My NUMBER IS 770-815-5498 Text preferably.

LOCATION: GWINNETT

Time has come to say good bye. I'll sit on whatever doesn't sell. I'm in no rush. Especially the harder to find pieces. EVERYTHING IS STILL IN/ON THE CAR Everything is all over the place in the listing. I will organize later. As well as pictures upon request.

Update (6/12/16) Engine -has 1300 miles since I rebuilt it-
$1000 delivered within an hour range from me. -99head And intake manifold with stock nb header.
-94-95 4pin coilpack
-94-95 alternator.
-94-97 cas -valve cover to oil pan.
-spark plug wires.
-revG coolant reroute
-new sensors
-new head gasket and associated seals
-new water pump and timing belt
-heater core hoses
-upper and lower one piece radiator hoses.
FULLY DRESSED

https://www.miataturbo.net/attachmen...ine=1465780728 https://www.miataturbo.net/attachmen...ine=1465780728

HKS muffler - $350 -included midpipe, NA cat, and test pipe https://www.miataturbo.net/attachmen...ine=1465780728

-fidanza lightweight flywheel (either 8lb or 10lb need to verify) -$250 https://www.miataturbo.net/attachmen...ine=1465780728 https://www.miataturbo.net/attachmen...ine=1465780728 https://www.miataturbo.net/attachmen...ine=1465780728

Center console $200 https://www.miataturbo.net/attachmen...ine=1465780728 https://www.miataturbo.net/attachmen...ine=1465780728 https://www.miataturbo.net/attachmen...ine=1465780728 https://www.miataturbo.net/attachmen...ine=1465780728

Clutch and pressure plate with about 4K -$80 https://www.miataturbo.net/attachmen...ine=1465780728

Universal overfenders $150 https://www.miataturbo.net/attachmen...ine=1465780728

Mazdaspeed strut bar $200 https://www.miataturbo.net/attachmen...ine=1465780728

Mazdaspeed header $400 THIS IS FOR AN NB 99-05 HEAD ONLY! https://www.miataturbo.net/attachmen...ine=1465780728

Tein flex coilovers (one was damaged and will need a new lower mount ) $600

Arc rad cap $50

Arc cooling panel $250

Work side skirts $200 $

Racing beat FRONT bumper (has damage but no chunks are missing) $200

Hood $150 Deck lid $80

Finish panel $80

Rear bumper $80

Maxim work heat shield $80

Lc1 $100

1.8 test pipe $80

Flyin Miata sway bars (front and rear/ no end links) $125

4x Bbs reps, one barrel has a hole $150

Nitto neo gen 205-50-15 x3 +1 with sidewall damage (4 total with 1200 street miles) - $ 200

Tub and suspension components as well as hubs are available. Anything you don't see, just ask

Details on rebuild? Stock components? What machine work? Etc...

Interested in the FM sway bars. PM'd

Does it say any other aftermarket parts listed in the description in reference?

Only rebuilt with OEM parts

All stock. Head is shaved .060 and pressure checked fine. Bottom end is from a 95 and was not touched (didn't burn any oil) and every seal has been replaced. From the head gasket to everything surrounding Any other question. My number is listed and you can contact me.

those tires tho
 

where you located? I'm in jersey

Atlanta.

in need of an injection harness has to be the 96-97 3 pin, do you have one?

I actually might. Shoot me a text please

Mazdaspeed header SOLD

You willing to split up the sway bars?

Not at the moment.

details on the lc1 color/mileage. shoot me a msg

Let me know if you change your mind. I'm interested in the rear. ;)

Can you get the stuff for the Tein flex. I'm very interested in this setup

Bump for a great seller. Buy this man's stuff!

Still have the sway bars and heat shield?