PRICES REDUCED! NIB Web Cams, 1.6 Head(SOLD),Wiseco Pistons(SOLD), Harness(SOLD)
4 Attachment(s)
I have several items for sale from a project that I never got around to.
1 SET OF WEB CAMS BRAND NEW IN BOX GRIND #505/505 2.5(5) Bolt in profile to increase overall performance throughout RPM range. Stock springs OK.. WEB CAM CHARGES $690. ILL SELL THEM FOR $350 SHIPPED. CUSTOM PLUG AND PLAY HARNESS. TESTED AND WORKS(90-93), PERFECT TO MAKE YOUR OWN PLUG AND PLAY PIGGYBACK HARNESS $40 SHIPPED. (SOLD TO RCCOTE) WISECO 1.6L FORGED PISTONS TURBO K554M785 $410 SHIPPED (SOLD TO TREMIATA) Attachment 207765 NEW 1.6L CYLINDER HEAD (INCLUDES) (SOLD TO TREMIATA) -PORT MATCHED TO GASKET INTAKE/EXHAUST -SMOOTHED PORT PASSAGES -NEW WEB CAMS GRIND #505/505 2.5(5) Bolt in profile to increase overall performance throughout RPM range. Stock springs OK. -5 ANGLE VALVE JOB -NEW SUPERTECH 1MM OVERSIZED INTAKE AND EXHAUST VALVES Flyin miata charges $2500 for a head like this without the cams. Get it for less than 1/2! $1000 SHIPPED!!!!!! Attachment 207766 Attachment 207767 http://i19.photobucket.com/albums/b1...1/IMG_0173.jpg Attachment 207768 1 SET OF WEB CAMS BRAND NEW IN BOX GRIND #505/505 2.5(5) Bolt in profile to increase overall performance throughout RPM range. Stock springs OK.. WEB CAM CHARGES $690. ILL SELL THEM FOR $350 SHIPPED. ALL PRICES INCLUDE SHIPPING TO THE LOWER 48 STATES ONLY!! LOCAL PICKUP IS AVAILABLE AFTER 7PM IN MONTCLAIR,CA EBAY USER NAME FOR FEEDBACK REFERENCE IS JP_BLACK |
Can you take some more close ups of the head?
|
3 Attachment(s)
These are all I have for now, I tried getting better closeups but the iphone camera is pretty limited :vash:
Attachment 207745 Attachment 207746 Attachment 207747 |
ibrick/ifail FTL
|
Agreed
|
All parts are obo!!!!
|
Bump! Got a few PM's but no takers!
|
just curious what commpresion ratio would those pistons give you? maybe i didnt read something right. the cams are only good for N/A applications correct?
|
Cams are good for either NA or FI applications, I have run the profile on both. It is basically the maximum profile cam that web cam says should be run on the factory valve train. To move any bigger you should upgrade the valve springs at least.
Pistons Wiseco states are 8.5:1 Compression Ratio |
ohh I'd kill for that head....lol GL with sale!!!
|
Shipping to the UK?
Pistons only, thanks. |
wow that is one helluva deal on that head. I wish i had a 1.6 to use it one
|
I'd prefer not to ship internationally but I'll get a quote tomorrow if you PM me an address.
|
Looks like great stuff!
Unfortunately the timing is wrong for me, too late on the pistons and too soon on the cams. If there are still some cams around say julyish I may be interested. Free bump though. |
Harness is pending, responded to all PM's.
|
I have quite a few people interested in the pistons and head that are not in the U.S. I'm hoping to not have to ship internationally though. If your in the U.S. and interested let me know!
|
Where can I find more info on the cams? I'm looking for lift and duration both at the seat and .050" lift. I need the specs on the stock MSM cams too to compare.
|
You can go to the web Camshafts website to see all their specs. As far as getting the oem mazdaspeed cam specs I'm not sure.
|
I went and found the specs for ya ;p
Valve Lift:: 352/.352 Duration:: 220°/225° DURATION @ 0.050":: 200°/205° Grind#:: 505/505+2.5°(5°) Bolt in profile to increase overall performance throughout RPM range. Stock springs OK. Requires Programmable Injection. . |
Thanks, I checked out the site but the grind shows that it's for early NA's only... bummers
|
All times are GMT -4. The time now is 01:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands