MX-3_4evr's TURBO part out
 

Holset HY35W with only 9K miles. When I got it seemed to be sitting outside for a while or something. It didn't spin freely, but now it spins and I have dipped the exhaust housing in evapo-rust. It has little shaft play, but I think that's because it has no oil. The wastegate has been shut and the wastegate bracket on the cold side has been shaved off. I did ceramic coat the exhaust housing with VHT. I'm including the downpipe flange and gasket. $350 shipped.

Attachment 202379

Attachment 202380

Attachment 202381

Attachment 202382

Tial wastegate 38mm $180 shipped.

Attachment 202383

Attachment 202384


B6T rods $150 shipped


Attachment 202385


Attachment 202386



B code VAF from N/A RX-7 $50 shipped

Attachment 202387

How did this turbo go from being almost seized to spinning freely, was it rebuilt?

WD-40:laugh:

I took some carb cleaner and kept spinning it till it was no longer hard to spin. You could always rebuild it for under $50.

Thanks, good luck!

any more information on the injectors? Mileage? Ever cleaned/flow tested?

4 of them bought from it from a guy that says it came from running cars. The other 2 are unknown. You will have 6 that means you would have 2 spares lol

i may take the injectors next paycheck

i hope you have that wastegate by next friday

Sounds good guys :)

Bumps! :)

PM'ed

Injectors sold! New price on the Holset :)

what spring is in the wg?

9lb or 8.5lb I can ask the previous owner :)

B for bump! I want these items gone! :)

Wastegate and VAF sold! OBO on all the prices :)

$300 shipped for the Holset HY35W! $150 shipped for the B6T rods! BUMP! :)