ITBs, Engines, Wheels, Racing Beat, Springs, High Flow Cat, Injectors, Diff, OEM, etc
09-27-2014, 06:37 PM
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2013
Location: Louisville, KY
Posts: 49
Total Cats: 0
ITBs, Engines, Wheels, Racing Beat, Springs, High Flow Cat, Injectors, Diff, OEM, etc
I'm probably going to end up divorced if you all don't help me out with this. Here's what I have for sale. All parts are located in Louisville, KY. Prices do not include shipping or Paypal. Please take that into account when you make an offer.
Things I'm looking for if you want to offer a trade:
Front/rear aero
11:1 compression 83.5mm pistons
15" wheels in 8 or 9" width with non-ridiculous offset (read: functional)
Unused race tires
Carbotech XP8 or XP10 front brake pads for 1.6L
Recaro seats
Mariner trunk
ITBs for 1.6L - SOLD
Includes billet Techno Toy Tuning ITB adapter, 4 AE101 throttle bodies, a working Toyota variable TPS sensor with plug and pigtail, 4 Techno Toy silver billet aluminum velocity stacks, modified 1.6L fuel rail with rail adapter (no FPR), dyno tune for Haltech PS1000, 4-wire IACV and Haltech IACV block with ports. This is a well-sorted setup that HAS been on a car and has seen a track day and driving around town. Everything is here to make the car run properly on ITBs.
13 x 7.5" Lenso VPDs in Silver +25 offset - $500
This is a set of 4 wheels, which you can usually not find. They're silver in color and are free of major defects. Very good used condition.
1.6L Racing Beat Header - $325
This is a very nice header with exceptional flow. At one point it was cracked in a couple places but I paid to have it professionally repaired. Stronger than before. Has seen hours of on-track abuse and a 100+ run dyno session with no issues. Currently none of these in stock in the country to my knowledge.
Eibach Springs 550 lb/in 2.5" ID Pair - SOLD
Rubbed a little bit on the inside, but still 100% functional.
Summit Racing 7" Springs 350lb/in 2.5" ID Pair - SOLD
Fantastic condition and show very little wear.
265cc Purple 01-05 Miata Injectors - $50 per set
I have two sets of these. Price is per set. One came from a friend. The others came from an 86k mile engine. Work great to add E85 to a 1.6.
Kinetic Sunbelt 1.6L Spec Miata Race Engine - $600
About 5-6 seasons old as best I can tell. Was in a friend's SM and I bought it off of him and used it for a season and a half. Made 113 whp after a race in his car without accessories. Made 105 whp in my car with accessories. Made 123 whp with ITBs and E85. All Dynojet numbers. Very strong for a 1.6. I should note that I believe the cams may be slightly scarred because it leaks some oil from around the cam seals under hard driving. Fresh TB. Would make a good starter SM engine if you replace the cams. Comes with a tuned AFM.
Good 1.6L Long Nose Engine - $250
Has about 120k miles on it. Made 90 whp on a DJ like every other stock 1.6L. Great candidate for a lightweight rebuild or turbo build. Fresh WP, TB, cam seals, tensioner, idler with under 3k miles.
Open 1.6L 6" Diff with 4.3 - $150
Mileage was said to be low, but the condition of the housing is very rusty, so I'm not sure what to believe. Either way, it's in good shape internally and does quite well on the race track. No pics available as it's at the shop. Looks like a diff, though.
Magnaflow 2.25" High Flow Catalytic Converter - SOLD
Real cat, but not 50-state legal, so don't ask me to ship it California. Used for only a couple thousand miles. Very good shape.
1.6L AFM Intake Adapter - $10
From eBay. Buy either engine and I'll give it to you.
01-05 OEM Fuel Rail - $25
Comes with the fuel line to attach to the stock connector. Good shape.
01-05 OEM Flywheel - $30
Some hot spots, but nothing terrible. Could easily be cleaned up with some mild sand paper. Surface rust, but no major problems. Will need a new pilot bearing.
01-05 OEM Injector Harness - $35
Good condition. All plugs in tact. Includes the 3 wire coolant sensor and grounds.
01-05 OEM EGR Valve - $10
Unknown condition. Buy something else and I'll give it to you or give me $10 and take your chances. Came off of my junkyard race engine. Looks fine, but no guarantees.
01-05 OEM A/C Bracket - $15
Put AC back on your NB because you were a dumbass and ripped it off. It's hot out there, bruh.
Wheels:
RB Header:
Things I'm looking for if you want to offer a trade:
Front/rear aero
11:1 compression 83.5mm pistons
15" wheels in 8 or 9" width with non-ridiculous offset (read: functional)
Unused race tires
Carbotech XP8 or XP10 front brake pads for 1.6L
Recaro seats
Mariner trunk
ITBs for 1.6L - SOLD
Includes billet Techno Toy Tuning ITB adapter, 4 AE101 throttle bodies, a working Toyota variable TPS sensor with plug and pigtail, 4 Techno Toy silver billet aluminum velocity stacks, modified 1.6L fuel rail with rail adapter (no FPR), dyno tune for Haltech PS1000, 4-wire IACV and Haltech IACV block with ports. This is a well-sorted setup that HAS been on a car and has seen a track day and driving around town. Everything is here to make the car run properly on ITBs.
13 x 7.5" Lenso VPDs in Silver +25 offset - $500
This is a set of 4 wheels, which you can usually not find. They're silver in color and are free of major defects. Very good used condition.
1.6L Racing Beat Header - $325
This is a very nice header with exceptional flow. At one point it was cracked in a couple places but I paid to have it professionally repaired. Stronger than before. Has seen hours of on-track abuse and a 100+ run dyno session with no issues. Currently none of these in stock in the country to my knowledge.
Eibach Springs 550 lb/in 2.5" ID Pair - SOLD
Rubbed a little bit on the inside, but still 100% functional.
Summit Racing 7" Springs 350lb/in 2.5" ID Pair - SOLD
Fantastic condition and show very little wear.
265cc Purple 01-05 Miata Injectors - $50 per set
I have two sets of these. Price is per set. One came from a friend. The others came from an 86k mile engine. Work great to add E85 to a 1.6.
Kinetic Sunbelt 1.6L Spec Miata Race Engine - $600
About 5-6 seasons old as best I can tell. Was in a friend's SM and I bought it off of him and used it for a season and a half. Made 113 whp after a race in his car without accessories. Made 105 whp in my car with accessories. Made 123 whp with ITBs and E85. All Dynojet numbers. Very strong for a 1.6. I should note that I believe the cams may be slightly scarred because it leaks some oil from around the cam seals under hard driving. Fresh TB. Would make a good starter SM engine if you replace the cams. Comes with a tuned AFM.
Good 1.6L Long Nose Engine - $250
Has about 120k miles on it. Made 90 whp on a DJ like every other stock 1.6L. Great candidate for a lightweight rebuild or turbo build. Fresh WP, TB, cam seals, tensioner, idler with under 3k miles.
Open 1.6L 6" Diff with 4.3 - $150
Mileage was said to be low, but the condition of the housing is very rusty, so I'm not sure what to believe. Either way, it's in good shape internally and does quite well on the race track. No pics available as it's at the shop. Looks like a diff, though.
Magnaflow 2.25" High Flow Catalytic Converter - SOLD
Real cat, but not 50-state legal, so don't ask me to ship it California. Used for only a couple thousand miles. Very good shape.
1.6L AFM Intake Adapter - $10
From eBay. Buy either engine and I'll give it to you.
01-05 OEM Fuel Rail - $25
Comes with the fuel line to attach to the stock connector. Good shape.
01-05 OEM Flywheel - $30
Some hot spots, but nothing terrible. Could easily be cleaned up with some mild sand paper. Surface rust, but no major problems. Will need a new pilot bearing.
01-05 OEM Injector Harness - $35
Good condition. All plugs in tact. Includes the 3 wire coolant sensor and grounds.
01-05 OEM EGR Valve - $10
Unknown condition. Buy something else and I'll give it to you or give me $10 and take your chances. Came off of my junkyard race engine. Looks fine, but no guarantees.
01-05 OEM A/C Bracket - $15
Put AC back on your NB because you were a dumbass and ripped it off. It's hot out there, bruh.
Wheels:
RB Header:
Last edited by Mistamike17; 10-02-2014 at 09:56 PM.
Reply
0
0
10-01-2014, 03:50 PM
#12
Junior Member
Thread Starter
iTrader: (2)
Join Date: Apr 2013
Location: Louisville, KY
Posts: 49
Total Cats: 0
The SM engine is decked to the limits of stock specifications and has a lighter weight rotating assembly with matched components. If I knew exact details, I'd be building SM engines.
Reply
0
0
10-13-2014, 09:45 AM
#19
Well that sucks. I don't have the post count to send PM's, been lurking here too long reading. Oh well Screen name @ googles mail will get me, or you can pm me through the GRM board. Transport thread is here.
Grm transport network needed, Lexington, KY to Gainesville: Grassroots Motorsports forum: Grassroots Motorsports
Grm transport network needed, Lexington, KY to Gainesville: Grassroots Motorsports forum: Grassroots Motorsports
Reply
0
0
