Stealth N/A Turn signal headlights GB#2!
***Due to personal issues, and shipping delays GB Closed early 11/13! I would not be able to deliver another 5 sets on time at this point***
All, I've finally secured suppliers for the next round of Stealth NA headlights! Availability: Up to 10 sets Close date: November 19th Target delivery: Early/Mid December. Inspired by Aidanj's guide here.This is what you get: -2 Genuine Hella 60mm low beam projector modules w/55w bulbs and mounting hardware - Switchback halo lights (white/amber) for parking and turn signal attached to the projector - Plug 'n Play wire harnesses for headlights / turn signals /park lamps - Modified crystal clear depo turn signal housings - Shipping, tracking, insurance within U.S. - detailed installation instructions - Weight savings and much more light output! - each unit tested before shipment Things to consider: - This is low beam only, but it's been my experience so far this is plenty of light on a street car. Light output is far better than stock low beam. - when it comes to headlight covers, you're on your own. There are several options here, including race hoods without headlight cutouts, or the nice rivet on brackets from Singular motorsports. - I don't know the lighting laws in your area, so its going to be up to you to make sure you're not violating any laws. - your turn signals will flash fast. I don't currently provide a solution for that - but there are DIY writeups out there. - Moisture buildup behind the parking light lenses will sometimes happen. This is due to the modified lenses having an open back to accommodate the projector. - This WILL require cutting on on your car in the front apron area to accommodate the size of the projectors. You will still be able to go back to your stock headlights - and those cuts won't be visible - but a car is only original once. Priming & painting the cut area to prevent rust is STRONGLY recommended Payment: - $100 deposit to get on the list - $190 final payment to cover balance before shipping early/mid December ($265 +$25 shipping) - Paypal - mx5tuner at gmail.com - yes, cost has come up since last time. It's still the lowest cost, lightest weight headlight kit out there. - I'd like to drop the price if we hit a certain number, but I'm just not moving enough of these to get any volume discount. Deposits received: 1. alienmiata1 2. Ben AZ 3. wildmiata 4. leboeuf 5. Jitwontee Now for Pics! Mounting: https://farm2.staticflickr.com/1866/...2c03de66_z.jpg Untitled by me, on Flickr Installed: https://farm2.staticflickr.com/1812/...4ed853fb_z.jpg by me, on Flickr https://farm1.staticflickr.com/862/4...0801a588_z.jpg Untitled by me, on Flickr Light output https://farm1.staticflickr.com/858/4...8a142360_z.jpg Untitled by me/url], on Flickr https://farm2.staticflickr.com/1836/...cc919244_z.jpg Untitled by me, on Flickr https://farm1.staticflickr.com/937/2...7ef007df_z.jpg Untitled by me, on Flickr Any questions? Email me! mx5tuner at gmail.com |
I’m in. Payment sent |
Im in ill send $$ when off work
|
I'm in!
|
OK guys - I know there are some people waiting until near the end of GB to get on board - but if we can go ahead and get two more orders I can most likely deliver the first batch of 5 early!
|
I'm in. Deposit sent.
|
Originally Posted by leboeuf
(Post 1510172)
I'm in. Deposit sent.
One more and I will begin ordering parts. If that comes today or tomorrow, we could be about a week ahead of schedule. |
Deposit sent
|
[QUOTE=Jitwontee;1510467]Deposit sent[/QUOTE got it, will update the OP when I’m on a real computer. thank you! |
All,
5 deposits have been received. All of the parts to assemble the kits are scheduled to arrive by November 21. Because of some of the delays associated with some parts of the kits, and the fact that I have to prepare for the holidays and other issues, I have to close the group buy today. I simply would not have time to prepare another 5 kits for early/mid December. If there is still demand I can do another run in January. To those who have sent deposits - Thank you! and your kit will be available on time. |
Looks like all the parts have arrived! Will start assembling kits over the holiday.
|
Awesome! Thank you for the updates!!
|
Another quick update... All of the housings are done, and the halos have all been wired up. The harnesses are going to look sweet with the red/black sleeving.. Here are the halos
https://farm5.staticflickr.com/4846/...499b354a_z.jpg Untitled by me, on Flickr |
Sweet! Looking forward to getting these installed.
|
Most of the halos were attached tonight, just the final wiring remains.
Hella shorted me some hardware, unfortunately. As soon as I get that hardware in and get these wired up, we will be good to go. I suspect these will be completed this weekend, and I'll be ready to accept final payment and ship Dec. 3rd. |
Ok Guys, made some great progress over the weekend. Everything is complete except for wiring for two halos, and the previously mentioned hardware issue. I should be ready to accept final payment in the next day or so. Until then, here's a preview of some of the completed halos/projectors. These have all been tested on my car and are working great. I really liked how the wiring turned out. The red/black techflex is really sweet.
https://farm5.staticflickr.com/4812/...5b3f78cc_z.jpg Untitled by me, on Flickr https://farm5.staticflickr.com/4887/...d0c57559_z.jpg Untitled by me, on Flickr |
Looks great thanks for the updates
|
Just let us know when you're ready for final payment! I'm so ready to get these installed.
|
Originally Posted by wildmiata
(Post 1513461)
Just let us know when you're ready for final payment! I'm so ready to get these installed.
I also can't wait for you to get these installed. I haven't had any feeback yet from the last GB :( |
Originally Posted by Stealth97
(Post 1513487)
I also can't wait for you to get these installed. I haven't had any feeback yet from the last GB :( |
Originally Posted by Ben AZ
(Post 1513511)
Really? I already have my bumper off and just finished the Singular light brackets last night. I was going to ask for the instructions sooner than the projected ship date just so I could cut everything needed ASAP. LOL
Nice! how do you like the singular brackets? I will make some minor updates to the instructions and send you the link. |
Originally Posted by Stealth97
(Post 1513525)
Yep.
Nice! how do you like the singular brackets? I will make some minor updates to the instructions and send you the link. |
Can i get a copy of the instructions too
|
Originally Posted by matrussell122
(Post 1513536)
Can i get a copy of the instructions too
Good news guys - just finished the last few bits and the kits are all tested and ready to ship! Please send final payment and I'll get them out as soon as I can. Fedex w/insurance & tracking. |
Money sent! Can’t wait to get mine! |
Thanks to those who already got final payments in. I shared the instuctions link with everyone.
|
Very nice and well thought out write up :bigtu:
|
Originally Posted by matrussell122
(Post 1513670)
Very nice and well thought out write up :bigtu:
|
Sent final payment would like instructions as well. Jitwontee@gmail.com
|
Originally Posted by Jitwontee
(Post 1513834)
Sent final payment would like instructions as well. Jitwontee@gmail.com
|
Ok folks, These will be getting shipped out Tuesday.
|
Originally Posted by Stealth97
(Post 1514167)
Ok folks, These will be getting shipped out Tuesday.
|
Unfortunately these did not go out today. Chaos at work prevented me from getting to FedEx before they close. These will go out tomorrow. |
Got mine today! They look great! Can’t wait to get them installed! |
Post install pics
|
Originally Posted by alienmiata1
(Post 1514786)
Got mine today! They look great! Can’t wait to get them installed! |
Helps only being 200 miles away! I’m hoping to get these installed this weekend and will post pics when I’m done! |
I got my lights yesterday and started the disassembly today. I got the headlights out and realized the the fan relay on passenger side and the hood prop on driver side both use the headlight bracket. I would like to delete all related brackets so what have you guys that also have the new lights come up with to relocate those things?
|
Originally Posted by wildmiata
(Post 1515065)
I got my lights yesterday and started the disassembly today. I got the headlights out and realized the the fan relay on passenger side and the hood prop on driver side both use the headlight bracket. I would like to delete all related brackets so what have you guys that also have the new lights come up with to relocate those things?
|
Hood pins are not a bad option, but then what do you use to prop the hood open when working in the bay?
|
Originally Posted by wildmiata
(Post 1515076)
Hood pins are not a bad option, but then what do you use to prop the hood open when working in the bay?
|
Both my Miatas have had good struts - so this is a problem I did not even think about. You’ll either need to get struts, or keep the hood prop in the trunk and prop it somewhere when working on the car. for the relays, I bolted mine down to the lower radiator overflow bolt. |
Originally Posted by Stealth97
(Post 1515086)
Both my Miatas have had good struts - so this is a problem I did not even think about. You’ll either need to get struts, or keep the hood prop in the trunk and prop it somewhere when working on the car. for the relays, I bolted mine down to the lower radiator overflow bolt. |
Originally Posted by wildmiata
(Post 1515105)
That was what was thinking of doing with the relays, did you have to make the hole larger to fit? Looks like a different size bolt.
|
Anyone get their kit installed yet?
|
Got mine installed today. They look great! Really cleared up a lot of room in the engine bay. https://cimg5.ibsrv.net/gimg/www.mia...938a24959.jpeg |
Originally Posted by alienmiata1
(Post 1518856)
Got mine installed today. They look great! Really cleared up a lot of room in the engine bay. https://cimg5.ibsrv.net/gimg/www.mia...938a24959.jpeg |
Originally Posted by wildmiata
(Post 1519147)
What did you find best to get the lights aimed and pointed in the right direction? If you remove the clear lens from the bumper, could you get to the adjusters?
I start with them cranked as tight as possible, then loosen each corner until lined up. |
Been workin so much took awhile to get these installed but i finally did any they exceeded my expectations very cool thank you
|
Well the car has not moved since i installed the headlights and one halo is already not working. It seems to be on the projector connector that connects to the harness if i play around with the wires i can get it to turn on so i gotta dig into the hot melt and re wire it
|
Originally Posted by Jitwontee
(Post 1524712)
Well the car has not moved since i installed the headlights and one halo is already not working. It seems to be on the projector connector that connects to the harness if i play around with the wires i can get it to turn on so i gotta dig into the hot melt and re wire it
I don’t have any halos in stock right now since I’m not planning any GB but I can get a new one for you. |
No its fine a fixed them already the pin in the connector wasnt all the way in not hard to do just wanted to let others know to double check before completing the install
|
Originally Posted by Jitwontee
(Post 1525051)
No its fine a fixed them already the pin in the connector wasnt all the way in not hard to do just wanted to let others know to double check before completing the install
|
Finally got my headlights installed. You cannot access the upper screws to adjust headlights with bumper on. My right headlight has a weird shadow blocking a portion in front of the car. Any ideas how to fix that? Pulling the bumper tomorrow to better aim the lights I have to get them pointed down a bit more
https://cimg7.ibsrv.net/gimg/www.mia...c95dd765e1.jpg |
Originally Posted by wildmiata
(Post 1533658)
Finally got my headlights installed. You cannot access the upper screws to adjust headlights with bumper on. My right headlight has a weird shadow blocking a portion in front of the car. Any ideas how to fix that? Pulling the bumper tomorrow to better aim the lights I have to get them pointed down a bit more
https://cimg7.ibsrv.net/gimg/www.mia...c95dd765e1.jpg it may be best to adjust them one at a time so you’re sure what light is doing what. Unplug one side or throw a blanket over one side to do them one at a time. |
The projector is upside down?
|
Originally Posted by acedeuce802
(Post 1533775)
The projector is upside down?
The main cutoff line you see is actually for the left, pointed way too far right. The cutoff line for the left one is way high, just under the SUV in the pic. I asked him to point the right projector further to the right. The right projector is also pointing too far inward. You can see the cutoff just below the SUV in the background, |
keep both
Just bought a pair and was wondering Any way to keep both your popup lights and these?
|
All times are GMT -4. The time now is 01:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands