Quaife, Torsen, TWM, blocks, heads and more
 

Quaife wide ratio gear set in an NB box.
Built in March 2012. Has 1000ish street miles and 6 autocross runs. Includes NB shifter $2800
I'm willing to trade / partial trade for an enclosed trailer around 7x16

1.8 diffs
4.3 Type 1 Torsen - 800
4.3 RX7 clutch type - 500
I have 2 aluminum carriers. One with Energy bushings, one with stock. First diff sold gets first choice on the carrier.

I also have a good drive shaft and pair of 1.8 half shafts for a swap - 300

99 head that's been ported, Mazda comp dual valve springs, lifters - 500
Set of Supertech 85.5mm 11:1 pistons. With stock stroke this makes 1929cc includes pins and rings - 400
ISC fiberglass hood with headlight doors - 300
Earl's oil cooler part# 41908 new no box - $100
a pair of Wilwood Dynalite calipers - 200
99 JR header - 200
16 NIB HLA's - 150

I prefer pick up of items but I can ship every thing except the hood. I don't have a good way to package it.
Shipping is at the buyers expense. Items are in the North Metro Atlanta area.

https://www.miataturbo.net/attachmen...ine=1340144208
https://www.miataturbo.net/attachmen...ine=1340144208
https://www.miataturbo.net/attachmen...ine=1340144208

head
exh dual spring
https://www.miataturbo.net/attachmen...ine=1340144208

intake dual spring
https://www.miataturbo.net/attachmen...ine=1340144208

#1 intake - you can see the injector holes are plugged for ITB injectors.
http://i339.photobucket.com/albums/n...0619-00289.jpg

#1 exh port
http://i339.photobucket.com/albums/n...0619-00297.jpg

http://i339.photobucket.com/albums/n...0619-00298.jpg

Everyone knows what a diff looks like, and NB 5 speed cases all look the same.

Are pistons new?

shiny new, pic added

can i get pics of head? i didnt know mazda offered dual coils valve springs? who did the port work? my email is ICPKORN23@aim.com

I'll get some pics of the head up this evening. I don't know who did the porting. I have a small history on it. It will at a minimum need new seals and the valves lapped.

sweet stuff!!!!

Wow! My parts are going round and round :)

Pistons have been fitted in the block when I had them but are still brand new.

What's the condition of the blocks and cranks?
Do they need to be melted down and re-cast, or would some honing of the bores do the trick?
Any idea how much shipping of a short-block to Philly would be?
Don't need rods and pistons, just block and crank.

sadly I won't get to build this one

I think a hone will suffice. At worst +.010 over size. The crank will need a buff. It was stored in a trash bag and got some light surface oxidation on the nose and first 2-3 journals.

added some calipers

head pics added. Yeah my phone sucks

Interested in the rx7 diff, but it will be a while before I can do it, just bought an enclosed trailer and have the 3rd race weekend in 5 weeks next week. Fortunately, that is it until the Runoffs. If you would like PM me some contact info so I can get a hold of you to see if the diff is still avaialble. Looks like about a month to scrape the money together.

Wow, I want those ITB's...Trade for 99 M45 kit? =D

I don;t have a use for a 45 kit :(
But I need a trailer

The head, pistons and ITB's should really go together. If they do, I'll include a Mahura 86mm head gasket. $1750 firm

need this stuff gone. Gotta find a trailer soon.

Hi.
I'm interests about wilwood and cooler.
You can send this item in Russia?

you pay for the shipping? sure

added a few things

ITB's are 45 or 48?

sadly I never measured them. It'll be tomorrow before I can do that. They're at my co-drivers house.

ITB's gone