PARTOUT! Turbo Stuff, 1.6L + 1.8L Stuff + NA Chassis Junk
I've decided to sell off all my newly acquired turbo stuff as well as most of the things I've gotten over the many years of ownership in favor of a nice new ND Miata..! Kind of bitter sweet, but it's probably for the better.
All stuff is located in Bakersfield, CA. I am willing to meet someone within a reasonable distance, otherwise we can figure out shipping via messages. All things will be updated on this list as I sell / find more things. It it's still up, I still have it. If using Paypal add 2.9% to cover the fees or send via friends and family. Whatever you're comfortable with! I didn't wanna upload a bunch of pictures, so if you want specific pictures of something, let me know! TURBO BITS New Ebay GT28 Oil Drain Kit - Comes with drain port adapter to barb fitting, rubber oil hose, another barb fitting, gasket, bolts, and hose clamps. - SOLD ENGINE BITS Raceland header 1.6L - Been on the car for about a year. No cracks or leaks - Asking $120 New ACL Race Bearings (Rod + Main) - Never used, works in 1.6 or 1.8 motor builds. Will come with Kings thrust bearings as well - SOLD New ARP Head Studs - Never used, still in plastic wrap, works in 1.6 or 1.8 motor builds - SOLD Toyota COP Kit - Sells on TrackSpeedEngineering. comes with 4 Toyota coil packs, wire harness, and metal plate with spacers - Asking $250 - https://ibb.co/ts6rr0G https://ibb.co/f45hX4c New Gates Water Pump - It flows water.... good.. - SOLD - https://ibb.co/2KLMCrH Stainless cone filter shield - Fits around a cone filter to sort of protect it from the heat of the headers when you just replace your air box with a cone filter. - Asking $15 NRG Stainless Radiator Diverter Plate - Goes on top of radiator support to seal off area to increase air flow to radiator - SOLD 1.6L Drive Shaft - Good condition, no bolts (I think) - $10 New 2x 2.5" single chamber mufflers - About 13" total in length. Never used. Meant to build custom dual exhaust - Asking $20 for 1 or $30 for 2 (Buy all exhaust stuff and I'll do a package deal of $60) New 2.5" single to dual single chamber muffler - Took forever to find. 2.5" single inlet to 2.5" dual outlet. Also about 13" total in length, never used. - Asking $30 (Buy all exhaust stuff and I'll do a package deal of $60) New Black cone filter + Air Flow Sensor adapter and gasket - I think this only fits the flappy door 1.6L sensor. Not 100% sure. - Asking $10 EXTERIOR BITS ARP Style Faux Carbon Side mirrors - Bought used, but never had them on my car. - SOLD - https://ibb.co/h2Gd9Sz Ebay Rear Chassis brace (Racing Beat Style) - Had it on my car for years and love it - Asking $35 New Ebay Rear Upper adjustable control arms - Comes with spherical bearings and they were never used. Got them to take camber out of rear, but got lazy. - Asking $120 New Front Carbotech XP24 Brake Pads + Rear Hawk Brake Pads 1.8L - Still in boxes, not used. - Asking $150 for them both INTERIOR BITS New Ebay Water Temp Gauge - Black with red needle. Never used. Comes with 1/8th NPT water sensor - SOLD Viper Alarm Kit V3105 - Never used, bought it and got lazy. - Asking $40 0 Guage amp install kit - Originally got it to redo battery wires, but never opened the bag.Comes with Red / Black 0GA wire, terminals, fuse, rca cables, etc. - Asking $20 NA / NB 10" Subwoofer box w/ Kicker C10 4Ohm Sub - Sealed / Black Carpeted box that is molded and fits perfect on the left side of the trunk in the little pocket - Asking $100 |
Is this all NA stuff or NB stuff?
|
I'll take it!
Put me in for the ecu and rollbar.
I'm interested in buying the entire turbo set up. Check your IG, I sent you a message. I can come this weekend. |
Pm'd
|
pm'd about the manifold
|
PMed about valve springs
|
Sorry to everyone waiting! I’m at work for a few more hours. I’ll send you all messages in the order I got them when I am able to be on my phone longer.. I didn’t expect THAT much traffic..! I’ll have fun at the post office the next few days :bang:
|
Pm’d
|
I've sent pictures and quotes to everyone so far! Quite a few things are pending and I'll update as soon as it's officially sold.
|
PM'D about megasquirt
|
Chassis brace
Still have the chassis brace? Thanks!
|
pm’d about wideband
|
Roll bar, megasquirt, wideband, turbo, manifold, intercooler kit, race bearings, head studs, and oil drain all SOLD!
I’ll update the top list as well. |
Sold both gauges, and valve springs! Have a bunch of other things pending, and will send everyone that’s requesting them photos and shipping quotes as soon as I’m home.
The top list has been updated as well. |
Hey, sent you a pm about the coolant hoses and overflow tank and haven't heard back
|
Interested!
Doing an engine build and interested in the rods and injectors
|
Originally Posted by typi314
(Post 1549110)
Doing an engine build and interested in the rods and injectors
|
Updated the list and sent messages to those that were asking. It's been a not so fun week, so sorry about the delay for those that were waiting. I'm going to start posting this stuff up on local places like craigslist and offer up, so now's the chance if you're eyeing anything! I would prefer this community to get things if they are interested.
Also, I have a full torn down NB6 motor from Japan I can sell parts from if anyone is interested! It has an identical block as an NA6, but used USDM 1.8L accessories as well as a 1.6L sized head that has solid lifters, more aggressive cams, and I think slightly higher compression pistons. Anyone building a 1.6L would probably be after the solid lifters, the better flowing intake manifold, and a few other various bits. Do some research on it, it's a cool engine! |
Hey.
Are you willing to ship the Rebuilt RX7 injectorsto Norway? |
You sir have a new PM!
|
All times are GMT -4. The time now is 02:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands