The New Nasty Miata Part Out
 

2003 1.8 vvt Engine $3200 (Oil pan to Valve cover, Intake Mani, Ecu, Wiring Harness, and clutch all there)
http://i8.photobucket.com/albums/a48...tamotor001.jpg
http://i8.photobucket.com/albums/a48...tamotor002.jpg
http://i8.photobucket.com/albums/a48...tamotor003.jpg
the parts in it
Belfab Racing High Performance Engine Kit
·Complete Gasket Set
.Belfab Pro H Beam Rods
·Supertech Forged Pistons 83.5mm Bore 9:1
·Supertech Valve Spring Kit
(Springs, Titanium Retainer, and Seats)
.HP Rods, Mains and Thrust Bearings
Attachment 209841
Attachment 209842
Attachment 209843
Will also have 550cc rx7 injectors with modified fuel rail to add inline fpr and gauge, act clutch, and all the accessories.

Turbo Kit $1000
·Garret t25 $150
·Custom Manifold $250
·FMIC HKS Sequential BOV $300
·Exhuast Elbow & DP $125
·AEM FI/C (tuned for:550cc,t25 10psi)$300
·Autometer Boost Guage $40
http://i8.photobucket.com/albums/a48...tamotor004.jpg
http://i8.photobucket.com/albums/a48...tamotor006.jpg
http://i8.photobucket.com/albums/a48...tamotor008.jpg
http://i8.photobucket.com/albums/a48...tamotor009.jpg
Tranny $500
http://i8.photobucket.com/albums/a48...ey/misc001.jpg
Torsion LSD $500
http://i8.photobucket.com/albums/a48...ey/misc002.jpg

Any questions feel free to ask.
I will post another thread with the interior pieces after I separate them and take pictures.

I don't get it are you mx03tb....and if not then how are you selling like identical stuff.

does the turbo mount turbine flange facing up???

They made an exchange between them :)

Correct. I saw on his post he is selling stuff like it is still his. This is not the case, I have everything Mazda Miata he had. I think he is kinda just trying to help me out with it.

We also have someone that sent a check for $7500 for the whole motor and turbo set-up. I'm giving the check 7 days to clear before I make any official sales of motor parts. I think its a scam though.

I pm'd both of you. him about headlights and you about the fi/c

Yes it mounts flange facing up(bottom mount)

Sent PM. Looking for headlamps and taillamps. Thanks.

I returned all pms.

I have all the parts, but b/c he(Pedro) might have a buyer for the the motor setup, turbo and all I'm at a stand still. Anything I might be able to use on an NA chassis I'm holding on to in case I end up keeping the engine.

For now I'm only willing to sell the headlights, taillights, interior pieces.

If someone is interested in the motor I will be willing to part out everything, just have to sell it first b/c it's kind of where all my eggs are.

Adjusted prices to help get the ball rolling. I've got way too much stuff at my house(junkyard).

Pic of downpipe....

????????????

Uploading them right now actually, but I don't think it will work b/c his entire exhaust setup was custom

http://i8.photobucket.com/albums/a48...ownpipe004.jpg
http://i8.photobucket.com/albums/a48...ownpipe002.jpg
http://i8.photobucket.com/albums/a48...ownpipe003.jpg

Looks like the bottom end is sold, anyone interested in the head?

I want the boost controller, but you have no feedback. lol

Its cool man I can understand that. I was suppose to see money today for the entire turbo kit. I should have some feedback next week, the first of parts sold were shipped today.

I sent you a pm

Ask pedro If he knows Jeff wheeler from Orlando!

Rip clear your pm's how much for the ic without bov?

Sorry guys, cleared some pms

If you sent me a message please send another

FMIC wo/BOV = $200

I pulled the head from the block to take some pictures as requested by someone interested in the bottom end. So assum9ing the bottom end with all the acc. and clutch is sold I will have the head available for sale. Looking for $700 out of it, comes with intake manifold.

Also have someone interested in buying the whole turbo kit and I'm not necessarily holding it for them but don't want to break it up unless I for sure can have at least the FMIC, turbo manifold, AEM, and turbo sold, then I'm willing to part.

Pics of head??
Beside the parts in the head, what work was done?

Head is Sold

Still have a lot of these parts. Adjusted prices for your tax time pleasures. Woops too much time must have elapsed since the original post so here is the major things I have left
1.8 Built Block will come with arp studs, rods, pistos, oilpan(bung for return), water pump, timing belt, alt., ps pump, a/c compressor, and act heavy duty clutch $1400
6 Speed Tranny $450 Have someone very interested
Torsen LSD $450
Turbo Kit $800
Mani $200
FMIC w/BOV $300
AEM FIC $300 Not included but available is the wiring harness already soldered for the AEM 1.8 vvt harness
Fuel Rail modded for FPR $50

how much for rx7 550's

Pedro never gave those to me. Ebay seems like the best place to look for those.

ohh i wish i had cash for that tranny.

Where are you located?

Orlando, FL

I want the tranny and torsen. Hope fully my tax money gets back soon. If I get it in time I will just drive up and snag it.

Cool man let me know I'm trying to find out if I can ship the tranny Greyhound b/c a guy in Texas wants it.

I want the LSD and will pay shipping if you can give me another week

still no feedback, can anyone attest for this guy

If I get my money back soon I will have ABSOLUTELY no problem driving up there and snagging it.

I can't call dibs yet because i'm waiting on my money, but to let you know, I am serious about buying both the tranny and diff.

Yeah that's cool man, I know how that goes. I'm looking to buy a lot of parts to finish building my s13 and will be selling my car hauler and waiting on tax return money to do it, I hate having my eye on parts I want and not having the money to buy them, hopefully money will be in hand tomorrow for the trailer.

I will I had not sold the head off it now, I just helped my buddy pick up his 90 miata and we have welded the diff in it and are cutting the springs and welding them to the strut tower to play around with it, but had I kept the head I would have seriously considered putting the whole drivetrain in it.
http://i8.photobucket.com/albums/a48...atasale005.jpg

damn that looks like fun.

I should be sending you a pm soon about whether or not i'll be driving up and getting those sweet parts. Dont wanna cloud your thread with my drooling and wishing......

I bought the cylinder head from him awhile back. He shipped it when he said he would, gave me the tracking numbers shortly after, packaged it accordingly and it appears to be in good condition (will be going to the machine shop shortly to verify). If he ever gets around to giving me feedback, I will do the same for him once it gets back from the machine shop.

Thanks JayL how do I go about giving you feedback? Remember when you put that on your motor you will need to reset the cam gear and time accordingly.

I bought headlights from him. Was promised way cheaper price by original seller, but oh well shit happens. Leave positive feedback for me and I'll do the same. click on the little #/100% under my user name next to "Feedback" and fill it out.

Fwiw the tranny is gone. I just picked it up

still got the torsen?

I how have a 99 miata and will be keeping any of the parts I have left. Thanks
/thread

Do you still have the AEM FS Ill take it if you do