R-package Bilstein suspension
 

I've swapped over to Xida Clubsports and I don't need my stock setup anymore. They've done well for me, surprised me everytime I pushed the car and have held up amazingly.

94 R-package suspension.
Taken off at 192k miles
154# lb/in front, 94# lb/in rear spring-rates
13" inch front shock bodies, 9 1/2" inch rear shock bodies
Stock NA top-mounts
Stock bump-stops and boot covers.

You will need to do a few things for these to be 100% fuctional. Get them revalved! They will work ok without a re-valve, still absorbing bumps and rebounding. I would highly suggest a re-valve though, there's quite a few companies that can do such a job, FatCatMotorsports or Stewart Development are the first that come to mind.
https://www.miataturbo.net/attachmen...ine=1333926776

Press out this cut bolt & sleeve, and the bushing itself. I would replace all the bushings on the shocks.
https://www.miataturbo.net/attachmen...ine=1333926776

Replace the rear top-mounts, all four studs broke off when I was removing them.
https://www.miataturbo.net/attachmen...ine=1333926776

I would also recommend some new bump-stops. Not that the stock ones are bad, but new ones with better technology will help the ride.
https://www.miataturbo.net/attachmen...ine=1333926776

Boxed up, ready to ship!
https://www.miataturbo.net/attachmen...ine=1333926776


I am asking $200 shipped OBO

PM me here or email: flier129 AT hotmail.com

Im interested on the shocks without springs and no top hats. Looks like the shock shaft threads are really rusted, will the nuts come off?

also, Ill be close to Knoxville this weekend, how much for just the shocks picked up?

PM'd :)

Bump!

bump

buy them for $120?

pm'd