PARTOUT - Flyin Miata Turbo Miata
ALL SOLD
|
Wow. This...this is...wow. GLWS. PMd also.
|
I have sent you a pm, interested in the full kit.
|
Turbo Kit is still available.
|
Location?
NM, mobile app doesn't show location, desktop does. |
Fm turbo kit
Originally Posted by redturbomiata
(Post 1546683)
Hello Everyone,
I've decided to part out the car you may have seen in the classifieds this past couple weeks. Prices do not include shipping, but I am willing to ship any parts you want at your cost. Flyin Miata Turbo Kit+Megasquirt+ All Supporting Hardware/Lines+Electronics, $3,500, includes (AVAILABLE): Hardware: -FM Cast Log Manifold -Garret 2560R Dual Ball Bearing Water and Oil Turbo -Turbo OIl and Coolant lines will come attached to turbo if you like, so you can just plug them into your block. -FM heat shield -FM Fast Outlet -FM Downpipe -FM Silicone Intercooler Piping -FM Intercooler -FM silicone intake+MAF delete+K&N Filter+Hood Sealed Heat Shield Intake Box -Deatchwerks 750cc injectors with plug and play miata pigtails included Electronics: -GM Temp sensor with custom aluminum intercooler piping piece to thread directly into charge stream -DIYautotune boost control solenoid -AEM Wideband (sensor+gauge+all wiring) -FM Boost Gauge -Dual pod A pillar for wideband and boost gauge included -MS3x with 3 foot harness extension to miata plug and play ECU plug (plugs directly into the factory wiring harness plug with no modifications necessary) In case anyone is wondering how I decided on a price: To buy this kit new would cost $6,000+ according to what I have found for current pricing. FM wants $4700 for their similair turbo setup, MS3x costs aywhere from $800-$1200, plus I have a bunch of other goodies like boost control, lines, hoses, sensors, injectors that come along with it. I'm open to adjusting my price for good reason but I believe $3,500 is a fair price. It's all in perfect functioning condition. Roll Bar Kit $600 (PENDING SALE): Hard Dog Hard Core Double Diagonal Bolt in harness bar Roll Hoop Padding Leather padding cover Suspension $450 (SOLD): Koni Yellow Adjustable Shocks Eibach Springs Eibach Ground Control Wheel and Tire Setup, $500: MB Weapon 16x7 4x100 et38 -One wheel has a small bend on the outer lip, does not affect balance or air seal Continental Extreme Contact Sport 205/45R16 50% tread life left NB Miata Small Side Skirt + Mud Flaps Kit, $300 (SOLD): Never installed after paint Painted highlight silver metallic FM 3 IN Turbo Exhaust w/High Flow CAT, $550: This is the full system from the down pipe to tip Downpipe is sold with the turbo kit unless you really want it with the exhaust, PM me to ask Car, 2000 NB Miata, $3,500: The car will be sold after it is returned to 100% OEM form, PM if interested. Pictures below, PM for any specific detailed pictures you'd like. https://cimg6.ibsrv.net/gimg/www.mia...ee2cb9bb6f.jpg https://cimg9.ibsrv.net/gimg/www.mia...cfc6fe772d.jpg https://cimg2.ibsrv.net/gimg/www.mia...4bf3efec6a.jpg https://cimg3.ibsrv.net/gimg/www.mia...8675a52851.jpg https://cimg9.ibsrv.net/gimg/www.mia...42f557539c.jpg https://cimg1.ibsrv.net/gimg/www.mia...2ee789b9fe.jpg https://cimg3.ibsrv.net/gimg/www.mia...f263f03365.jpg https://cimg6.ibsrv.net/gimg/www.mia...a2aa60af9c.jpg https://cimg8.ibsrv.net/gimg/www.mia...5efd9b3422.jpg https://cimg9.ibsrv.net/gimg/www.mia...c7c85d62e3.jpg https://cimg0.ibsrv.net/gimg/www.mia...9ad614c3bb.jpg https://cimg6.ibsrv.net/gimg/www.mia...20ce2eb29c.jpg |
Originally Posted by Darrin Yuan
(Post 1547218)
let me know still available,my cell is 415-623-9935.Thx
OP...GLWS, I'm very tempted but would need to adapt the ECU harness to fit my '01. |
Originally Posted by Jesse99James
(Post 1547237)
:noob: Next time can you simply reply and not quote the entire post with all those pictures?
OP...GLWS, I'm very tempted but would need to adapt the ECU harness to fit my '01. |
I don't suppose you'd be willing to part out the heat shield, intercooler/piping, and intake/filter?
|
Originally Posted by CasualSpeed
(Post 1547249)
I don't suppose you'd be willing to part out the heat shield, intercooler/piping, and intake/filter?
|
If you wouldn't mind, please text me so I can try to get the turbo kit from you. I won't need the ECU, but much of the other stuff. 6019379735 if you still have it, thanks!
|
Which oil/water lines are currently on the kit? Also, does it has a blow off valve?
|
Originally Posted by redturbomiata
(Post 1547238)
I'll sell the kit without the ECU if you want! PM me.
Looks like you updated pricing after selling the injectors and ECU, correct? $2600, approximately how many miles? I'd need to source an ECU, injectors, and install a stronger clutch at a minimum. The last time I installed and tuned an MS2 it didn't go well and I gave up. The custom built ECU had at least one hardware issue and the damn LC-1 O2 sensor was flakey despite having perfect wiring (brother is an electrical engineer that verified my wiring job). Still, SO tempting...any idea on shipping to 55445? LOL! I once turbocharged a 1995 Escort GT using only the GTX manifold/turbo and a Starion intercooler figuring out everything else as I went. |
Originally Posted by The Driver
(Post 1547313)
Which oil/water lines are currently on the kit? Also, does it has a blow off valve?
|
Originally Posted by Jesse99James
(Post 1547323)
Another bump...I'd love to buy it but shipping + insurance would probably kill the deal. Plus, I don't trust it'd make it to me as you sent it (I work for USPS).
Looks like you updated pricing after selling the injectors and ECU, correct? $2600, approximately how many miles? I'd need to source an ECU, injectors, and install a stronger clutch at a minimum. The last time I installed and tuned an MS2 it didn't go well and I gave up. The custom built ECU had at least one hardware issue and the damn LC-1 O2 sensor was flakey despite having perfect wiring (brother is an electrical engineer that verified my wiring job). Still, SO tempting...any idea on shipping to 55445? LOL! I once turbocharged a 1995 Escort GT using only the GTX manifold/turbo and a Starion intercooler figuring out everything else as I went. Message me, we can work something out. |
I'm also interested, sending PM.
|
Heatshield
Would you sell me the heatshield for intake?
|
Originally Posted by redturbomiata
(Post 1547326)
The quotes for shipping I've been getting are anywhere from $150-300 depending on how far you are from me, Michigan.
Message me, we can work something out. |
Originally Posted by 1999NB
How are you handling payment, I.e. PayPal fees that cover the buyer on a large purchase such as this.
|
Originally Posted by 1999NB
(Post 1547628)
How are you handling payment, I.e. PayPal fees that cover the buyer on a large purchase such as this.
There's a couple of people that messaged me and wanted me to take lots of $$$$ off the kit+pay for shipping+paypal so I turned them down. But at asking price+shipping I'm paying Paypal fees. |
All times are GMT -4. The time now is 11:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands