SamNavy getting out of the game
 

It's not all that bad... the wife just finally put her foot down. I've got 2 kids in diapers, so time to sack up and put the Miata on hold. Don't worry, the income from this sale will fund a Cobb Accessport and rear-differential brace for my MS6, so I'm keeping it real.

Rules: Paypal only. Shipping is included in all prices to the lower 48 via whatever method is cheapest at Postal Annex and will be in the mail in under 5 working days. Prices are set for now.

Brand new 26" 4-AN oil feed line with T-25 oil inlet adapter: SOLD

DSM BOV... can't remember if this is a 1G or 2G. I had flutter problems with it and do not think it's opening correctly, but also do not think it's broken... could have been operator error on my install or need the piston lubed or something. Attached is the welded T-fitting it came with a ghetto JBWeld T-fitting I made up: SOLD

Kia Watenecks: these are like $13 new at a dealership, so they're basically worth shit. I'll take $5 but you've gotta buy something else so I can throw them in the same box and don't eat it on shipping. SOLD

Advanced Autosport 4-line braided brake kit: SOLD

Boundary Engineering Billet Oil Pump Gears in original plastic: SOLD

The Original Gtech... I mean the first one, like Commodore64-Style: SOLD

949 Rods, still wrapped in plastic. SOLD

RX7 550's. The guy I bought these from told me they'd been cleaned and flowed but did not have the paperwork... I'm asking about halfway between a dirty set and a cleaned/flowed set because I just don't know... but I was going to drop these in and run them without hesitation: SOLD.

Protege Valve cover for 1.8 in great shape. Includes small PCV valve hose and sketch valve, plus plug-wire retainers. $45
http://i277.photobucket.com/albums/k...valvecover.jpg

ProComp 20psi boost gauge: $30 GAUGE POD SOLD ALREADY
http://i277.photobucket.com/albums/k...le/ProComp.jpg


Nordlock Washers. 8 still stuck together and 5 singles... enough to do your mani and DP. FM gets $2.75 a piece for these things. $10.
http://i277.photobucket.com/albums/k...e/Nordlock.jpg

3" MAF/Filter adapter: $10
http://i277.photobucket.com/albums/k...terAdapter.jpg


Brand new 3.636 R&P still in factory plastic and original box, and coated in assembly grease. $400
http://i277.photobucket.com/albums/k...e/36Gears2.jpg

$50 shipped for the valve cover? 32605.

Never mind.

I'll take all three Kia waternecks and Rx7 550cc injectors. $105??

Single universal pod for sale? You could box it up with azndragonx, we live close enough that we would see each other eventually.

Would the brake and clutch lines work on a 94 (might be a noob ?) Pm me thanks

The MSM exhaust cam has the same specs as the 99/2000? Are there turbo people that have actually done this swap?

If it is the same specs, I'll take it. PM me your paypal email.

Also, let me know if the AP does for your MS6.

Brake and clutchlines will work on any year Miata 90-05, but brakelines are sold.

MSM Exhaust cam I believe is the same as for 99-00 BP4W heads. The MSM intake cam I know for sure has a smidge more opening and duration as per a detailed thread by Emilio over at m.net.

The Heliums are the universal standard:
Mazda Performance Parts: Konig Helium 15x6.5 Silver 40mm offset OUR MOST POPULAR MIATA WHEELS---SALE!
Goodwin gets $400 for these... and again, except for the miniscule bit of rash, they're perfect. The tires are completely shot, one has a nail in it and is flat. I have floorjacks and a pump... if you wanted to come over, mount them, and drive them home, I'm sure you'd make it... but 2 of them are a few atoms of rubber from showing cord.
https://www.miataturbo.net/forum/vbg...etimage&id=159

I guess this is the thread you are pointing to:
BP5A-12-420 cam specs - MX-5 Miata Forum

I'll have to digest the info. The MSM cam has less duration but more lift than an 99 intake cam. I'll have to compare to my current cam timing with the 96 exhintake and adjustable gears on both.

PM'd

Here sam.

MiataRoadster: Mazda factory parts

- 3.6 final gear prices.

Isn't a new mazdacomp 3.6 $400? I hope it is $600 since I just bought a used one for $360 :(

Thanks for the info, thread updated!
OPG's sold among other things.

How much for the boost gauge and the maf adapter shipped to 77063?

dude why couldnt you have waited a lil longer on doing this! cause i really want those rods, and the 3.63 R&P.......... :cry:

$40

How much for the Dora the Explorer Kitchen?

J/K ... I feel your pain. :)

Are those good lug nuts that are coated in a cheap plastic coating that will chip off and then start to rust like mine are currently?

PM'd about rods

Just went out and checked 'em, look nice&shiny after about 5 years of use. Never been hit with an impact wrench, always by hand. Bought from Goodwin, legit.

on the 949 rods what kind of rods bolts are there arp 2000?