 or free with kit Aluminum Flywheel and brand new 6 puck clutch. link to clutch I have $350 plus shipping. Flywheel is used and has a bit of rust on the friction surface. Im sure I still have other stuff, so this will be updated when I remember. |
Where are you located? I may be interested in one of the motors.
|
He's out in Cali.
|
a little online stalking pulled up references to anaheim on crubroadster.net
|
I'm interested in the LSD email me ShantTarbinian@gmail.com
|
sorry, thought i had my location on the sidething, but I guess I never got around to putting it in. Yes, anaheim california
|
Oh, way too far to go get a motor. Good luck!
|
updated!
|
if the 97 torsen is still for sale ill take it
|
its still avalable'
|
can you post up some pics please?
|
what would you like pics of?
|
do you still have the basic turbo stuff? just lookin into my options.
|
I still have the turbo stuff, ill get some pictures for you in the morning'
|
Still things left to sell?
|
How much for the open diff and axles shipped to 87112?
|
this thread is very old unlikely he as anything left but worth a shot
|
AEM universal FPR
I am interrested in the FPR.
Do you have any hardware to connect it to the Fuel Rail? Thanks |
OK, kind of rediculous. Thread is 7 months old and OP hasn't logged on in 3 weeks.
If he comes back and wants to update this thread, we'll unlock. But this puppy is toasted for now. |
All times are GMT -4. The time now is 06:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands