Parting out two NA's
96 Miata (White)
Big stuff listed here, have lots of smaller items as well. Hood - one scratch about 5" long through paint $100 Passenger front fender $75 both doors $125 ea (doors are power mirror and window-will seperate) Power Mirrors $50 ea Power Window regulator/motor assy $70 tub with rear quarters $300 small dent in wheel arch of driver's rear-2-3" long. Otherwise really clean and rust free. front A-Arms $200/set of four Rear A-Arms $200/set of four Full soft top with frame $125 (black) Trunk lid $50 Rear Bumper $75 Rear finish panel (perfect with badges) $100 1.8L short block 147K (motor had blown head gasket) $250 1.8L head, rebuildable, slight warp from blown gasket $150 1.8L automatic transmission $200 Head, tail, marker lights, lots of interior parts, dash, heat/AC, let me know what you need. All parts are very clean from an unwrecked car. 95 Miata (red) with 26K miles I have purchased this car but do not have it home yet. Should be here in the next couple of weeks. both doors $125 ea Drivers front A-Arms $100/set of two Trunk lid $50 Rear Bumper $75 Rear Finish Panel $100 Rear A-Arms $200/set of four Spindles/hubs $100/pair Steering Rack (PS) with one bent tie rod $75 All prices are OBO Located in Nebraska |
im interested in red trunk lid(if no dents or major scratches) and maybe red drivers fender if you have it...
|
Originally Posted by disturbedfan121
(Post 188600)
im interested in red trunk lid(if no dents or major scratches) and maybe red drivers fender if you have it...
I'll check it over and get pics for you when I pick up the car in a couple of weeks. I think it is fine. No good fenders on this one-hit in the front. |
With your post count of 2 I'd say the mods here might get ya. ;)
You starting a Miata junkyard out there in the plains? |
shoot me some pics and if it looks good ill take the trunk lid
|
Originally Posted by miatanutz
(Post 188620)
With your post count of 2 I'd say the mods here might get ya. ;)
You starting a Miata junkyard out there in the plains? No junkyard. I have bought a couple for parts as I am building a Locost7. I have been reading here as it will be FI after the car is sorted out. Because it is not in a Miata, I can't see buying a dedicated FI kit because of wasting money on manifold/downpipe due to fitting issues, so I have been lurking around here for DIY ideas. |
i need a passenger side mirror, preferably the white one, would this be possible, and if so, how much?
|
Are you looking for a power mirror or manual?
|
Any scratches/dents in the passenger door? If not I'm interested in buying it, how much would shipping be to 32210 or is it local pickup only for larger items?
|
manual
|
i need 2 things:
- 96-97 radio surround - red front bumper cover price shipped to 90046? |
Answers for all:
Rollin: White passenger door is pristine. One tiny door ding that you can see at an angle. Shipping would be fairly high with the glass, panel, motor in it. Red is good as I remember it, but must look again. adbradley: I know the red mirrors are manual, have to check the white ones-can't remember right now. UrbanSoot: Don't have a front red bumper, just a rear. I do have the radio surround from a 96. I'll get back to you on a price. Heading out the door now. |
Where in Nebraska are you at?
|
i need a drivers side power window regulator (whole assembly with cable) and a gauge cluster hood.
Thanks |
adbradley: The white mirrors are power.
mx5roadster: 15 minutes north of Lincoln fireindc: I have both. Gauge bezel is really clean. I have seen the hoods from $29-$85. Regulators $90-$159. How about $25 and $70 and I pay shipping? I can send pics first if you are interested. UrbanSoot: On the radio surround, the best price I found is $49+SH How about $40 including shipping? Can send pics first. |
how much for the red, if it is manual?
|
Originally Posted by adbradley
(Post 188738)
how much for the red, if it is manual?
|
If the red hood falls through, let me know as I am interested.
|
Originally Posted by mx5roadster
(Post 188744)
If the red hood falls through, let me know as I am interested.
|
Originally Posted by Stein
(Post 188734)
fireindc: I have both. Gauge bezel is really clean. I have seen the hoods from $29-$85. Regulators $90-$159. How about $25 and $70 and I pay shipping? I can send pics first if you are interested. |
All times are GMT -4. The time now is 10:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands