|
parting out CSP miata
03 engine with vvt 48k when installed spring 2011, $1100 your choice of stock 01 intake, stock 99 intake, or a 99 intake with the butterflies removed.
99 5 speed transmission 17k when installed spring 2011 $350 03 super fuji lsd swap with axles and drive shaft energy suspension bushing installed in rear housing SOLD Megasquirt pnp $600 VVTuner $175 purchased together $750. Built by J Mitchell Wheels 15x10 949 6ul's gunmetal only been used for autox's $800 tires are no count! Kosei k1 ts 15x7 with toyo ra1 take offs I got from Long Road Racing $400 Kirkey seats drivers side is a #41500 16 inch wide seat with sliders, passenger side is a #16400 on solid mounts. both have the grey tweed covers $125 each Toyota coil on plugs with harness set up for 90-93 with igniters on pass side fender well SOLD Trunk with csp spoiler $100 Innovative wideband MTX-L $150 Delrin motor mounts(miata roadster) SOLD Fidanza flywheel SOLD 90 dash swap (lighter and to get rid of the pass side air bag) $200 Miata roadster extended/angled short shifter SOLD racing beat front sway bar 1 1/4 for 01-05 SOLD Republic spec miata battery box. one top bracket for stock miata battery and one top bracket for pc680 $65 Griffin aluminum radiator $200 Bilstein PSS9's coilovers with isc top mounts $850 EVERY control arm with energy suspension mounts, isc offset mounts in the front upper control arms $350 ALL 4 spindles with ARP extended studs and new wheels bearings in the rear springs 2012 $350 Prices do not include shipping and are to a point negotiable. |
6 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1366918898
Miata parts by tzdevill77, on Flickr https://www.miataturbo.net/attachmen...ine=1366918898 Miata parts by tzdevill77, on Flickr https://www.miataturbo.net/attachmen...ine=1366918898 Miata parts by tzdevill77, on Flickr https://www.miataturbo.net/attachmen...ine=1366918898 Miata parts by tzdevill77, on Flickr https://www.miataturbo.net/attachmen...ine=1366918898 Miata parts by tzdevill77, on Flickr https://www.miataturbo.net/attachmen...ine=1366918898 Miata parts by tzdevill77, on Flickr |
Suspension?
|
I wonder if the battery box will fit a yellow top Optima D51R, they are now mandatory for Chumpcar (and free :)
|
The COPs can not be used with the stock ecu, correct?
|
the battery box measures 5 1/4 x 7 1/2
Originally Posted by slammed200
(Post 1005384)
I wonder if the battery box will fit a yellow top Optima D51R, they are now mandatory for Chumpcar (and free :)
|
How much shipping on the seats to 72120?
|
added a radiator sold the rear end...
|
Is the megasquirt plug n play for 99 miata? What come w it?
|
Originally Posted by tzdevill
(Post 1006283)
added a radiator sold the rear end...
|
Packaged price for your MTX-L and COP's shipped to 33629? Can't PM yet..
|
it is for an na 90-93.
Originally Posted by antransj
(Post 1006362)
Is the megasquirt plug n play for 99 miata? What come w it?
|
Furry email me tzdevill77@gmail.com
|
|
is the MR short shifter for NB 5 speed?
|
off the MR website it fits 89-05 all 5 speed cars.
MiataRoadster short shifter kits - MiataRoadster - High-performance customer service...and parts for Roadsters |
Shifter sold
|
Suspension and control arms for sale. My wife decided she didn't want them on her car.
|
Originally Posted by tzdevill
(Post 1009420)
Suspension and control arms for sale. My wife decided she didn't want them on her car.
EVERY control arm with energy suspension mounts, isc offset mounts in the front upper control arms $350 |
I would rather not unless someone else speaks up about wanting the rears or the front lowers separate as well.. pmed you.
Originally Posted by slammed200
(Post 1009455)
Would you sell just the front uppers with the ISC offsets in them? Either way, PM me prices shipped to 47201
|
Do you have a rear wing?
|
|
Are the 949 wheels 15x10 all around?
|
yes 15x10 off the very first shipment of them!!!!!
Originally Posted by Sebas
(Post 1009881)
Are the 949 wheels 15x10 all around?
|
price shipped for those koseis to 92868 please
|
Do you have pics of the control arms? Refinished?
