Bolts onto the NB. No idea if it fits under bumper cover or not.
Attachment 228217

I want one of these but I'll have to check when I get home later, to see if it will fit with my TDR intercooler. I think it bolts up to where I have to cut the rad support

Thanks for the data point!


How are you going to win at racewars with no engines!

Saving up right now for an engine. SR20's are pulling a premium right before racewars.

:rofl:

1. gjsmith66
2. WigglingWaffles
3. Wrengel
4. Autofreak57 - Pending NB Fitment
5. ICantDo55-Pending NB Fitment
6.
______________________________
Next round of bars made

7.
8.

Put me down for one, if it clears the nb bumper

1. gjsmith66
2. WigglingWaffles
3. Wrengel
4. Autofreak57 - Pending NB Fitment
5. ICantDo55- Pending NB Fitment
6. Stealth97 - Pending NB Fitment
______________________________
Next round of bars made

7. HeelToeHero931- Pending NB Fitment
8.

Quick update.

Stewart got me the bent tubes yesterday and I got everything prepped and ready to burn today. So you guys that already paid should have tracking later today.

As far as fitment on the nb we should have a definite answer this weekend.

I want one. But concerned about loosing factory crash protection.. because idiots on the road.

In for nb1 and nb2 fitment.

Go ahead and put me down for one.

1. gjsmith66
2. WigglingWaffles
3. Wrengel
4. Autofreak57 - Pending NB Fitment
5. ICantDo55- Pending NB Fitment
6. Stealth97 - Pending NB Fitment
______________________________
Next round of bars made
7. HeelToeHero931- Pending NB Fitment
8. mrmonk7663 - Pending NB Fitment

NB fitment has been verified and I will start cranking these out as fast as I can next week to get a stock going for anyone that wants them!

Verified as in the bumper still "fits" or that it still has the same 3/8" gap as on the na?

And was it tested on an nb1 or nb2?

Verified as in still fits with 3/8 gap to bumper skin around the front bends, so same as the NA. Tested on an NB1, but there shouldn't be a problem with an NB2.

Ignore the third hole not lining up on my bar. There was a batch of plates that wasn't cut correctly and I took one of the sets for my bar since I can just re-drill the hole. We didn't use those for everyone else's.

My bumper is horribly dented from the license plate bracket and it still fit well.
https://cimg4.ibsrv.net/gimg/www.mia...e3e037c031.jpg
https://cimg6.ibsrv.net/gimg/www.mia...f0e1c96b00.jpg
https://cimg9.ibsrv.net/gimg/www.mia...2a3c2dc85d.jpg

Ordered a bunch more material today that i should get Friday. Ill have enough to make 10 more before ill need to order material again so if you want in this round put your name down below! Also due to the water jet company i ended up with a handful of blemished plates mentioned in the above post. They are functionally the same as all the other bars but will need and extra hole drilled by the end user. I can offer these at a discounted price but you will have to drill the final mount hole in the plate. I will lay out where it is supposed to be but final drill and verification will be on the user since it wont have a slot for wiggle room.

1. gjsmith66
2. WigglingWaffles
3. Wrengel
4. Autofreak57 - Pending NB Fitment
5. ICantDo55- Pending NB Fitment
6. Stealth97 - Pending NB Fitment
______________________________

1. HeelToeHero931- Pending NB Fitment
2. mrmonk7663 - Pending NB Fitment
3.
4.
5.
6.
7.
8.
9.
10.

Discounted bar with blem plate

1.
2.
3.
4.
5.
6.

I’m definitely in for one. Let me know what to do to firm up the order.

Your bar is next in the line. Sent you a pm

Payment sent. Thanks!