Moss MP62, DIYPNP, 550cc injectors, intercooler, small pulley +
 

Selling a Moss MP62. 20k (ish) miles.

Mp62, moss bracket, moss outlet. Split moss plastic intake tube, all vacuum tubes, bolts, brackets, dummy throttle body, IAC block off port etc. NO ENGINE MANAGEMENT SOLD

Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV SOLD

DIYPNP , with sequential injection SOLD

Track dog racing 62.5 mm s/c nose pulley (14-17psi) SOLD

Rx 7 550cc injectors flowed/cleaned in march at injector rehab, within 2.05% ( 554, one was 562) - SOLD

CXracing 11x11x3 top outlet intercooler. (Brand new never installed) SOLD

DDm works radio surround with an MTX-l, AEM digital boost, AEM Digital oil pressure, Kenwood KDC-X995 Bluetooth head unit. Includes remote oil pressure sender kit, sensors required for install. Sold

Ultra shield ralley 17 in ( $200 local only)

Schroth profile ii ASM with 6pt anti sub, press to release street legal cam ( 1 yr old, fia tags still on) $SOLD

Boss frog miata trunk sub (3 months) $150

Flyin miata resonated race pipe -new. SOLD

Hard dog hardcore single diag. (Hard top) bar $300 local only

IOport seat brace drilled once Sold

Flying miata CF headlight naca duct ( primed white) Sold

Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps. Sold

If you buy the mp62, DIYPNP, gauges, radio, intercooler, dual throttle body,intercooler piping, 550cc injectors all together, nose pulley , gone

Pictures when I get home to resize.

If you want all this, with a clean 95' 157k miles, trm 15x7's some tsw 16x8's, steel winter wheels, a moss oil cooler, newish radiator, FM frame rails, a cobalt SS exhaust, no rust, clean title, and a 1inch thick folder of MX records (really.. Like 0 rust even on undercarriage) $7000

I'll add, prices do not include shipping.

Location would be helpful.

C

Good call, south jersey, marlton

A few pictures.

* apparently not working well, more tonight when I'm not at work

DIYPNP + Injectors
 

Sorry for no PM. Not enough posts yet.

I'll take the DIYPNP assuming it the DIYPNPN76-K Kit assembled and likely the Injectors. Give me your price on both + shipped to 45140.

I'll get your PM or you can email me at bhurd@gmail.com

Thanks.

It's the denso 76 pin, assembled and decently tuned for mine, not sure what your set up is, but likely idle and timing tweaks would be it...

What's your wideband?

I'm mostly going to be shipping USPS flat rate ( what fits). , those together woud go in the medium box which is $10( rounded off).

So $430 for both. It's the de

I'll take this shipped to 47201, PM me your paypal with a shipped price good sir

:)

I hadn't intended to part this out, but, the *perfect* house according to my wife ( we did need more space) came on the market.

That being said, if it takes me a little while to respond, bear with me, and I'll ask that you hold your paypal payments until I'm actually ready to ship each part.

Just check in on here to claim it, and I'll send a pm when it's ready to go. I'd like to keep it in the thread, to make sure that there is an order to everything.

I'll also try again to post pictures tonight

Jared,

So much wan't and i'm sooooo close to you..........Ugh so much want and not enough $$$ :-/

OK, I'll take both the DIYPNP and the Injectors. PM or email me your PayPal info so I can get you the money.

First dibs...

DIYPNP + Injectors
 

Paypal sent a couple minutes ago for the DIYPNP + Injectors.

ID: 2EY31970ER0452730

Thanks

Well, what are you looking at? I might need some time on a lift, it's funny, we went opposite directions, got a WRX when the family outgrew the miata :)

In similar tones though, wife found the *perfect* house... Therefore the miata goes.

I'd love to work something out for the harddog, and I could probably use that intercooler lol. My work is in Deptford, maybe 20-30 minutes from Marlton depending on 295 traffic. Yeah you can pick any weekend though and come use it (Our mechanic only works Mon-Fri) ... Hahaha yeah the situation does seem similar. We just bought a little "too much" house, and we couldn't take on two car payments.... same thing though, *perfect* house haha

Jared,

Again, sorry but I can't even reply to your PM until I get to the magic 15 posts.

Please ship it UPS on Monday. For me the postal service doesn't work reliably and if there's a signature involved it means a trip to the local PO because I travel a lot and my wife works. This usually adds 1-3 days.

So, UPS it is thanks.

Brian

I'm interested in the flyin miata cf headlight duct. Can you please give me a shipping quote to 90278. Thanks, Collin

Willing to separate the dual throttle body setup? I really just need the pulley system as I have a second throttle body and BOV.

Amazing prices! Would've purchased the kit you put together for $2600 had I seen it 2 days earlier... I'll send you a PM regarding the other SC parts...

PM's not working for me either till I hit 15 posts... Please PM me with your e-mail or just e-mail me at x96nax@gmail.com

I'm interested in;
*the Moss sc kit,
*Dual throttle body set up, 2nd throttle body, cable, extra cam, BOV.
*Flyin miata resonated race pipe
*Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, clamps
*Track dog racing 62.5 mm s/c nose pulley
*Schroth profile ii ASM with 6pt anti sub, press to release street legal cam

Would you happen to have the CARB EO sticker for the Moss kit?

How much for these shipped to 94109?

Why did you ask me to post in your other thread after I PM'ed you if you were just going to start another thread?

His other thread got locked....

It got locked because he posted this one.

Hmmm :dunno:

Still waiting for a quote......... Getting closer to 15 posts...

Hey guys I just got home from work, give me a few minutes and ill catch put tuba, sorry about that. The other thread was just a mess so I'm trying to start over

finally a receiver that wouldn't look rice in my car. OP what's it called?

It's a Kenwood KDC-X995BT. The x996 and newer look about the same. You can change the color of the button lights, as well as screen.

You've got e-mail!! Dibs on everything I listed

Full payment has been sent for everything I was interested in!

Check your paypal address!

ID #7AA76356AB045161J

Please let me know if you're willing to take the FM butterfly brace off and if the gauges become available. Thanks.

Updated the OP

Double post

Update the post to reflect the sold Cxracing aluminum 2.5 I'm intercooler tubing, blue 3 layer silicone, and clamps please

Paypal sent for the gauge setup, i/o port and FM headlight duct.
Thanks!
(PM box was full, you're a popular guy)

This man is an amazing seller, stuff arrived packaged better than the bubble kid on little giants!

https://www.miataturbo.net/attachmen...ine=1368499819

When it comes time to install, shoot me an email and I can help clear up wiring stuff a bit,

Good luck with the oil sensor relocate :). FYI there is a threaded hole right next to the oil sensor port, ( I was doing I by feel and got the wrong hole the first time :dealwithit: squirted all over the place.

Let me know if we can work a deal for that rollbar!!! I wan't one! lol

"got the wrong hole the first time squirted all over the place."
-lol

that's a very common phrase on a miata forum

If that rollbar is still around I may be interested...

So is this guy dead, or what? Last activity on 5/16, wondering if he still has any of that stuff for sale.

I bought a couple items off him and in his defense know he's pretty busy with stuff lately. I can shoot him an email if you like.

Yeah, sorry still alive, I've got some stuff left, but unless your local and want to come partake in the pulling, I'm going to hold off on selling for a while. Work has had me on the road/ working 14 hour days 6 days a week, when I do get a day off, I'm stuck with infant twins, short version I've got no time to work on the car.

If somebody wants the boss frog sub enclosure, and is willing to pick it up, I'll sell that as its a zero time uninstall.

If you have the rollbar still when you calm down with work I'll take it off your hands. I'm a little broke for the next few weeks.

Does the sub come with the amplifier and associated wiring?

I might be coming up that way this weekend, and may be able to do just that. Would you mind PMing me your email or phone number?

No, but for an extra $50 I'll add and alpine 4/3 channel amp that I was using with the power wires, no RCA's. it's what I was usin to run the whole car, worked pretty well.

Hey, sorry was out on the road and didn't get
Notifications of replies, I'll PM it to you though