I plan on putting ES bushings in in my car, however, 350 bucks to NOT HAVE REPLACE BUSHINGS sounds like a pretty good deal. Shipping might be a killer though. -Zach |
I can get some pictures this weekend. I originally had a second set of control arms and took the bushings out and painted them black then added the bushings and then added the zerk fittings for greasing them. Some of the zerk fittings have fallen out from vibration.
Originally Posted by thasac
(Post 1010502)
Do you have pics of the control arms? Refinished?
I plan on putting ES bushings in in my car, however, 350 bucks to NOT HAVE REPLACE BUSHINGS sounds like a pretty good deal. Shipping might be a killer though. -Zach |
How much for the seats shipped to CT? Not far from NC. Assuming still available.
Better to email, please email me at alpmaster00@yahoo.com |
Seats and Kosei's sold, sorry for some reason the "edit" button is missing off the original post.
Also adding Miata Cage 1/4 spacers black all 4 $75 Miata cage spacers | Flickr - Photo Sharing! Miata cage spacers | Flickr - Photo Sharing! |
How much for dash ship to 64874
|
pmed you msm
|
everything is back for sale. Shifter kart will be picked up the end of this month!!!!
|
03 engine with vvt 48k when installed spring 2011, $1000 your choice of stock 01 intake, stock 99 intake, or a 99 intake with the butterflies removed.
99 5 speed transmission 17k when installed spring 2011 $300 vvtuner, used for 2 years $150 Trunk with csp spoiler $100 Innovative wideband MTX-L $125 90 dash swap (lighter and to get rid of the pass side air bag) $150 Republic spec miata battery box. one top bracket for stock miata battery and one top bracket for pc680 $65 ALL 4 spindles with ARP extended studs and new wheels bearings in the rear springs 2012 $300 Miata cage spacers $65 price adjusted for everything that is left. |
prices adjusted and removed some parts that sold.
|
03 engine with vvt 48k when installed spring 2011, $950 your choice of stock 01 intake, stock 99 intake, or a 99 intake with the butterflies removed.
99 5 speed transmission 17k when installed spring 2011 $250 vvtuner, used for 2 years $125 Innovative wideband MTX-L $125 pc680 $65 ALL 4 spindles with ARP extended studs and new wheels bearings in the rear springs 2012 $250 price adjusted for everything that is left. __________________ |
"ALL 4 spindles with ARP extended studs and new wheels bearings in the rear springs 2012 $250"
Are these OEM Mazda bearings? Approximate mileage? |
They are Mazda bearings. No idea of true mileage, one season of autox and no street miles.
|
I'll take the spacers. Is that $50 shipped? :) 94596
|
75.00 for just the rear spoiler and hardware shipped to 95603?
|
Spacers sold.
Pmed about spoiler |
How much for shipping the trunk lid and spoiler to 43202?
|
spoiler sold sorry
|
do you have car listed on miata.net complete?
|
No sir I do not. Only in pieces.
|
OK thanx similar to another being sold complete that I sent link to a friend.
|
spindles still available?
|
Yes still have the spindles.
|
Trans gone
|
found that I have a VVT valve cover also $50 bare no sensors.
|
Did you ever sell the 10's?
|
YEP both sets of 10's and my wifes set of 9's are gone. Shifter kart wheels don't take up as much room so maybe the wife wont saything!!!!
<<<<<< my name is Jeremy and I have a wheel problem |
Would you take 120 for MTX-L Wideband shipped? 76021
|
I have the 99 Bilstien pss9's on my 1990 and they ride so very nice. Handling is amazing. You need no rear bar and the racing beat 1 1/8 front bar with after market mounts. Well never wear out and is the prettiest set of shocks ever. I recommend these on a street car that gets raced. Good equipment good investment.
|
Would you take $300 for the tranny? No grinds or anything all the synchros are good???
|
I will pay full price for the wideband let me know
|
Sorry guys I was busy all weekend.
Baker, pmed you JDM sorry but the transmission has already been sold. |
spindles and wideband shipping today.
|
Engine is all that is left. $750 picked up. Comes with ebay header and the csp exhaust I had on the car. Also come with all three intake manifolds that I have.
Just want it gone, need to make room for more shifter kart parts. |
| All times are GMT -4. The time now is 03:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands