Parts for sale:DIYPNP, Frame Rails, ES Bushings, and more!
 

I am selling off the rest of my miata parts now that I have sold my turbo setup. These parts are either still installed on the car, or BRAND NEW and never installed.

DIYPNP- I built this diypnp, it is the 94-95 version, and has sequential injection installed. This is wired exactly as the spreadsheet on diyautotune says, except for the injectors are wired for sequential. The original kit is seen here:
http://www.diyautotune.com/catalog/d...kit-p-384.html. This should be plug and play for any 94-95, and require a small amount of work to fit on a 96-97. Currently installed on car.
Sold

FM Frame Rails-Brand new never installed, Includes directions and mounting hardware. Save some money off flyin miata's price.
Sold

Energy Suspension bushing kit-I bought this in the Renown Performance group buy. This is all the bushings in the master kit, MINUS THE DIFF BUSHINGS. Diff bushings were installed in a torsen that I sold. Heres the original group buy page: https://www.miataturbo.net/group-buys-member-discounts-23/energy-suspension-master-kit-groupie-61419/. Brand new in the box, never installed besides the diff bushings.
Sold

Racing Beat Tubular Sway Bar 94-97 and end links. Link seen here: http://www.racingbeat.com/Miata-1990...ars/54105.html. And includes two racing been end links and the aluminum block braces. Still installed on car
$220 shipped

Mazdacomp motor mounts-Brand new never installed, link seen here:http://trackspeedengineering.com/sto...nts-p-123.html
Sold

Coolant Reroute-I have all the necessary parts to set up a coolant reroute. All parts are brand new never installed. This includes: Begi 94-05 block off plate, begi thermostat housing, begi rear thermostat spacer, stant superstat thermostat, and the one piece hose from ?Chevy? trucks that fits perfectly with one cut. Cut has not been made. Comes with all the hardware and directions from begi that come with the begi pieces.
Sold

I will also have for sale very soon a hard dog double diagonal sport rollbar, this one: http://www.bethania-garage.com/m2_sport.htm. This bar works with all soft tops and hard tops. Hoping to find a local buyer for this. Black powdercoat has some scratches and is in fair condition.
Sold

And also soon for sale FM Level 1 clutch. Is still on my car and has been installed for a few thousand miles, maybe 4000. I'm nice to my clutch, and has been around 200 hp. I can sell this once I get a stock clutch to put onto my car. This will come with the alignment tool and override switch if I can find it, but won't come with throw out or pilot bearing.
$260 shipped


I will probably have more to put up once I look around my garage.

All parts will be shipped as soon as possible, but parts still on the car will of course take a bit longer.

PM is key if you are ready to buy something, dibs will be given on all parts on a first-pm basis.

Thanks guys!

So...much..want...so...little...money...


Any chance you'd sell the end links separately?

If I hadn't dove into my new turbo setup, the clutch, rails, and bushings would probably all be mine.

PM'd about the mounts.

Frame rails and motor mounts sold

Curly, I could sell the links separate for $60 shipped. Not a huge savings off new, but still saves a bit. I dont think I'll be able to sell the sway+braces for more than $160 w/out links.

[QUOTE=wittyworks;837031]
I will also have for sale very soon a hard dog double diagonal sport rollbar, this one: http://www.bethania-garage.com/m2_sport.htm. This bar works with all soft tops and hard tops. Hoping to find a local buyer for this. Black powdercoat has some scratches and is in fair condition.

$350 local, pm if seriously interested in shipping

witty,

I think I might have a friend in Santa Cruz who might be interested in the bar. Let me check with him. You might also want to post up on NorCalRoadsters.com if you are looking for local pick up. I've seen a few folks posting WTB ads for bars lately.

Is the mspnp the gen1 or gen2?
Would you give me a discount if I buy ms, sway bar, roll bar?
You can ship the rollbar via Greyhound really cheaply

[quote=Cxracer;837316]I just posted it up on craigslist local, and my email has been blowing up with low-ballers, hopefully I can sell it quick enough there. If its not gone in a couple days Ill post up on ncr.

The mspnp is actually a diypnp, so its ms2. I could give you a small discount for multiple items, but I think all my prices are pretty good where they are.

Thanks,
Evan

So is it the new black boxed MS they sell at diyautotune.com? this one -> http://www.diyautotune.com/catalog/m...ans-p-501.html

Its very similar to that, but it would require some slight internal modifications to have all the same features I believe.

This is the link to the diypnp that I am selling:
http://www.diyautotune.com/catalog/d...kit-p-384.html

I got it, I thought you posted the wrong link but I understand now. Let me think about it

I'm this local person, I'd be there tomorrow with cash if this was the hardcore model not the sport. As is I'm kinda interested, craiglist low ballers in the range of 300$?

Would the coolant re-route work for a 90-93?

Yes, the block off plate is only for the front thermostat housing, which doesn't have a fan switch on '94+, while the '90-'93 needs the threads for the fan switch:
http://www.bellengineering.net/index...h=5_65_240_244

Yup it's all the same stuff, but for a 1.6 it just needs a simple hole drilled and tapped. Begi said it's something like a 16mm hole but that 3/8npt works just fine.

There are two people in line for coolant reroute and roll bar is sold.

I'll take the bushings if you still have them, what's your paypal? Sorry, not enough posts to pm. if you prefer you can email it to me at euro19016v at hotmail.com

Dangit! Was about to jump on those bushings too. Pretty sure all the control arm bushings are the same from 90-05. Let me know if it does not work out.

Edit: Guh! And the reroute :facepalm:

I have one person ahead of Cosworth for the bushings, waiting on a PM back.

Rollbar and Coolant reroute sold, Bushings are pending.

DIYPNP, Sway Bar+end links, and clutch still up for grabs.

Okay I'm not getting a response on the first in line for the bushings, so cosworth dibs are yours for the bushings, and EO2K is next. I'm sending cosworth a pm, If I don't hear back from you in 24 hours I'll pass on to EO2K.

Motor Mounts shipped out today, and I'm about to package up the frame rails and coolant reroute stuff to ship.