Shibby's Partout Thread (2 of ?) - Quality goods within
17 Attachment(s)
Continuing Partout Thread below in Post #3
See Part 1 here: https://www.miataturbo.net/miata-par...-within-99272/ See Build Thread here: https://www.miataturbo.net/build-thr...-breaks-88725/ Contact info for lurkers: jamesblakeellis at gmail dot com Happy to take any additional pictures you may need. JDM/EUDM, yo floormats - Great condition (will vacuum before shipping) - Designed for RHD, so not a perfect fit, but close. Attachment 228239 Attachment 228240 Attachment 228241 Attachment 228242 Attachment 228243 Attachment 228244 NB 1.8 Squaretop/Flattop Intake Manifold - Powdercoated Silver - Full disclosure - this had blast media run through it previously. I've cleaned the hell out of it and ran it on my car for the last 1k miles with no ill effects. Price takes this into account. Attachment 228245 Attachment 228246 Attachment 228247 Attachment 228248 Attachment 228249 Attachment 228250 Attachment 228251 Attachment 228252 Attachment 228253 Attachment 228254 Attachment 228255 https://www.ebay.com/itm/ISR-Perform...7/302993010801 https://i.imgur.com/19IvOUd.jpg Will separate if requested. $215 each if separating. https://i.imgur.com/kurzICM.jpg https://i.imgur.com/vwBVN0R.jpg https://i.imgur.com/sBwb9TX.jpg https://i.imgur.com/naf8VfW.jpg https://i.imgur.com/qZrPAcg.jpg https://i.imgur.com/urjNy0i.jpg Melty bumper bits included for no extra charge! https://i.imgur.com/urjNy0i.jpg https://i.imgur.com/Np0n8VG.jpg https://i.imgur.com/8MnE5y5.jpg https://i.imgur.com/R9dXN05.jpg https://i.imgur.com/ym56FJZ.jpg Has Revlimiter EUNOS label on it. He can make you a replacement label if you'd like one, they're 42mm - he charged me $20 a few years ago. Your results may vary. :) Also, the rubber seal is pretty hardened. Recommend replacing. It still works though. https://i.imgur.com/gJhhGiT.jpg https://i.imgur.com/mUtEvS1.jpg https://i.imgur.com/3u1dx6l.jpg Read about removing the stitching and why at the below links: https://forum.miata.net/vb/showthread.php?t=462529 https://forum.miata.net/vb/showthread.php?t=401146 There's also a small writeup in my build thread about these. https://i.imgur.com/zo0t5R1.jpg https://i.imgur.com/UgIhVLx.jpg https://i.imgur.com/ALvd8tX.jpg https://i.imgur.com/WWfWK5H.jpg https://goflowforce.com/products/miata-fuel-rail-spacer Recommend purchasing one new lower cushion. Search 'Injector Dynamics -204 Lower Cushion for ID Injectors' - See first pic, far right. Tweaked one of the cushion retainers - doesn't affect performance. See second pic. https://i.imgur.com/Egk9XwH.jpg https://i.imgur.com/KpV2K5S.jpg I literally bought this last week and finally decided to part out while this was at the powdercoater.
https://i.imgur.com/RCR32vv.jpg https://i.imgur.com/cWutxg4.jpg https://i.imgur.com/83b2xmN.jpg https://i.imgur.com/NgP8O0v.jpg https://i.imgur.com/XTc0yLL.jpg https://i.imgur.com/NTO0pk0.jpg https://i.imgur.com/ic9zUIq.jpg https://i.imgur.com/MfrkoZ7.jpg https://i.imgur.com/n4ojQ7u.jpg https://i.imgur.com/YdleMJ7.jpg https://www.flyinmiata.com/turbosmar...valve-kit.html https://i.imgur.com/ms3RAha.jpg https://i.imgur.com/62tV8iq.jpg https://i.imgur.com/C5JEl2C.jpg https://i.imgur.com/NUfHhmm.jpg https://i.imgur.com/1KF34Tv.jpg https://i.imgur.com/Nl5B1F7.jpg The hazard/headlight set has a bulb out. The switch comes with or without, you can decide if you want it. https://i.imgur.com/5n7gz9D.jpg https://i.imgur.com/NcLIyXY.jpg https://i.imgur.com/Mzi4ryT.jpg https://i.imgur.com/KWSsRke.jpg https://i.imgur.com/ZlYJvnI.jpg https://i.imgur.com/r2d114g.jpg This is how I adapted the hoses to the hard lines. Not sure what a better way is, but I don't really recommend this method, it was painful to mount and I fought leaks for a while. These pieces are NOT included - simply showing how I mounted to the hard lines. https://i.imgur.com/mg78MtT.jpg |
Pm sent
|
[Deleted]
|
PM sent
|
[Deleted]
|
Astroboy, please clear your PM's. Not able to respond to your latest message.
|
Injectors sold.
I also organized the thread better. I'm a bit more flexible on pricing now. |
Gauge hood sold - prices adjusted.
|
All times are GMT -4. The time now is 06:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands